April 21, 2017

Should you get 3320-01 120-Volt (SKIL) at this price?


Graphs

How SKIL 3320-01’s price changed over last several months:
You can see the trends in 3320-01 cost change
Drill 10-Inch 120-Volt reviews compared with other similar products:
Analysis of 120-Volt Drill 10-Inch with other products

Info

Features:

  • Enter your model number above to make sure this fits.
  • Depth Adjustment System
  • LaserX2 2 Beam Laser System
  • 0-45 degrees left and right tilting work surface
  • 5 Speeds – 570 – 3,050 RPM
  • 3.2 amp motor
Other Info for this deal:

Warranty: standard manufacturer’s warranty
S&H: Free shipping if ordered online
Dimensions and weight: check our reviews
Coupon/Sale: n/a


General description

Will include 10 in. Drill Press with Laser – 3320-01, Cast Iron Base/Work Table, (2) AA Batteries, Chuck Key.




Compare with similar products:

SDT HSS Annular Cutter 13 PC Kit 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" &a

SDT HSS Annular Cutter 13 3320-01 PC Kit 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″, 13/16″, 7/8″, 15/16″, 1″ & 1-1/16″ 1″ Cut DepthHigh speed steel annular cutter kit (11 Annular Cutters & 2 Pilot Pins)will include the following annular cutters: 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", and 1-1/16"Cutting Depth: 1”3/4" Weldon ShankCuts holes in steel precisely, quickly & safelyLarge holes may be drilled up to ten times faster than regular drills bitsMake overlapping holes, slotting holes and edge cutsMade from tough, high-speed tool steelMachine-finish hole-no reaming needed when used with LubricantEach particular size laser etched on shank4. 74mm x 77mm (. 18" x 3") Pilot Pin (Pilot pin helps find center of hole place)6. 34mm x 77mm (. 25" x 3") Pilot Pin (Pilot pin helps find center of hole place)With carrying case.


Steelmax SM-D1 Portable Magnetic, 1-3/8" Diameter x 2" Depth of Cut (Maximums)

The D1 is an super-compact magnetic drilling machine that can cut holes up to 1-3/8″ in diameter in material to 2″ thick. The D1 is very lightweight at only 22 lbs.   Its maintenance-free rail guide system removes alignment issues, minimizes run-out and decreases cutter breakage. The D1 comes with an electromagnetic Energy Saving Base (ESB) that uses only 50 power when the motor isn’t under load, considerably rising the operating life of the electromagnet. The D1 is equipped with a Magnetic Field form Control (MFSC) system that gives maximum holding power on thin material, down to ¼”. A Magnetic Power Adhesion Control (MPAC) module detects the sticky force of electromagnetic base to insure adequate holding power for safe operation.


SHOP FOX M1110 6-Inch by 21-Inch Variable Speed Mill and

Enjoy the precision ground dovetail column that lets for fast and easy tool changes without having to re-register the spindle centerline. The Z-axis handwheel with the completely geared lift system easily lifts and lowers the headstock up to 14-3/4-inch. A 3/4 HP reversible variable-speed common motor drives an all-steel geared Hi/Lo range gear box which drives the 60mm diameter quill and R-8 spindle. The precision ground cast iron milling table with coolant troughs and drain will accept an aftermarket coolant system and power feed. These features joint with the remaining X and Y table travel of 5-3/4 x 15-1/2-inch make the M1110 Mill/Drill one of the most well-liked units available. Made in an ISO 9001 factory.


Portable Magnetic, 22.7 lb., 120V

‘ Magnetic Drill Press, Voltage 120VAC, Capacity Steel 1-3/8 In. Drill Travel 1 In. 5/8 In. Spindle Taper, 8. 0 Amps, No Load RPM 450, Magnet Type Dual Coil, Drill Point Pressure 735 lb. Drill to Center From Base 1-3/8 In. in general Height 7-13/16 In. Tool Length 11-11/16 In. Tool Weight 22. 7 lb. Reversible No, will include Carrying Handle and Carrying Case Included ‘.


Champion Cutting Tool RotoBrute MightiBrute AC50 Portable Magnetic : Up to 2-1/8" diameter, 2" depth of cut

Champion Cutting Tool’s RotoBrute AC50 is a powerful, lightweight magnetic drill press for drilling holes up to 2-1/8″ diameter and up to 2″ depth. It’s easy to maneuver and the fast change arbor lets annular cutters to be changed in seconds. The QX1234 drill/chuck adaptor easily changes from annular cutters to turn drills, which is included with this model. The AC35 is ideal for the steel fabrication and construction business, truck/trailer frame fabrication, plant maintenance, refineries, power generation, mining, bridge work, and ship building industries.


Grizzly G9969 Radial vs SKIL 3320-01 10 pricing

Intended by us this drill press is well-liked with both wood & metalworking shops that have bulky projects. Head spins 360° & tilts 45° left & right. Swing is a big 45-Inch (you may be able to drill in the center of a 45-Inch diameter round part) & spindle may be brought close to the column with the uniquely intended swivel post. Slots in table let you to use varieties of clamps. Plans: • motor: 1 hip 110v/220v single-phase prewired 110v • swing: 45-Inch • drill chuck: 1/64-Inch-5/8-Inch • drilling capacity: 1-1/4-Inch steel • spindle taper: mount #3 • spindle travel: 3-1/4-Inch • number of speeds: 12 (200-3000 rpm) • quill diameter: 2. 950-Inch • major column diameter: 5-Inch • maximum distance spindle to base: 36-Inch • base size: 18-1/2-Inch x 39-1/2-Inch • head swivel: 360° • head tilt: 45° l & r • t-slots: 5/8-Inch large • in general height: 51-Inch • estimated shipping weight: 525 lbs.


Kreg DK5100 3/4 Horsepower 5-Spindle Pneumatic Pocket Hole Machine

New to the market, the DK5100 multi-spindle pocket hole machine drills up to five pocket holes in one machine cycle. The machine holds 5 separate drill motors mounted 6 on center. Each drill motor may be individually actuated for the capability to drill one, two, three, four, or five pocket holes at a time. The capability to individually actuate any one of the drill spindles with the 6 on center choice makes these machines perfect for drilling pocket holes in panels to make cabinet sides, floors, walls, and drawer box parts. Like the Kreg single spindle pocket hole machines, the DK5100 features to 1-1/2 screw centering capability, hardened steel drill guides that maximize drill bit life, swing stops that ease material positioning, and a one-touch foot pedal that fires all spindles at one time.


Jancy Magforce Portable Magnetic-Base, 120V, 10.2 Amp Motor, 1-5/8" Diameter x 2" Depth Capacity vs SKIL 3320-01 10 review

Jancy Magforce mag drills offer dependability, safety and versatility. The Magforce is intended to be used in close quarter drilling like between beam flanges or where there are height limitations. Only Jancy offers integrated safety shields and “Smart magnet” circuitry that doesn’t let the drill motor to turn on in unsafe magnetic holding conditions. Smart Magnet circuitry will also shut down the drill motor in the not likely case of the drill breaking away from the workpiece. The Jancy Magforce movable magnetic drill is made in the USA and comes with a 1 year factory warranty.


Yosoo Mist Coolant Mist Lubrication System Used for CNC Lathe Milling Machine (save-energy type)

Air flow is adjustable. Spray mist volume is adjustable. Extend the life time of the machine. Clean, decrease temperature well. It’s easy setup, shinny finishing for metal merchandise. Adaptable functions as cooling, lubrication and blowing the metal chips may be performed simultaneously. Intended and made for improving machine capability, cutting speed, and extending tool service life, Saving working time and production cost.


HJ-4 Multi-in-one Magnetic Heating Stirrer vs SKIL 3320-01 10 price

HJ-4 Multi-in-one Magnetic Heating Stirrer vs SKIL 3320-01 10 price The product typically takes 7 – 13 business days to arrive to your hand after your order is confirmed Product Description HJ-4 Multi-in-one Magnetic Heating Stirrer vs SKIL 3320-01 10 price with a single-point and multi-point functionality while stirring, a mechanical timer, simple operation, stepless speed in a large range of stable liquid solution precision mixing, particularly for small volume samples for comparison mixing and testing, petroleum, chemicals, pharmaceuticals, environmental, biochemical laboratory, analysis room, an indispensable tool for education and scientific research. Technical Datas Speed range:start up1600rpm,stepless speed modification Heating power:4120W Stirring power:425W Platform Dimension(mm):4120 Capacity:41001000ml Time:0 – 120 minutes(or with no bound) Dimension(mm):600280125 Weight:8kg Voltage:110V 60Hz NOTE: we’ll send the product to you as early as possible If you have any questions, feel free to contact us.


RIKON 30-230 17-Inch Floor

30-230 Size: 17″ Features: -Drill press. -Rack and pinion table height. -Clutch depth stop. -Powerful, economical and smooth operation. -Set your drill depth easily and precisely. -Great  for repeatable drilling. -Adjusting table height is easy with the turn of a handle. -16 Spindle speeds (200-3,630). -17-in. : 65" H x 14" W x 17" D. -20-in. : 68" H x 18" W x 20" D. Construction: -hard steel and cast iron construction. -Rugged heavy responsibility construction for vibration free operation. Plans: -Powerful 1 HP induction motor. Warranty: -maker gives 5 years warranty.


CRL 2-Speed Pro ing Machine by CR Laurence vs SKIL 3320-01 10 reviews

With this CRL Two-Speed Pro Vertical 110 Volt, 60 hertz Drilling Machine you get the finest in European glass drilling technology. This precision drill machine offers a tough two-speed, 110 volt, 60 hertz motor able of running at 1650 or 3280 RPM. The twin guide posts permit smooth travel of the drill head and exact alignment of drill bits to the glass surface. The spring-loaded front post gives enough resistance for effortless control of the drilling depth.



What people considered before buying 332001:
  1. IRWIN 4-Inch Drill Press Vise (226340)
  2. DELTA 20-621 4-Inch Drill Press Vise
  3. Wilmar Performance Tool W3939 Drill Press Vise, 2-1/2-Inch
  4. Bench Dog 10-035 Bench Cookie Work Grippers, 4-Pack
  5. SKIL 3386-01 2.5-Amp 9-Inch Band Saw
  6. MLCS 2326 Drill Press Table and Fence with T-Track Hold Downs Included


Models to consider:
0904102HOU HMD150HMD917 75-260 M1HMD914 SDT-MD101
PDM108 DK3100NIT UOJ-3500 DPQS-017DP3FENCE EVO42
KBM 50QX DFH036DP801 HICO-DP4116Q0904101HOU 0505102HOU
G9969 SDT-AC2-15625WSPB1000E TYP-75MB-FMM3 7010S-10
SM-D1 PRO SDT-AC1-KIT-13PCSDT-AC2-13125WS M1110AC50 SDT-AC2-KIT-13PC
USA101 F4296HMD130 SDT-AC1-KIT-7PCSDT-AC2-20000WS HICO-DP4116
SDT-AC2-15000WS AC35SM-D1 DK5100RB32 EVOMAG28
CK-SCY-42HD SDT-MD-JIC-28CEQ100 WA-3500MAG 28 LTX BRM35AB2HSS
BRM-35A-B MD-6000TYP-28A 0115101HOU18Y170 MWS-808PD
0115101HOU SDT-AC2-13125WSHMD914 ZZ-032201MAG 28 LTX BRM-35A-B
WA-3500 0904101HOU0904103HOU G9969PDM108 MD-6000
AC50 MWS-808D0904102HOU MB-FMM3SDT-MDC-WS-13MM DP3FENCE
USA101 HMD130HICO-DP4116Q 18Y170DFH036 HMD150
AC35 SDT-MD-JIC-28CNIT UOJ-3500 RB32PRESSA6T PRESSA20T
HICO-DP4116 SM-D1SDT-AC2-20000WS SDT-AC2-15625WSSDT-AC2-KIT-13PC M1110
BRM35AB2HSS KBM 50QXDK3100 SDT-MD40TYP-28A EQ100
PB1000E TYP-7575-260 M1 SDT-AC2-06875WSBRM-35A 7010S-10
CK-SCY-42HD F4296SM-D1 PRO DP801EVO42 DK5100
ZZ-032201 0904101HOUF4296 PRESSA20TSDT-AC1-KIT-13PC PDM108
DK5100 SDT-AC2-13125WSHMD130 HICO-DP4116PRESSA6T SDT-MDC-WS-13MM
0115101HOU HMD914BRM35AB2HSS HJ-4EQ100 MD-6000
TYP-75 SDT-AC2-06875WSMWS-808PD USA101RB32 SDT-AC2-KIT-13PC
SDT-MD40 SDT-AC2-20000WSTYP-28A EVOMAG28AC50 0505102HOU
SDT-AC2-15000WS BRM-35A-BG9969 SM-D1MAG 28 LTX EVO42
CK-SCY-42HD 18Y170MB-FMM3 75-260 M1AC35 NIT UOJ-3500
DPQS-017 HICO-DP4116QSDT-AC1-KIT-7PC DP801SDT-MD-JIC-28C HMD917
BRM-35A M1110MWS-808D 0904103HOUDK3100 0904102HOU

Subscribe

Subscribe to 332001 best prices tracker for your city/stores

Select area


Select Store


Product Versions:


Email: