6502 4 (WEN) actually has good reviews
- Belt tilts anywhere from 0 to 90 degrees
- Enter your model number above to make sure this fits.
- 4.3 Amp motor provides up to 3600 RPM
- Sturdy cast iron base prevents any heavy vibrations
- Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
- Tension release lever provides for simple changes to sandpaper grit
Warranty: standard manufacturer’s warranty
S&H: Free shipping if ordered online
Dimensions and weight: check our reviews
Remember when you needed a versatile and dependable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4. 3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a big load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you will have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your specific workpiece while the heavy cast-iron base prevents vibrations. With all of this also to the 6-inch side disc, you will have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a tough cast-aluminum work table. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2. 25 inch dust port to connect a dust extractor. And because this is a WEN Product, your buy comes supported by a two-year warranty, a nationwide network of experienced experienced technicians, and a useful buyer service line all to be sure that you remember WEN.
Hard product for DIY garage user. I replaced the 6″ disc already and found that whatever sticky was used on the factory one was terrible to clean off to prepare the surface for a substitute disc. The machine is the same as the Ryobi Bench Sander Green BD4601G one at Home Depot, however with WEN labeling. One big disappointment I had was the belt guard on top about how small and restricted it was in comparison to the Ryobi model’s guard. After I watched my son nearly stick his finger in the the danger spot where the belt meets the machine, I quickly looked up the model number for the Ryobi guard and bought it to replace the junky WEN guard. For 12, I was able to replace it with this one: WORK REST RYOBI – RIDGID BD46054. It fits perfect since the machines are same. Money well spent. I do wonder, but, if I could’ve saved myself the headache and just bought the Ryobi one from Home Depot. I recommend any WEN engineers think about the safety upgrade.
The maker commented on this review(what is this?).
The belt sander came well filled, icluded all parts and was easy to setup. The table is amazingly tough but the miter gauge is loose in his track. I guess its more an rattling sound issue which is easily solved be removing the gauge when not used. But also pay attention if you have to work exact. While I left the disk as it came with a 80 grit I changed the belt now to an 150 grit belt. Changing and adjusting the belt is easy and done in seconds. So far it did not bog under normal workload. I’m still on my 1st belt/disk so I can not really say something about long-term use but now I’m confident the sander will last. As earlier mentioned the stopper/guide is much better intended with the Ryobi variant but I can live with it now. So I’m happy with this sander and could totally recommed it to a friend.
DBI/Sala Talon, 3101001 Self Retracting Lifeline, 8′, 1 Nylon Web, Swivel Snap Hook And Quick Connector For Harness Mounting, Blue/Yellow
8-feet of 1-inch nylon web 6502 with swivel snap hook and fast connector for harness mounting. 310 pound weight capacity. Every day workers put up with mini blocks, fall limiters and retractable lanyards on occasion called seat belt retractors. These substandard merchandise use technology worked on by car businesses for restraint, which was never meant to be used for fall capture. The talon self retracting lifeline is built from the ground up using the new in self retracting lifeline technology. Talon has many evident features like its compact size, light weight, integral anchorage connector that attaches the SRL straight to the user’s harness and an audible display. Talon’s all metal braking system features an anti-ratcheting dual pawl design, with pawls functioning independently for extra security. And because it operates on velocity not acceleration, your workers can maintain a normal work rate and not be interrupted with constant lock ups. Talon self retracting lifelines are engineered for dependable protection that locks when it should; will not lock when it should not. The very lightweight design, just under three pounds, and fast connect system gives you freedom of motion without compromising safety. Caused by the small size and light weight, talon may be connected directly behind a harness for extra mobility. About Capital Safety, the world’s leading designer and maker of height safety and fall protection equipment with 20 operating sites global, is home of the DBI-SALA and PROTECTA brands. All of Capital Safety’s fall protection and rescue systems are supported by broad training, knowledgeable technical help and professional buyer service.
Edge Eyewear TSDK216 Khor Polarized Smoke Lens Safety Eyewear Glasses, Black
Edge Eyewear specializes in safety/sunglasses made for use in construction, sports and active lifestyle industries. Exactly in the market to sell fashionable safety glasses that offer technology which here-to-fore never been offered in protecting eyewear. The frames are engineered to offer exceptional comfort and other useful features, and the lenses have distinctive light management properties. As a need of manufacturing safety eyewear they’re obliged to pass the safety testing standards outlined by ANSI (American National Standards Institute Inc. ) for construction of the glasses by materials used also as affect and other testing which tests the quality of engineering and assembly.
Protecta Rebel, AD120AR 1-Inch Web Self Retracting Lifeline, Lifeline Hook, Housing Swivel And Carabiner, 20-Feet, Red/Black
Rebel 20-Feet swivel web self retracting lifeline with 9503319 steel snap hook end and 2000115 housing carabineer. With a 20-Feet length and competitive pricing, employers can inexpensively replace simple lanyards with the versatility and added safety of a self retracting lifeline. The retractable technology deployed in the Rebel SRL’s assures falls are stopped inside some-Inches, making Rebel SRL’s safer than conventional lanyards. The Rebel incorporates a rugged aluminum housing and stainless steel working parts that can withstand rough use. The distinctive thin webbing enables a compact size that’s easy to use. With a smooth case and rounded corners, the Rebel gives added comfort and ease-of use. It increases worker productivity and decreases worker exhaustion for final worker satisfaction. A distinctive speed sensing brake keeps forces to a minimum and decreases clearance prerequisites. With a maximum arresting force of 900-Pounds, it supports a capacity of 310-Pounds. About Capital Safety, the world’s leading designer and maker of height safety and fall protection equipment with 20 operating sites global, is home of the DBI-SALA and PROTECTA brands. All of Capital Safety’s fall protection and rescue systems are supported by broad training, knowledgeable technical help and professional buyer service.
GearWrench 85051 3/8-Inch Drive Micrometer Torque Wrench 25-250 in lb
GearWrench 3/8″ Drive Micrometer Torque Wrench – 25-250 In/Lbs 25-250 in/lbs. +/- 3 accuracy. Sealed pear head design – keeps out contaminents for superior performance and life and lets better access and strength in comparison to round head styles. Turn locking band lets easy setting of wanted torque and prevents accidental change of torque setting while in use. One finger operated reversing lever for better productivity. Elastomer handle grip for comfort and oil resistance. Will include blow molded case.
Honeywell TH6320R100 Wireless FocusPro Thermostat
FeaturesPowered by RedLINK dependability No interference with other wireless devices in the home Works with well-matched RedLINK enabled devices Same great features of the FocusPRO#171; thermostat now wireless Installs in minutes Can display outdoor temperature and humidity 1 year battery life 2 month low battery warning.
5220NI Crescent View 3LT Vanity Fiture, Brushed Nickel Finish Satin Etched Cased Opal Glass
Kichler Lighting 45220NI Crescent View 3LT Vanity Fixture is part of a distinctive collection that’s both an exquisite modern form and an unparalleled working work of art. The simple straight lines with a sleek Brushed Nickel finish and bold geometric shapes are contrasted by the softly curved Satin Etched Cased Opal glass for a part that will improve any d cor with simple elegance. The 45220NI is 24IN large x 6. 25IN high x 5. 75IN extension from the wall. The backplate is 9IN x 4. 75IN, and the HCWO (height from the center of the wall outlet) is 3IN. The 45220NI comes one per package, and requires three (3) 60W candelabra base incandescent lamps (not included), dimmable using a regular incandescent dimmer. Since 1938, Kichler Lighting has offered a distinctive array of lighting solutions that reflect your individual personality, tastes and plans. Kichler brings you an unparalleled range of thrilling style families, distinctive finishes, new colors and unequaled quality. If it is informal, modern, transitional or conventional, you will find it with Kichler, lighting that defines your style.
Fantech PB370-2 Uses 6 Duct 370 CFM Dual Grille Bath Fan
As The Trend To bigger Spa-Like Bathrooms Continues To get In Popularity, The Need For correct Ventilation Becomes More Important Gone Are The Days Of A Single Bath Fan In The Center Of The Room. The Key To correct Ventilation In Oversized Baths Filled With lavish Amenities Is True Spot Ventilation At The Source fast elimination Of Moisture At The Source Will Keep Your Beautiful Bath Free Of Mold And The Effects Of Extreme Moisture Fantech Has worked on Its Premium Bath Fans So That One Remote Mounted Fan Motor Can Effectively Ventilate some number of regions Of The Bath roof Grilles Or roof Grilles With Lights may be Easily located Over Showers, Whirlpool Tubs, Steam Showers, Toilet And Vanity PB370-2 High Performance Premium Bath Fan with Dual Grilles 370 CFM Metal Fan, Two roof Grilles, Two grill Housings with Dampers and Y Adapter (6x6x6). Uses 6″ channel during. Grill Housing Fits Between 2×8 Construction. Energy Star Qualified Feature and Specification Improved Airtight Design Longer fast-Connect channel band Hanger Bars Extend to 24″ OC Set Screw Locks Hanger Bars in Position Key Hole Mounting Slots UL ” Wet place” ranking IC ” Insulation Contact” ranking External Rotor Motor by ebm-papst Superior CFM at Higher Static Pressure 100% Speed Controllable Rated for uninterrupted responsibility CFM at 0. 2 Static Pressure: 370, CFM at 0. 4 Static Pressure: 317 channel Size: 6″ Watts at 0. 2 Static Pressure: 120 CFM/Watts at 0. 2 Static Pressure: 3. 1.
HP 230V 2-Speed Waterway Spa Pump Side harge 2 1/22 Eecutive 56 PF-0-2N22C, 3721621-13
Will include (1) 2″ Discharge Union & (1) 2. 5″ Inlet Union. READ: there’s no business standard for Unions. The different brands have their own distinctive style, which means you have to use the unions provided with our spa pump. This will most probably involve cutting off your old unions and installing the new ones shipped with the spa pump. If your heater is directly coupled to the spa wet end, then our pump will most likely not work as the union will most probably be different. Make sure to look at the motor voltage, not the voltage supplied to the spa to find out the correct pump voltage. When removing power cord from present pump we suggest you mark your wires for “common”, “quick”, “low speed”. The pump doesn’t come with a power cord. The connection chart for the new pump is on the motor name plate. The wet ends may be rotated by just loosening the motor thru bolts and turning the pump head, allowing the discharge to point to 3 O’clock, 9 O’clock or 6 O’clock. Not Self Priming – Water must be above pump head to operate properly. 2″ mentions the size of your PVC plumbing supply lines. It has nothing to do with the size of the union nuts, the size of the threads on the wet end or the inside diamater of the inlet/outlet. The PVC pipe slides into the union and is glued with PVC cement. 2″ plumbing means you have 2″ schedule 40 PVC supply lines (2″ I. D. ; 2 3/8″ OD on the line) circumference = 8″ (wrap a tape measure around the pipe). If you’re unsure if this pump will work for you, call us, we may help help you in your selection. If you only require a one speed pump, this pump will work good. Simply just use the quick connection. 2″ outlet measures 3″ O. D. On the threads, 2. 5″ inlet measures 3 5/8″ O. D. On the threads/.
KOHLER K-925-CP 2.5 GPM Moie Showerhead and Wireless Speaker, Polished Chrome
K-9245-CP Finish: Polished Chrome Features: -Single-function showerhead. -Sprayface features 60 angled nozzles. -2. 5 gpm spray. -Silicone sprayface makes it simple to clean away mineral increase. -Sync your device enabled with Bluetooth technology with the wireless speaker from up to 32 feet away. -Speaker plays wirelessly in or out of the shower, use it in the kitchen or take it to the beach. -Docking securely into place, the magnetic speaker pops in and out of the showerhead for easy recharging. -fitted lithium-ion battery gives 7 hours of uninterrupted play. -1/2″-14 NPT connection. Will include: -USB cable is included (39”). Dimensions: -in general dimensions: 5” W x 4-3/16” D.
6672 Lenno Healthy Climate 16255 Merv 16 Filter
Intended to work with your heating and cooling systems, it cleans the air during the home, capturing up to 95 of good particles-allergy-aggravating irritants that are easily inhaled deep into the lungs. Highest-efficiency media filter (MERV 16/CADR 1900) The filter removes a minimum of 95 of circulated dust and other particles from 0. 3 micron and up The filter removes a minimum of 95 of mold spores and other bioaerosols from0. 3 micron and up.
Lincoln Electric Viking Heavy Metal 250 Series Auto Darkening Welding Helmet K3029-2
The Ideal Choice For The Journeyman Fabricator The VIKING 2450, the new evolution in our greatly successful mid-priced auto-darkening helmet line, gives the best optical clearness available in a welding helmet today. The 2450 Series offers an improved headgear for greater comfort and flexibility. Perfect 1/1/1/1 optical clearness ranking (EN379) Fastest switching speed in its class Up to 28% bigger looking at area versus competitive helmets intended for long hours of comfy wear with the new pivot style headgear substitute Lens Standard or DINs Standard 4 x 5 Black or Graphic Black Cartridge Size 4. 5in. X 5. 25in (114mm x 133mm) View Window Size 3. 82in x 2. 44in (97mm x 62mm) Number of Sensors 4 Shade Control interior Variable Welding Shades DIN 6 to 13 with Grind Sensitivity Control Variable Shade, Delay, and Light Sensitivity Powered Replaceable lithium battery Light to black Switching Time 0. 00004 sec. (1/25000 sec. ) Delay Control (black to Light) 0. 1 sec. Min. – 1. 0 sec. Max TIG ranking 5 amps Compliance ANSI Z87. 1-2003/CSA Z94. 3 Operating Temperature 14 – 131 deg. F (-10-55 deg. C) Storage Temperature -4 – 158 deg. F (-20-70 deg. C) Weight 20. 0 oz. (567 g).
Waste King 9900TC Legend Series 3/ HP Batch Feed Operation Garbage Disposer
The Waste King 9900-TC Legend Series 3/4-HP EZ-Mount Batch-Feed Garbage Disposer is one of the best food disposers on the market. With a high-speed 2700 r. P. M. Permanent magnet motor, this disposer can proficiently get rid of your food waste. This disposer is septic safe for properly sized septic tanks, making it environmentally friendly. The fast and easy mount system gives a no-annoyance installation and it’s dishwasher well-matched. Package Content:garbage disposerpower cordmanualwarrantyStainless steel and Celcon sink flange3 position stopper/actuator and ABS waste elbowStainless steel grind ring, cast stainless steel swivel impellers and stainless steel turntablePermanently lubricated, sleeve-type bearingsManual reset overload protectorHeight 16. 63Width 8. 63Depth 10. 25Weight 13. 00ColorOperating SystemBatteries IncludedBatteries RequiredNumber of Batteries 0Battery Type No batteries requiredLanguage EnglishAssembly obliged.
- Woodstock D1309 6-Inch Diameter PSA 100 Grit Aluminum Oxide Sanding Disc, 3-Pack
- Sungold Abrasives 35072 4-Inch by 36-Inch 320 Grit Sanding Belts Premium Industrial X-Weight Silicon Carbide, 3-Pack
- POWERTEC 110683 4-Inch x 36-Inch 80 Grit Aluminum Oxide Sanding Belt, 3-Pack
- POWERTEC 110680 4-Inch x 36-Inch 80 Grit Aluminum Oxide Sanding Belt, 10-Pack
- WEN 4208 8-Inch 5 Speed Drill Press
Models to consider: