CLPK224-181 18-volt (Bosch) has great reviews
Warranty: standard manufacturer’s warranty
S&H: Free shipping if ordered online
Dimensions and weight: check our reviews
Official Bosch CLPK224-181 Site
The new Bosch CLPK224-181 18-Volt combo kit will include two of the industries most groundbreaking power tools with HDH181X Brute Tough Hammer Drill/Driver and IDH182 Socket prepared affect Driver. Decrease the risk of injury from kickback or adhere-up situations with Bosch Active answer Technology shown in the new the Bosch HDH181X 18-Volt Brute-Tough 1/2-Inch Lithium-ion Hammer Drill/Driver. The groundbreaking on-board acceleration sensors automatically shut the tool down when a possibly dangerous torque reaction occurs. The Bosch engineered 4-pole motor gives 752 in/lbs of torque, making it powerful and economical for drilling a broad range of high torque bits like spades and augers. As with all Bosch Best Built Cordless tools, advanced electronic motor and cell protection help prevent overheating and overloading for expanded tool life and runtime. A fitted LED light illuminates the workspace for best visibility. All-metal Bosch gears and Durashield Tool Housing hold up in the toughest jobsite conditions. The kit also will include the IDH182 Socket prepared affect Driver featuring the socket prepared all-in-one tool holder, which combines a 1/4-Inch hex and 1/2-Inch drive into one for final versatility to finish a wider range of applications. The socket prepared all-in-one tool holder removes the need for users to own an affect driver and affect wrench and also removes the need for fragile socket adapters. The IDH182 integrates the Bosch Performance Control System, which lets users to change tool speed and torque with a push of a button to go with the tool’s performance to the application at hand. Equipped with Bosch’s EC brushless motor, this tool gives 2X the motor life, increased performance and improved runtime. The CLPK224-181 18-Volt combo kit will include (1) HDH181X 18-Volt Brute Tough 1/2-Inch Hammer Drill/Driver, (1) IDH182 18-Volt Brushless Socket prepared affect Driver, (2) 18-Volt 4. 0Ah Batteries, (1) Charger and (1) freelancer Bag.
I work usually on utility lines/poles outdoors on a weekly base doing maintenance for an organization. I use various cordless tools but usually i need a good drill and affect driver which i abuse from an aerial can and on the ground in a range of ways. I had been working with Hitachi’s set earlier and Panasonic before that – both great tools. They are more than one notch above. The tools are powerful, hold their charge, are intended well, and made tuff. There are little design features that really come in useful – the belt clip for example – when you are climbing a 28′ ladder on a tree or with wire rungs the fact that this little monster of an affect just clips right on my belt is great to say the least. And while many drills come with some sort of attached light (as did my hitachis) the leds on they are monsters – don’t need my helmet light anymore. Battery meter that tells you the level on the tool is great so you do not get stuck oin the air with a dead tool, and fast charging. Just some of the little perks here. Two small but important points: The “socket prepared” bit on the end of the affect drill is a nice idea and i do hope they work a bit more on it to perfect it – it means i can just slip and 1/2″ socket right on the bit without an adapter because they made this nice square head – but it does not seem to hold the sockets on so well – they don’t click on and stay like they should. (bear in mind, all this does is make it like any regular affect driver requiring the use of an adapter). 2nd and more important: If you’re planning on using a screw guide, as i do (I’m driving deck screws all day with this thing), beware that for some reason the bosch brand screw guide doesn’t snap in the bit holder.
The power these have over their predecessors is unbelievable. Three torque/speed settings on the affect work very well, LED’s are well placed and may be shut off if not needed. Ratchet chuck on hammer drill stays tight, and stops if put in a adhere situation so as not to break your wrist. I am happy as a professional builder to have tools that can keep up with me.
Great mix. Lights are well-placed, battery indicators useful. The hex adaptor hole on the affect driver is somewhat deeper than standard hex accessories, so not all of them will seat totally.
Factory Reconditioned Ryobi ZRP887 One+ 5-Piece out Batteries
Seldom has a complete cordless CLPK224-181 tool kit been so cheap This do-it-yourself RYOBI combo is chock-full of 18 volt lithium-ion devices that will turn chores into hobbies. The variable-speed reciprocating saw in this bundle will include a blade with a 7/8 in. Stroke length able of 100 SPM. For high-torque fastening jobs, turn to the affect driver for spinning lag bolts, screws and lug nuts. A multipurpose carbide blade comes with the 5-1/2 in. Round saw, able of carving through material at speeds up to 4700 RPM (no-load). A keyless chuck secures 1/2 in. Bits into the lightweight drill, a variable-speed device that lets the operator to choose one of 24 clutch settings for best torque. Cut, scrape and sand hard-to-reach spaces with the JobPlus Base and multi-tool adapter. Drill/driver features 24-position clutch and 2-speed gear box to go with your drilling and driving needs Drill/driver will include 1/2 in. Heavy-responsibility, single-sleeve, keyless chuck with spindle locks for fast and easy bit changes MagTray magnetic holder on drill/driver offers convenient placement for screws and bits GripZone overmold on drill/driver gives optimum grip and user comfort Reciprocating saw features tool-less blade clamp for fast and easy blade changes Reciprocating saw is ergonomically intended for better balance Reciprocating saw features variable speed for cutting all material types Compact design of round saw assures best handling round saw front pommel handle for 2-handed operation round saw has ExactLine laser that automatically activates throughout use for improved cutting accuracy round saw has a spindle lock and on-board wrench storage for convenience throughout blade changes JobPlus base with Multi-Tool attachment has a compact tool head to fit into tight spaces many positions head on JobPlus lets for handling versatility BATTERIES AND CHARGER NOT INCLUDED.
Factory-Reconditioned CLPK-181-RT 18V 4.0 Ah Cordless Brute Tough Drill Hex Driver
This is a factory reconditioned product. Reconditioned usually means that the product was returned to the maker, who brings the product back to like new condition. Some merchandise may contain cosmetic blemishes. Will include 18V Cordless Lithium-Ion 1/2 in. Brute Tough Hammer Drill with Active answer Technology – HDH181X-RT, 18V Cordless Lithium-Ion 1/4 in. Hex affect Driver – 25618-RT, (2) 18V 4. 0 Ah FatPack Batteries – BAT621, 18V Battery Charger, Carrying Bag.
Factory-Reconditioned Ridgid ZRR9600 X4 Hyper 18V Cordless 1/ in. Drill Driver Driver
The new Ridgid 18-Volt Drill and affect Driver Combo is a must have combo kit at an unbelievable price. The 18-Volt Compact Drill and affect Driver has best-in-class torque for the most calling for applications. Both tools have exclusive Grip Light Technology which engages LED light by just holding the tool and groundbreaking Hex Grip for maximum comfort to make every job easier. Powered by Hyper Lithium Technology, an groundbreaking battery technology built for high performance. Compact drill 4 pole open frame motor delivers 535 in. Lbs of torque in a more compact size affect Driver comes with high torque output which delivers 1,750 in. Lbs of torque for the most calling for applications Grip light technology engages light by just holding the tool Removable Belt hook for either side of the tool to keep drill or driver in direct reach This item is sold with (2) R840085 Batteries and (1) R840093 Charger Or R86091 Charger Pictured MFG Model # : ZRR9600 Included in this Listing: R86034B 18-Volt X4 affect Driver R86008 18-Volt X4 Compact Cordless Drill With Handle 2) R840085 Hyper Lithium Ion 1. 5 Ah Compact Battery Packs R86091 Dual Chemistry Storage Charger 902691002 freelancer Bag Operators manual.
DEWALT DCK81D 0V Max XR Lithium Ion Brushless Compact Drill/Driver & Driver vs CLPK-224-181
This Dewalt(R) 20-Volt Drill/affect Combo Kit has a brushless motor that delivers up To 57 more run time than brushed. It has XR Li-ion batteries with fuel gauge, which gives 33 more capacity over standard packs. Both of these tools feature LED lights with a 20-second trigger release delay, increased visibility in black or confined spaces. This kit also will include a DCD790 20v Max; 1/2″ Drill/driver, a DCF886 20v Max affect Driver, a DCB112 12v/20v battery charger, and 2 2. 0Ah batteries to ensure you have the complete package to meet your needs.
Milwaukee 090-9 V18 Lithium Ion 4-Pack
A great professional cordless tool kit. 18 volt Lithium-Ion has the best power-to-weight percentage of any cordless tool and now Milwaukee durability is available in 18 volts and is backed up by a 5-year warranty, the best in the business. My favorite part about Milwaukee Lithium-Ion cordless tools is the “fuel gauge. ” The “fuel gauge,” as theyre calling it, indicates how much battery power is left in the battery, also as when you have to recharge it. Lithium-Ion batteries don’t dissipate their charge like their NiCad cousins. A completely charged, unused NiCad battery will dissipate 20 in 24 hours, where as a Lithium-Ion will only dissipate 1 % to 2 % in the same time period. Also, a Lithium-Ion battery will give the tool optimum 18-volt power, till recharge time, when the power output will observably drop off. A new NiCad battery will only supply 18-volt power at the beginning and will “fade” in power steadily till recharge time. Do yourself a favor and go Lithium. Recip Saw This recip saw, also called “sawzall,” after the 1st one worked on many years ago by Milwaukee, has a two-finger trigger and anti-slip rubber grips over the front housing and the handle. This powerful tool has variable speeds, trigger lock-on and an adjustable shoe to extend blade life. This recip saw cuts fast (2,700 strokes per minute) and has a 1-1/8-inch stroke length. Vibration is low, which makes it more comfy to use. This 18-volt sawzall has an overload protection clutch to protect the tool throughout heavy-responsibility use and a tool-less blade clamp for ease in changing blades. It has a tool-free adjustable shoe to extend blade life and depth-of-cut-control. The balance is a bit off, however when demo-ing with a recip saw, balance is last on your mind. Its light enough not to produce extra exhaustion caused by a front-heavy design. The handle doesnt have enough room, when using the bulkier kind of work gloves. If you use a tight-fitting glove, you may want to have plentiful room to work comfortably. Round SawThis powerful and fast 6-½-inch cordless saw has a responsive blade brake and a 50 degree bevel. The blade guard has a lower lip to catch on the front edge of lumber throughout bevel cuts, so it retracts as the cut progresses, instead of to get caught and stalling the cut. Hammer Drill This powerful hammer drill boasts 450 in. /lbs. Of torque and has a ½-inch chuck with ratcheting carbide jaws to securely clamp the bit when drilling and driving. There’s nothing more annoying than to have to stop drilling just to retighten the bit in the chuck. This tool drills faster than most, has anti-slip rubber grips and heavy-responsibility bit storage on either side of the tool. It feels nice in the hand, however is a bit heavy for a Lithium-Ion tool. This is a nice drill to use and will conquer any task you throw at it. LightThe light has a long-life, and a bright Xenon bulb. A nice feature is a belt clip on the light itself, also as a swivel head for adjusting the light to any angle. Theres a spare bulb under the lens cap This is a great feature. I cant believe nobody has thought of this before. It can take weeks to find the time to order a new bulb. Every work light should have another bulb. — Gabriel Shantara Ford.
Black & Decker BDCDMT106C Matrix 6 Tool Case
The Black & Decker BDCDMT1206KITC Matrix 6 Tool Combo Kit is powered by a 20-volt MAX motor which gives enough power for a full range of applications and attachments. The 20v Lithium Ion Battery – generally prepared, and holds a charge up to 18 months. The Matrix fast Connect System lets fast and easy change of a range of attachments which include a Drill-Driver, Sander, Jig Saw, Oscillating, and affect attachments. The affect driver attachment delivers high performance output without kick back, with a variable speed feature that lets for precision performance that’s right for each job. The sanding attachment is a versatile product that may be used for finish sanding, rust elimination, dry scrubbing, polishing, and detail sanding. The jig saw attachment is intended for tool-free blade changes for fast and easy change of blades, and the oscillating attachment accepts a range of Black + Decker accessories (sold individually) which may be used to cut drywall, metal, wood, plastic, composite and many other materials. Will include: (1) 20v Lithium Ion Power Unit, (1) BDCMTDD Drill/Driver Attachment, (1) Double-ended Bit, (1) BDCMTS Detail Sander Attachment, (6) Sheets of Sandpaper, (1) BDCMTJS Jigsaw Attachment, (1) Jigsaw Blade, (1) BDCMTO Oscillating Attachment, (1) common Adaptor, (1) Plunge Cut Blade, (1) Sanding Platen, (1) Sheet 60 Grit Sandpaper, (1) Sheet 240 Grit Sandpaper, (1) BDCMTI affect Driver Attachment, (1) Screwdriving Bit, (1) 20V MAX Lithium Ion Battery, (1) 20V MAX Charger, (1) Storage Case.
Factory-Reconditioned Porter-Cable PCCK60LR 0V MAX Cordless
This is a factory reconditioned product. Reconditioned usually means that the product was returned to the maker, who brings the product back to like new condition. Some merchandise may contain cosmetic blemishes. Will include 20V MAX Cordless Lithium-Ion 1/2 in. Drill Driver – PCC600BR, 20V MAX Cordless Lithium-Ion 1/4 in. Hex affect Driver – PCC640BR, (2) 20V MAX Lithium-Ion Compact Batteries – PCC680, 20V MAX Lithium-Ion Charger – PCC690, Kit Bag.
DEWALT DCK40C 0v Lithium Drill Driver/ (1.3Ah)
The DEWALT DCK240C2 20v Lithium Drill Driver/affect Combo Kit (1. 3Ah) is made up of the DCF885 20V MAX Lithium-Ion 1/4-Inch affect Driver which is compact (5. 55″ front to back) and lightweight (2. 8 lbs. ), intended to fit into tight regions. This unit offers one-handed loading 1/4″ hex chuck accepts 1″ bit info, and includes a 3 LED light ring with 20 second delay to offer visibility without shadows. A belt hook is included for portability on the worksite. The DCD771C2 20V MAX Lithium-Ion Compact Drill/Driver is compact and lightweight, intended to fit into tight regions. This drill/driver offers a high performance motor that delivers 300 unit watts out (UWO) of power capability, which lets for a large range of applications. This unit includes a quick transmission that delivers 2 speeds (0-450 & 1,500 rpm) for a range of fastening and drilling applications. The 1/2″ single sleeve ratcheting chuck gives tight bit gripping strength, and the ergonomic handle delivers comfort and control. Both tools are part of the DEWALT 20-Volt MAX system and are well-matched with all 20-Volt MAX batteries, chargers and accessories. Will include: (1) DCF885 20v MAX Lithium affect Driver, and (1) DCD771 20v Max Lithium Drill/Driver, (2) 20-Volt Maximum lithium-ion 1. 3Ah battery packs, (1) 20-Volt Maximum charger and freelancer bag.
4-Inch to 5-Inch Variable Speed Wet Polisher Grinder
5″ Wet Variable Speed Polisher (with GFCI Breaker, 900W, 500-4500 RPM). We generally attach the lock ring nut with the polisher (few seller do it). The lock ring nut is for you to use this polisher with cup wheel and saw blade. 1 Year Warranty. We typically attach some small gift (like 2 part of polishing pad and 1 part pad holder).
Kobalt Lithium Ion Cordless
Will include drill/driver, affect driver, two high-capacity Li-ion batteries, 1/4-in shank bit and an Li-ion/NiCd charger Drill/driver features a 2-speed gear box delivering 400/1,400-RPM to help complete heavy-responsibility applications, a keyless ratcheting chuck for high-stress work and an LED for working in low-light or black regions affect driver features a variable-speed trigger for optimum control on most applications and produces 2,500-RPM with 3,000-IPM. Its compact design lets it to fit in hard-to-reach places, and a fitted LED lets you to work in low-light or black regions Two 18-volt Li-ion batteries are well-matched with all 18-volt and 20-volt Kobalt power tools common charger returns batteries to full charge in 60 minutes, and is well-matched with all Kobalt 18-volt and 20-volt batteries 5-year warranty on tools and 3-year warranty on batteries All tools come with Kobalt’s 5-year annoyance-free ensure.
Ryobi P88 One+ 18v Drill Driver
Ryobi 18-Volt ONE+ introduces lithium-ion performance at Ni-Cd prices. This kit is powered by new and improved lithium-ion batteries. They hold a charge 4X longer, offer up to 20 more runtime and are 45 lighter weight than Ni-Cd batteries. Batteries stored on the IntelliPort charger are conditioned for peak performance. The drill will include a 1/2 inch heavy-responsibility single sleeve, keyless chuck with 24 position clutch to go with your drilling and driving needs. The affect driver has a variable speed trigger and 1,500 in. -lbs. Of torque supply control and power when driving long and big screwed or bolts. They both feature the exclusive MagTray and on-board bit storage, which let convenient placement of bits and screws.
Skil 898LI-40-RT 18V Cordless (Certified Refurbished)
This is a factory reconditioned product. Reconditioned usually means that the product was returned to the maker, who brings the product back to like new condition. Some merchandise may contain cosmetic blemishes. Will include 18V Cordless Lithium-Ion Drill/Driver – 2895-RT, 18V Cordless Lithium-Ion 5-3/8 in. SKILSAW – 5995-RT, (2) 18V Lithium-Ion Batteries, 18V Battery Charger, Carrying Bag.
- Bosch BAT622 18V Lithium-Ion 6.0 Ah FatPack Battery
- Bosch SBID39 Impact Tough SDB Set, 39-Piece
- Bosch MS4091 Drill and Drive Set, 91 Piece
- Bosch BAT621 18-Volt 5.0Ah Battery
- Bosch 27286 1/2-Inch Deep Well Socket Set, 9-Piece
- Bosch Bare-Tool CFL180 18-Volt Lithium-Ion Flashlight
Models to consider:
|XT258PM LXT245||AMZ: LDX120PK DCK492L2||K18CP-26A 2691-22LP|
|BP-1248N RK1806K2||DCK440X CLPK22120AL||DCK296P2 DCK292L2|
|PC3PAK 2791-22CT||FMCK014L2 KC10DFL||LXT601 XT218MB|
|PCCK612L2 EYC144V33||R9000SB PCL418IDC2||RPCN65D DCK421D2|
|DCK263D2 XT255MB||IQV20-202 DCK290L2R||MW-1 ZRP882|
|AB1PAK U/BTFP3KIT||K20-LC4000A XT260||XT258PMB XT257M-R|
|WG575.1 KC18DHL R||CLPK27-120-RT P780||JHPB-30 DCK275L|
|PCCK602L2R EYC194LR||Dck520d2 DCKTS340C2||CLPK27-120 K18CP-26A|
|PCFP12236R 2799-82CX||DDS18102LPB LXT902||CLPK22-120-RT-RB DCK274L|
|PCFP12236R DCK299P2||XT405 DCK211S2R||2791-22CT K18CP-26A|
|CLPK234181 PCCK616L4||CP8828K Dck520d2||PC3PAK DCK255X|
|R9000SB BP-1248N||ZRP825 EYC144V33||CLPK22-120-RT-RB EYC194LR|
|PCCK605L2 XT218||DC4CKITA DCK240C2XB||XT218MB DCK425C|
|979FSG CLPK27-120-RT||XT238X1 DCKTS340C2||XT248MB XT258PM|
|DCK440X LXT601||DCK592L2 CLPK33-120||DCK287D2 DEWDCK413S2|
|PCFP12656 JTK-32S||ARZ1204D RK1806K2||FMCK014L2 DWE4011|
|WG951.2 DCK440X||CLPK27-120 KC10DFL2||DCK275L ZRP884|
|DCK274L BTFP1KIT||LXT405 MW-1||CLPK234-181-RT CLPK22-120|
|U/BTFP3KIT WG951.2||KC10DFL2 RPFR2190T||ZRP882 DCK240C2XB|
|M1011 CLPK243181||P320 P360 XT405||RPFBC940 CLPK22120AL|
|2799-82CX DCK211S2R||K5SK-SP2 R9601||2691-22P PC3PAK|
|EYC151GQW CLPK234181||LXT902 RPCN65D||CLPK22-120 MAKLCT400W|
|PCFP12656 ZRP883||LCT208W K18CP-26A||DCK263D2 DCK275L|
|LXT405 BTFP1KIT||LXT702 P898||DCK940D2 XT257M|
|SR-2236M RK1806K2||XT255M DCK287D2||PCFP12234 37012D|
|R860052K P817||EYC18DV42 CLPK25180||DWE4011 KC18DHL R|
|LXT245 XT260||EYC194LR DCD775KL||STF-18VT Dck520d2|