Torque 2503LDFNSS (CDI) is a great value at this price
- This series features sturdy torsion beam design for dependable long life and accuracy
- Dial Torque Wrenches, Single Scale, Newton Meter
- Dial Torque Wrenches are designed for automotive, nuclear and industrial markets in addition to military installations throughout the world
- Enter your model number above to make sure this fits.
- Dial Torque Wrenches are designed for automotive, nucleanr and industrial markets in addition to military installations throughout the world
- This Product is manufactured in United States
Warranty: standard manufacturer’s warranty
S&H: Free shipping if ordered online
Dimensions and weight: check our reviews
Dial Torque Wrenches are intended for vehicle, nuclear and industrial markets also to military installations during the world. This series features tough torsion beam design for reliable long life and accuracy. Dial Torque Wrenches, Single Scale, Newton Meter.
Proxxon 23351 Wrench Micro Click 1 S, 3/8-Inch vs 2503-LDFNSS
Proxxon 23351 MICRO-Click 100/S Torque 2503LDFNSS Wrench 3/8 inch square drive to DIN 3120 (German Industrial Norm) is convertible for left handed threads. The 100/S Torque Wrench is good for torques from 20 to 100 Nm (Newton meters). Has big, legible scale of exact modification of wanted torque by turning knurled modification ring on end of handle. Push in ring to lock in position. Ratchet system has reversing lever for changing ratchet system. Features auto fast release that’s obviously audible with perceptible “click” upon reaching set torque. High accuracy plus or minus 3 %. Proxxon Torque Wrench 23351 comes with a tough blow molded storage case to protect Proxxon German quality industrial precision tool.
Allo 75-1 Series Bronze Ball Valve with Aumatic Drain, Two Piece, Inline, Lockable Lever, NPT Female
The Apollo 75-100 series two-part inline ball valve with auto drain is made of bronze and has a lockable lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass. This valve is mainly for use in pneumatic applications; it has an auto drain for releasing air pressure from the pneumatic system to which it’s connected. When the valve is in the “on” position, the drain vent is closed; when the valve is in the “off” position, air from the downstream system is vented to the atmosphere. This valve has a zinc-plated steel, lockable lever handle that may be locked in either the open or closed position using a movable lock (not included). The pounds per square inch (gauge) (psig) ranking for this valve is 600 for water, oil, and gas (WOG) and 150 for saturated steam. It’s inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Strengthened polytetrafluoroethylene (RPTFE) seats and multifill polytetrafluoroethylene (MPTFE) stem packing decrease the risk of valve leakage. This ball valve is standard (or regular) port for reduced valve size and cost and has a working temperature range of -20 to 450 degrees Fahrenheit. This valve is for use in water and air applications only and meets standard MSS SP-110 for quality assurance.
Stanley Pro J666CXCERT 3/8-Inch Ratcheting Head Micrometer 2-1-Inch und
Stanley J6066CXCERT Proto 3/8-inch Drive Ratcheting Head Micrometer Torque Wrench 200-1000 in-lbs Calibrated to +/- 3 in clockwise direction and +/- 6 in counter clockwise direction. Calibration is accomplished by mechanical loading of each wrench in a horizontal position and performing a three click test at 20, 60 and 100 of maximum instrument capacity. Certification papers traceable to N. I. S. T. (National Institute of Standards and Technology). Made to meet precision/greatly correct applications like military and aerospace.
25 in lb, 3/8 in Dr
Technical Specification Item Dial Torque Wrench Drive Size 3/8 Head Type Fixed main Scale Range 0 to 250 in. Lb. Main Scale Increments 5 in. Lb. Calibration certification Individually Serialized w/agreeing certification of Calibration Traceable to N. I. S. T Secondary Scale Range 0 to 30 Nm Secondary Scale Increments 0. 5 Nm in general Length 11-1/2 Rotation CW/CCW Accuracy +/-3 of Torque Reading 20 to 100 of Full Scale Memory Needle Yes Electric Light/Tone No Reset Type Memory Needle Min. Number of Cycles 5000 Housing Material Plastic and Steel Handle Type Rubber Grip Extension Handles No Meets/Exceeds – 2004, ISO 6789 Compliance & limitations Compliance and limitations None This listing is for each. _DELETE_.
Pro J623 1 2-1 Foot und Fixed Head Wrench
FEATURES:•will include an extension handle. •Torque wrench is 40″ long. Weight and over all length are for torque wrench with the extension handle. •Packaged in a metal box for easy storage. •Calibrated 3 of torque reading clockwise and 6 counter clockwise at 20 to 100 of full scale. •Certified wrenches to 2 one direction are available upon ask.
ACDelco ols ARM32-4S 12.5-25.7 ft-lbs 1/2" Electronic Digital Adapter with Buzzer & Flashing Notification vs CDI Torque 2503LDFNSS 1 2 pricing
ACDelco ARM302-4S 1/2-Inch Drive Digital Torque Adaptor gives torque setting range of 12. 5-250. 7 ft. Lbs. Memory capacity can store up to 30 sets of data. 2 LEDs flashing (green & red) for visual alert, and audible torque acknowledgement by means of buzzer. Lets to operate at 14 F degree to 140 F degree. Operation in both clockwise and counter-clockwise directions. Accuracy CW +-1. 5; CCW +- 2. 5. LCD display shows N-m (or kg-cm, in-lb. ft-lb) measurements. Turns a ratchet wrench into a digital torque wrench. Static torque measurement Standard functions: torque setting, measurement setting, mode setting. ACDelco Tools ACDelco power tools are constructed for people who make a living with their tools, day in and day out, despite of business you’re in and require dependability.
CTA ols 8952 25-Inch-und Micrometer Clicker-Type Wrench
CTA Tools 8952 Micrometer Clicker-Type Torque Wrench – 250-Inch-Pounds is intended to be micro-adjustable, with a bi-directional ratchet head and sliding band for setting torque. This wrench is a 3/8-Inch square drive with a range of 25-250-Inch-pounds (3. 61 – 29. 03 Nm). The tube is chrome-plated. This wrench is serviceable and its in general length is 13-Inch. Heavy-responsibility construction lets for strength and durability. If tuning up your ‘68 Corvette or changing the oil on a John Deere tractor, CTA can supply you with the tools required to do the job.
Neiko® 377B 3/8-Inch-Inch Adjustable 5-8 Foot-und Chrome Vanadium Steel vs CDI Torque 2503LDFNSS 1 2 review
Neiko Pro Tools gives you one of the most lasting auto torque wrenches on the market today and an remaining value, well-matched to name brand tools, however half the price. Handle turn torque selector registers foot-pounds and Newton meters; lock system is strong and easy to use, prevent accidental modification throughout functionings. Accuracy certified to +/-4, exceeds all international standards for torque wrenches. 3/8″ drive, 15-80 ft lb, adjustable in 0. 5 ft-lb increments. ABS storage and carrying case included.
hnichi Adjustable Screwr RTD22I (6 22 in.lbf)
Adjustable torque setting by twisting shaft with major and supplementary scales Lock ring holds selected torque value in place For Clockwise tightening only Click alerts user that torque set was achieved rotating slip system prevents over torque by ratcheting after click Accuracy +/-3% of indicated value Mid range models have removable colored resin grip big models will include hook to help with turning shaft to set tool for higher values. Accepts 1/4 hex bits (not included) will include certification of Calibration (NIST Traceable Cert offered for extra fee).
Capri ols 333 und Screwr, 1-5-Inch vs CDI Torque 2503LDFNSS 1 2 price
This 10-50 inch pound torque screwdriver features low range torque setting, enabling uninterrupted use without resets. Every part is ergonomically intended with a soft-grip handle for extra comfort. The wanted torque measurement is obviously indicated by meter window. 10-50 in-lb increments of 5 in-lb. Screwdriver bits will include 1/4-inch hex shank bit adapter with 20 bits: 5 pieces of Philips: 0x2, 1×2, 2×2, 3×2, 4, 6. 2 pieces of Slotted: 4, 6. 6 pieces of Torx: T10, T15, T20, T25, T30, T40. 4 pieces of Hex: 3, 4, 5, 6. Will include ABS carry case for storage. Each torque screwdriver factory calibrated with serial numbers, will include certification of calibration and a 1-year warranty offered by Capri Tools.
Gedore – DVV-4ZRS – 293 ft.-lb. Multiplier with 1:16 Ratio
Technical Specification Item Torque Multiplier Female Input Square Drive 1/2 Male Output Square Drive 1 Torque Measurement Type Foot-Pound Calibration certification Included Yes Max. Rated Input 230 ft. -lb. Max. Rated Output 2930 ft. -lb. Torque percentage 1:16 Gear percentage 1:16 Gear System Slipper Antibacklash Device Self contained Angle of Turn Protractor 5 Accuracy +/-3 Reaction System Arm Type Head Dia. 3. 4646 Material High Performance Aluminum Application Bridgebuilding, Bolting will include Molded Case This listing is for each.
Cementex 315TW38I 3/8-Inch Square 3 15-Inch/und Wrench vs CDI Torque 2503LDFNSS 1 2 reviews
This 3/8-Inch square drive 30 to 150-Inch/Pound torque wrench is a great addition to any electrician’s tool box. The Cementex 30150TW38I high voltage double insulated torque wrench is tested to 10,000-Volt and rated for use up to 1000-Volt AC and 1500-Volt DC. The 3/8-Inch drive torque wrench has a 30 to 150-Inch/pound range and is intended to tighten important connections on bus bars, battery racks and power panels. Features an audible click and feel impulse, low friction torque control system, documented certification of ± 4- accuracy, two calibration modifications and high visibility handle. Cementex is a closely held company recognized during the business as the only double insulated hand tool supplier which controls the complete manufacturing procedure from insulation through testing with an unparalleled commitment to quality and delivery. Our design driven company produces groundbreaking tools while left over dedicated to being a low cost maker.
- CDI 502LDFNSS CDI Torque 3/8-Inch Drive Dial Torque Wrench
- Snap-on Industrial Brand CDI Torque 2503MFRPH 1/2-Inch Drive Adjustable Micrometer Torque Wrench, Torque Range 30 to 250-Foot Pounds
- CDI 752LDINSS Torque 3/8-Inch Drive Dial Torque Wrench
- Craftsman 9-31425 Micro-Clicker Torque Wrench 1/2” Drive
- TEKTON 24335 1/2-Inch Drive Click Torque Wrench, 10-150-Foot/Pound
- CDI 1502LDIN 3/8-Inch Drive Memory Needle Dual Scale Torque Wrench, Torque Range 0 to 150-Inc
Models to consider:
|SCN7R J6060A||TCQJO32A 75MFIMHSS||J6476 SF713R/6|
|LTD1000CN ATG4.5Z-S||10573B J6168F||AFZ-TQD0204 SKT9505|
|SSD10P20S 120SF-A||TECH2FR100 MP300-5000||730NR/10QR SCN-M610SF|
|J6017B ATECH3FR250B||Northern_star111 T44085||502LDFNSS SKT0059|
|450DB3-S MP300-3000||2503TAA-CDI J6063C||2503TAA-CDI TC3F175F|
|14005NLDNSS 6004MFRPH||91NLDNSS KTI-72120||Yb100283 J6064C|
|J6375B KTI-72175||151LDIN 560/C4||BMC-947 6PAJ5|
|SCN12R832S 419X411||DB100NS RTD1.3I||DB50F-4AS 6PAF4|
|QL25N C4D600F36H||KD85066 5045P||1002CASG 100NMIMH|
|S11000 J6375B||450DB3-S QL25N||SF713R/6 91NLDNSS|
|J6373B BTGE50CN-G||J6177NMF G3862-1EG||DB75I-2AS J6212CERT|
|ATECH3FR250B 1800DB3-S||15SF 6PAF4||5445R 9S394|
|5045P MP300-3000||TECH2FR100 120SF-A||DB100NS 2503TAA-CDI|
|J6168F a13080600ux0073||0068004-B QL50N||MP300-5000 6PAJ5|
|SDR10P4N4 DTW-625F||W2000 C3FR250F||6PAF6 MAS-36i|
|BTG150CN-S 5050A||SKT9505 100NMIMH||J6017B BTG90CNS|
|03711B DMK 100||KTI-72132 1AM2102||QL3N4 75MFIMHSS|
|DB50F-4AS 1002CASG||J6064C M195||ACC20-3914 FC-00004|
|CE6380-2pk QL3N4||S11000 QL15N||AFZ-TQD0204 J6168F|
|6PAF4 US6752||KTI-72132 J6367B||H2DTW KD85066|
|DTW-625F QL50N||14005NLDNSS J6063C||J6006C 800NMIMH|
|2503CF3 MAS-36i||5445R 03711B||30DB4-S C4D600F36H|
|6PAF6 602NMRMHSS||419X411 J6212CERT||DMK 100 Northern_star111|
|a13080600ux0073 J6060A||31393A 2503TAA-CDI||W2000 450DB3-S|
|TCQJO32A DMSE 100||6004MFRPH ARM321-6A||TE743 DB100NS|
|TCQYO46A ES-625L1||C3FR250F 502LDFNSS||J6066C TC3F175F|
|SKT0059 BTGE50CN-G||J6375B 5045P||KTI-72120 5050A|