Some info about 3386-01 2.5-Amp (SKIL)
- Features a 1-1/2-inch dust port that keeps work area clear of dust
- Motor is 1-speed for wood or metal based materials
- Rack and pinion table adjustment for quick angle and height adjustments
- Articulating LED work light for better view of work piece and cut-line
- Rip fence for straight, accurate cuts
- Enter your model number above to make sure this fits.
Warranty: standard manufacturer’s warranty
S&H: Free shipping if ordered online
Dimensions and weight: check our reviews
The SKIL 3386-02 120-volt 9-inch band saw features a 2. 5-Amp motor, a ribbed aluminum table with tilting modification ranging from 0 to 45, and a blade guide modification for custom depth settings. This versatile band saw is intelligently intended with an attached adaptable lamp for increased visibility and a mitre gauge. The table top is a full 11-13/16-inch square and the cutting depth is 3-1/8-inch with a throat depth of 9-inches. It comes with a adaptable work light, blade, parallel guide, miter gauge, and hex key.
This a good bandsaw and it’s for those doing wood hobby. Its real light, may be moved around to other places if need be. You may be able to clamp it down to a firm table or bench to take out the vibration. I bought mine from Lowes, however may have saved about 10. At Amazon.
I’m surprised at how much it wobbles when it’s on. It does what I need it to do. It is about what I projected for the price. I use lots of other Skil tools, like the miter saw and table saw, and I’m really happy with them. You must get to understand their restrictions, however for the price, they get the job done. I’m just a little disappointed with how much the band saw wobbles. I am sure after a little tweeking on it, I’ll be able to make it run a little smoother. I could still recommend it, considering the price.
I received this as a gift from my wife as she saw it on my wish list. I recently started restoring vintage straight razors as a hobby and needed a saw to aid in cutting stock for making new scales. My tablesaw is kind of overpowering to be cutting 3/16″ slices of horn or wood and my scroll saw just does not have the umph to get through some of the bigger pieces of horn or most of the hardwoods I work with. In spite of quite some negative reviews I have seen on Amazon for this saw it included a rip fence and a fitted light, both of which I wanted on a band saw. I have had pretty decent luck in the past with other Skil merchandise and not wanting a freestanding unit or to be spending big, this saw fit the bill. Box was intact with no dents or rips when I received it so kudos to Amazon & FedEx on the shipping. Set up on this saw was pretty easy, the only problem I encountered was the screw holes on the bottom of the table had some extra paint in them so the mounting bolts didn’t want to start. I chased the threads on the holes with a tap and had no more problems. Table mounts square to the blade and all the guides and everything else had the correct clearances & settings straight from the box. Played around with the saw this evening, and am happy with it, there’s minimal sound or vibration and it looks to have lots of power for my needs. I split some buffalo horn in to 3/16″ slices and blade went through the horn like butter. My next test was some slices of desert ironwood. Cut right through a 1 1/2″ x 6″ part of the ironwood with no problem, I could not be happier with it. I could say it is a good saw for the hobbyist or around the house fix jobs. I could recommend you take your time throughout the setup to check all the modifications that are in the instruction manual and be sure everything is adjusted and tight before you start using it. I like it, nice saw for the money.
DoALL 400S 10" x 16" StructurALL Horizontal Metal Cutting Swivel – 2 hp, 460V Full Cycle with Work Light
In machine shops, tool rooms, 3386-01 maintenance departments and low-volume production functionings, nothing beats a DoALL StructurALL horizontal band saw for long life, dependability and accuracy. The 400S will cut a large range of materials like tool steel, aluminum, wood, plastic and more. The 400S general function band saw is one of DoALL’s core machines in the StructurALL family of saws. Swiveling 45 degrees, it is the ideal machine for the small to medium fabricator or machine shop wanting to make very correct (straight or miter) cuts in smaller amounts. The 400S features a 10″ high x 16″ large capacity of rectangles and 10-3/4″ rounds at 0 degrees. This manual machine may be equipped with a range of alternatives to more ease operation, like pneumatic head-lift and pneumatic vise attachments. Standard equipment will include: swivel head to 45 degrees; recirculating coolant system, saw guides, spring-loaded carbide faced inserts; gear driven band brush, discharge tray American-made DoALL horizontal band saws were used daily for general function sawing a large range of materials as well as ferrous and non-ferrous metals, wood, plastic, glass, rubber, bubble and other low density materials.
JET J-3230 5-Inch by 8-Inch 1/2-Horsepower 115-Volt Single Phase Horizontal Wet
A great choice for professionals, the JET J-3230 horizontal bandsaw is intended to manage a range of jobs. This saw is ideally suited for tool rooms, maintenance, machine and fabrication shops. JET horizontal bandsaws are supported by an business leading 2 year warranty. And deliver performance and precision cut after cut.
Stout Tool STX-250C X- Cordless Kit for Professional Contractors
Stout Tool brings you the most revolutionary tool to hit the business since the cordless drill. Powerful and versatile it cuts virtually anything. The portability means taking the saw to the materials, not the other way around. Built with a High affect tolerant body and fast change blade release. With a Heavy-responsibility protecting case and Non-slip grip for extra durability. Super cobalt bi-metal blade means Completing projects faster, safer and easier. The X-Plosive power of this tool features a 21,000 rpm motor and Easy slide-in 18V battery. Kit will include: (2) 18v 2. 0 Ah NiCad Battery, (1) fast Charger, (1) X-Band Bi-metal Blade, (1) Heavy responsibility Molded Case. Industrial grade accessory line and substitute parts available, as well as The final Cutting Station, Batteries, Chargers and Blades.
Laguna Tools LT18 3000 Series
The LT18 3000 series is the new “Senior” member of our best selling 3000 series. Built with many features from our award winning HD line of bandsaws, the new LT 18 3000 series gives a perfect balance between big capacities and price. With 16″ of resaw capacity and a maximum blade width of 1″ it’s powered by a 4HP TEFC motor and will handle nearly every job a common custom woodworking shop will meet. Some of the features of the LT 18 3000 series are blade tension system with fast release, foot brake with micro-switch for convenience and safety, 2 dust ports, and a distinctive rack and pinion tilt system to tilt the table which is counter balanced with a gas spring, our award winning Laguna Guides are standard equipment and are adjusted by a rack and pinion guidepost. Motor: 4 HP TEFC 220 volt Single phase Diameter Dust Port: 2 X 4″ Throat: 17. 5″ Cast-iron Table Size: 20″ x 20″ Miter Slot: 2 T-slots Table Height: 36″ Foot Brake w/Micro Switch: Yes Flywheel Diameter: 18″ Resaw Capacity: 15. 25″ Minimum Blade Width: 1/16″ (with optional Cool Blocks) Maximum Blade Width: 1. 25″ Mobility Kit choice: Yes Guides: Laguna Guides Blade Length: 146″ Height: 75″ Upper Guide Post: Rack and Pinion Weight: 525 lbs.
Rikon 10-305 With Fence, 10-Inch
Get all of the features of a full size bandsaw in this bench top model. The big cast iron table, edge facing thrust bearings, a powerful 1/3 HP induction motor, and 4-5/8 in cutting capacity are all of the features you come to expect as standard from Rikon. Add the optional stand for the functionality of a floor model. Specifications: 1/3 HP, 3. 5 amp motor, speed 2780 ft/min, safety paddle switch. Cutting capacities: Height 4-5/8 €, Width 9-5/8 € . Table is 13-3/4″ x 12-1/2″. Edge facing thrust bearings. 70-1/2″ blade vary from 1/8″ to 1/2″.
Baileigh BS-127P Manual Portable Metal Cutting with Trigger Handle, 110V
Baileigh movable metal cutting band saw from Baileigh Industrial is a high quality movable band saw that will give any shop years of profitability. The movable metal cutting band saw is 110 Volts so it can work in any setting and it is driven by an inverter that lets the operator to change the blade speed from 75 to 246 feet per minute, to accomplish the best cut possible, also as increase blade life. 110 Volts movable metal cutting band saw. 5-inches round capacity. This 5-inches round capacity band saw will also miter to 60 degrees right via the swivel head of the saw instead of the vise. This will make for more correct cuts and does not agreement the holding power of the vise. Adjustable blade guides, trigger handle and stop rod are included in this great package. Manual return, Swivel Head miter modification, 0 – 60 degree miter angle, Capacity rectangular 90 degree by 45 degree: 5-6/16-inches by 5-inches / 3-inches by 6-3/4-inches / 1-21/32-inches by 2-29/32-inches. Capacity round 90 degree by 45 degree: 5-inches / 3-inches / 1-21/32-inches, Capacity square 90 degree by 45 degree: 5-inches / 3-inches / 1-21/32-inches, Blade measures: 56-11/16-inches length by 1/32-inches width by 1/2-inches height. 75 – 246 fpm variable blade speed. Gear drive. 110 Volts power.
2 Urethane replacement TIRES Fits DELTA 28-206 14" Made in USA 0.095" Thick
These tires will be running on your band saw long after rubber ones have literally turned to dust. They don’t dry out, so, they’ll not crack, peel or harden like rubber tires do. They hold so tightly to the wheel you will not have to glue them down. Colored bright orange for easier inspection. Make sure to follow label information for best performance & easy installation. Tires come in pairs. Made in USA.
DoALL 500DS 14" x 20" StructurALL Horizontal Metal Cutting Dual Swivel – 5hp, 460V with Work Light
The cheap DoALL 500 Series miter cutting saws increase flexibility and improve efficiency in any general function sawing application. The DoALL 500DS cut rounds up to 14″ in diameter, rectangles to 14″ x 20″, and the saw head spins manually for miter cuts in both directions. Caused by the cutting capacity with a 1-1/4″ band saw blade and a 5-HP AC inverter drive motor with endlessly variable band speeds from 50-400 fpm, you have the ideal saws for fabricating shops, maintenance buildings, tool rooms and manufacturing plants of all sizes. Standard equipment will include: variable vise pressure control; saw guides; gear driven band brush; control console; full stroke hydraulic vises; chip collection bin American-made DoALL horizontal structural saws were used daily for general function sawing a large range of materials as well as ferrous and non-ferrous metals, wood, plastic, glass, rubber, bubble and other low density materials.
DEWALT DCS374P2 20V Max Deep Cut Kit
The DEWALT DCS374P2 20v Max XR Deep Cut Band Saw Kit features a 5” x 4-3/4” cut capacity to cut strut, pipe, angle iron, pipe and different other materials. Cuts up to 4″ SCH 40 pipe and double strut. This band saw has an LED Work Light with a 20 second delay that illuminates black work surfaces for correct cutting, and offers variable speed trigger and dial let for versatility and control. The DEWALT Deep Cut Band Saw is able of up to 149 cuts of 1-5/8″ Strut with 14 TPI blade. There’s an integrated hang hook which lets user to hang the saw without damaging the front handle or base, and the tool-less blade changing lever loosens blade tension for easy blade changes. Will include: (1) DCS374 20V MAX Band Saw, (2) DCB205 20V MAX 5. 0Ah batteries, (1) Charger, (1) Kit Box, (1) 18TPI Band Saw Blade.
JET JWBS-20QT-3 20-Inch 3HP 1Ph 230-Volt Wood with Quick Tensioning lever
708754B Bandshaw Size: 20″ Features: -Triangular design frame gives superior column rigidity. -121/4”” re-saw capacity for cutting big pieces of wood, slicing veneers and cutting book paired panels. -19”” x 19”” precision ground cast iron table for extra stability and work support. -Precision computer balanced wheels eliminate vibration for correct blade tracking. -fast release blade tensioning with two settings for final convenient. -One setting to release cutting tension and a second release setting for blade change. -Upper and lower ball bearing, micro adjustable blade guides for correct support throughout the cut of different size boards. -Tool less, independently adjustable ball bearing guide system for fast and easy modifications and smooth operation. -8spoke band wheels computer balanced to turn true without vibration. -Rigid, heavy-responsibility guide post with rack and pinion modification for extra blade support. -All cast iron hand wheels make smooth, easy blade modifications with less effort. -Exclusive fast release, precision T-square style rip fence with re-saw post. -Blade speed: 3000 SFPM. -Table Dimension (LxW): 19 x 19””. -Table tilt: 10 left, 45 right. -Table height From Floor: 37. 5””. -Dust Port Outer diameter: 4””. -Stand Type: Closed. -Band saw size: 18””. -Wheel diameter: 18. 5””. -Motor current: 13 A. Plans: -Motor voltage: 230 V. -Prewired voltage: 230 V. Dimensions: -Cutting capacity Width: 18. 63””. -Cutting capacity height: 12. 25””. -Minimum saw blade width:. 13””. -Maximum saw blade width: 1. 5””. -Blade Length: 137””. -Dimensions: 71”” H x 22”” W x 33”” D. Collection: -4”” dust port lets for direct connection of dust collection system. -Dust Collection Minimum CFM: 400 cu. Ft/min.
Grizzly G0613 Swivel Metal-Cutting, 7 x 8-1/4-Inch
This saw is built for accuracy and production. Easy angle set-ups between 0 and 60 degrees means no wasted time between cuts. Lever controlled blade guide locks let modifications right up to the work part for optimum support and the blade guides have completely adjustable ball bearings so you know you are going to get straight cuts. And when you are done use the fast release lever and stock length stop to get on with the next cut. It is fast and easy to use. Features: Swivel base with degree scale Centralized control panel Heavy-responsibility all steel one part base Adjustable hydraulic down feed Extra deep throat vise with lever lock fast release vise 0-Degree to 60-Degree swivel Tooth selection map fitted coolant system auto shut off Adjustable blade guide system Blade wheels have heavy-responsibility ball bearings plans: Motor 1 HP 110V/220V single-phase 3450 RPM Amps 15. 4/7. 7 Pump motor 1/8 HP 220V single-phase 3450 RPM Drive Sealed worm gear Blade size 82″ x 3/4″ Blade speed 314 FPM Miter cutting capacity 0-Degree to 60-Degree Cutting capacities: 0-Degree round 7″ 0-Degree rectangular 7″ x 8-1/4″ 45-Degree round 41/4″ 45-Degree rectangular 4″ x 4-1/4″ +60-Degree round 2″ +60-Degree rectangular 2-3/4″ x 2″ Floor to table height 35-5/8″ in general dimensions 63″L x 29-3/4″W x 42-7/8″H. Estimated shipping weight 511-Pound.
Dake SE-712 Model Standard Duty Horizontal, 120V, 1 Phase, 63-1/2" Height x 21" Width x 56" Length
The Dake SE-712 3/4-hp horizontal floor-standing band saw has four blade speeds, a hydraulic control system, a coolant pump system, and a range of safety controls for medium-responsibility cutting applications. The floor-standing model has a heavy steel base and a vibration-tolerant table bed for correct cutting. The saw offers blade speeds of 85, 130, 180, and 235 feet per minute (fpm) for cutting stainless steel, tool steel, some carbon and nickel-chromium-molybdenum alloy steels, some copper alloys, bronze, and hard brass. The band saw has a hydraulic control system for feeding stock at variable rates and may be locked at any height. The coolant pump system cleans and cools the workpiece and blade for cutting at high speeds or on hard materials. The band saw has low voltage reset, thermo overload protection, blade guards, safety interlocks, and an auto shut-off system for safety.
- Vermont American 31152 3/8-Inch by 18TPI by 59-1/2-Inch Metal Band Saw Blade
- SKIL 80151 59-1/2-Inch Band Saw Blade Assortment, 3-Pack
- SKIL 3320-01 120-Volt 10-Inch Drill Press
- WEN 3920 16-inch Variable Speed Scroll Saw With Flexible LED Light
- Bosch BS5912-18M 59-1/2-Inch by 3/8-Inch by 18TPI Multi-construction Bandsaw Blade
- WEN 6502 4 x 36-Inch Belt with 6-Inch Disc Sander
Models to consider:
|JWBS-14SF-3 SB1017||1791216K 6238N||W1715 BPB180|
|DCS374B AS-350M||400S 230V W1 SR5U||ABG7X12 J-3410-2|
|Trajan 360A 500S 230V W1||Trajan 916SV PM18003||400M 230V F2W1 500DS 230V W1|
|JWBS-14DXPR G0514X||400S 208V W1 W1729||C-40 CR TT-BS03|
|400M 460V F2W1 TS-1040P-50||DCS374P2 500S 460V W1||G0513X2B mband14bx110-175|
|B14X1X0.095PUOX2 Bs-712N||G0457 BS5205||JWBS-20QT-3 W1706|
|HBS-56S 500DS 208V W1||DCS371P1 J-9225||DTB5000 TS-1044H|
|XBP01Z DCS370K||414504K 400S 460V W1||BSV-16 BSV-12|
|G0621X BSV-20VS||VBS-18MW G0513X2||400M 230V W1 TS-1040E-50|
|Trajan 360A 414504C||BS-128M 414504K||BSH180BL-RT DCS370B|
|G0513ANV BS-712M||155790K ZRBS904G||BS904G MBAND144200|
|2200A TS-1040P-30||G0514X2 G0513||G0622 2701Q032|
|AS-350M J7020M||HBS-916W BPB180||G0457 G0621X|
|DCS371P1 RK7453||JWBS-14SF-3 B14X1X0.095PUOX2||DCS370K 6238N|
|HBS-56S W1770||3386-01-RT BSV-20VS||Bs-712N BS900|
|mband14bx220-250 JWBS-20QT-3||2107FZK 400S 230V F2W1||XBP01 PM1500|
|DCS371B G0513X2B||J-8201K Trajan 150||400M 460V W1 BSV-16|
|FS64C BS-127P||500S 460V W1 500S 208V W1||G0513X2BF G0613|
|mband14bx220-250 J-3410-2||155790K FS64C||TS-1040E-50 G0555LANV|
|DCS370K HSB-1018W||XBP01 Trajan 150||DCS374P2 JWBS-20QT-3|
|400M 208V F2W1 ZRBS904G||ABG7X12 BS-712R||G0621X 400M 460V F2W1|
|G0513 500S 230V W1||414504K MBAND1412-175||BS904G mband14bx110-175|
|J-3230 DCS371M1||SB1017 B14X1X0.095PUOX2||MBAND144200 G0514X|
|BSH180BL-RT 500DS 460V W1||J-7015 Trajan 916SV||Trajan 360A BS-350SA|
|500S 208V W1 BS-128M||C-40 BS-210M||PM1500 JWBS-18QT|
|400M 460V W1 BSV-16||Trajan 270 D28770||400S 460V W1 G0513X2B|
|1791216K M1113||414504C JWBS-18QT-3||TT-BS03 J7020M|