Find out more about DWS779 12" (DEWALT)
- This fits your .
- Backed by Dewalt’s 3 year limited warranty
- Exclusive Back Fence Design cuts up to 2×16 dimensional lumber at 90 and 2×12 at 45
- Super efficient dust collection system captures over 75 of dust generated.
- Powerful 15 Amp, 3,800 rpm motor delivers extended power and durability
Warranty: standard manufacturer’s warranty
S&H: Free shipping if ordered online
Dimensions and weight: check our reviews
The DEWALT DWS779 12″ Sliding Compound Miter Saw features a powerful 15 amp, 3,800 rpm motor that delivers expanded power and durability. It has a super economical dust collection system that captures over 75 of dust generated. This Miter saw also offers an exclusive back fence design which cuts up to 2×16 dimensional lumber at 90° and 2×12 at 45°.
I just bought this saw and am using it now (OK I am goofing off now) to put in a Pergo laminate floor. The saw is 200 cheaper than the model 780 but virtually same less some unneccessary bells and whistles like a laser display. The slide capability easilly extends to cut the flooring that could be too large otherwise. This is way more saw than I need, however the cheaper sliding saws I looked at were not much cheaper and were a big step down in quality, so I went with the Dewalt 779. My old miter saw is a 10 inch direct drive B&D as a point of reference. When you engage the trigger of the Dewalt, it starts fast with a powerful kick up I didn’t expect. This seems to be because it is a belt-drive and the sudden belt tension kicks it up. If you have finger skin at the trigger edge, the plastic trigger housing bites when it kicks up, be cautious of your finger placement. Likewise if you hover over your work part and choose it is not quite right, releasing the power trigger will because you to jerk the saw down when the belt tension releases. It comes with a general function low end blade that you’ll probably have to replace. Pergo Max (most likely other brands also) laminate floors have a surface that’s partly consisting of aluminum oxide, otherwise called "sapphire", which is hard. It’ll quickly dull a steel blade and wear a tungsten-carbide blade. There’s a special diamond coated Pergo blade, however at 200 is more blade than I need. I got a tungsten-carbide blade (70) for laminate flooring that exactly said for "sliding" miter saws. A sliding cut hits the laminate surface edge-on and cuts like butter. Bringing the blade down onto the laminate surface elicited a obvious "scream" from the blade. I wish I’d bitten the bullet an gotten a sliding miter saw sooner, however watch that pully drive kick.
Experienced homeowner/part time carpenter that does lots of good carpentry and cabinet making. Have owned Delta (back when they were top industrial tools), Jet, and Ridgid miter saws in the past, so I took the plunge it to get a 12" saw with one the slides. The work I do requires 1/32" tolerances at the max, and the old saw could not cut it and was impossible to calibrate. This saw out of the box put on the side any concerns I had about accuracy. Straight and bevel cuts are true and straight, and the stock blade is plentiful for now (will replace with Freud type). The kick back that everyone talks about only occurs in the handle, and the motor is super calm (in comparison to my Ridgid) and smooth. The base is hefty enough to take in start up, so rest guaranteed, your work part won’t slide or get knocked out of position while starting the motor. As for dust collection, though the dust bag is a bit dinky and small, it does a pretty great job collecting dust. Adding a vacuum line to this using a stepped adaptor will make it better. Condsidering that this simply a DWS780 without the gimiky XPS guide, this saw is an unbelievable deal, and really gives the other competitors a run for their money. I look forward to many years of this being my new sidekick.
This saw was dead correct out of the box. I use it for cabinetry and finish trim. I’m really enjoying the depth and length of cut I get out of this saw. The included blade is most likely good for general carpentry and will give you useful life if not abused. I need better cut finish so I upgraded to a Freud 100 tooth finish blade and get flawless cuts. I can do without the laser or XPS cutline that comes on the 780 saw particularly for 200. I really like the carry handle over the saw. I turn the saw to the miter extreme so the saw body is more aligned with the base and the saw is balanced well enough to carry with one hand by the handle. In general happy with this tool I am happy I bought it.
Bosch GCM12SD 120-Volt 12-Inch DB Glide
The New and groundbreaking GCM12SD DWS779 Glide Miter Saw delivers lasting precision, compact workspace, and unmatched smoothness of cut This saw features the Axial-Glide system which operates by folding the articulated arm flush with the back of the saw, saving up to 12-Inch of workspace versus a conventional sliding compound miter saw and enabling the saw to be operated with nearly no clearance behind it; ideal for jobsites and cramped workshops.
Craftsman 7-1/4 in. with Laser Trac
Convenient, movable design is ideal for hobbyist, crafts, molding work, framers and many other carpentry applications. East to use fast release knobs are oversized for comfy modification and fast cuts. Laser Trac laser guide assists with alignment. Many convenience features integrated like a project ruler, dust collection system and rubber, non-mar feet that are slip tolerant and protect from scratches. Powerful 9. 0-amp motor runs at 5,000 rpm with lasting cast aluminum construction. Will include 40 tooth thin kerf blade great for cutting many wood materials. 7-in. Ruler machined into right fence.
Makita LS1221 12-Inch Kit
Built to offer a high-capacity, heavy-responsibility saw to any worksite, the Makita 12-Inch Compound Miter Saw uses a bigger cutting capacity and high-powered motor for working on any job. Featuring a big 3-7/8-inch x 6-inch cutting area, this miter saw has the capacity to cut through any sized board or beam. The compound saws 15-Amp motor helps faster cutting, and can supply up to 4,000 rpm for finishing jobs as quickly as possible. This saw also uses a carbide-tipped blade, which makes exact cuts for longer before wearing out, decreasing maintenance time on the saw and blade substitute issues. A lightweight 37-pound design helps you move this 12-inch saw anywhere you need it, making sure that you may cut through work on any possible job.
DW716XPS with XPS, 12-Inch vs DWS-779
This DEWALT DW716XPS 12″ Compound Miter Saw features the integrated XPS Cross Cut Positioning System, with an integrated high intensity LED light that casts shadows of the blade to be used like a laser to point to cut place. No alignment needed; change blade, bump / transport. The XPS system is operated by a simple on/off switch. This saw has a high visibility bevel scale that makes bevel modifications fast and easy. A powerful 15 amp motor delivers 3,600 RPM for expanded power and durability. An easy to read scale lets you to make fast independent modification of bevel presets, the capability to swiftly bevel from side to side, with 9 bevel stops. This saw offers tall sliding fences that support crown molding up to 6-5/8 in. Nested and base molding up to 6-1/2 in. Vertically against the fence, while easily sliding out of the way for bevel cuts. Extra features on this miter saw include a miter pointer focused in a window for easy visibility, a bevel crown stop that may be reversed for either 52/38 or 45/45 crown, a cam-lock with miter detent override which makes it faster and more correct, and a louvered guard that lets the user to see the blade. Will include: DW716XPS Compound Miter Saw, Carbide Tooth Blade, Dust Bag, Blade Wench.
INCRA 1000/HD Gauge
The new INCRA Miter 1000HD is the most refined model still in the Miter 1000 series. The HD stands for High meaning, because the protractor plate’s exclusive AngleLOCK Indexing System has a whopping 180 angle stops in 1degree increments with special stops located at 22. 5 degrees. Add that high-resolution protractor with the business’s smoothest adjustable miter bar, telescoping IncraLOCK cut-off fence & Flip Shop Stop, steel vernier scale that reads to 1/10 degree, and you have got a winner that will improve the quality of any project. Are you cutting parts for segmented turning? The Miter 1000HD will let you to exactly set and quickly copy any angle you may need, if it is 18 degrees for cutting 10 sides, 25. 7 degrees for 7-sided objects, or anything else imaginable.
Jet JMS-12SCMS 12-Inch Dual-Bevel Slide
707120 Features: -Distressed:No -Application Material:Tile/Masonry -Power Source:Electric -Maximum Amperage:15 -No Load RPM:4200. Dimensions: -in general Height – Top to Bottom:22. 8 -in general Width – Side to Side:26. 3 -in general Depth – Front to Back:37. 4 -Blade:Yes -in general Product Weight:77 -Blade Length/Diameter:12.
Factory-Reconditioned Ryobi ZRTSS102L 13 Amp 10 in. with Exactline Laser
This Ryobi 13-Amp 10 in. Sliding Compound Miter Saw with Laser features 9 positive miter stops with ball and detent action for precision cuts. It has a 10 in. Carbide-tipped blade for a smooth cut and an electric brake that stops the blade fast for extra safety. The saw comes with an Exact line laser that gives a guide line for cutting. It also comes with table extensions that offer added support when you are working with big pieces. This is a factory reconditioned product. Reconditioned usually means that the product was returned to the maker, who brings the product back to completely working condition. Some merchandise may contain cosmetic blemishes, scrapes, scratches and dirt but should work like new. If this is a gift, keep this in mind. The factory gives a 1 year warranty available through a nationwide network of service centers. Buy receipt is needed.
TruePower 01-0805 Mini, 3 1/8-Inch
9000 RPM 120V/60Hz/2. 5A motor w/6ft grounded cord Accepts 3″ to 3-1/8″ diameter blades (3/8″ arbor) Table stops at 0Degree, 15Degree, 22. 5Degree, 30Degree & 45Degree Left & Right Cutting capacity: at0Degree: 1″ x 1-15/16″ / at45Degree: 1″ x 1-1/4″ Max. Cut depth adjustable Fence length: 11-3/4″ Workpiece clamp capacity: 1-14/16″ will include 3-1/8″ carbide tipped blade(36 tooth), spanner, wrench & in depth operating information UL listed.
DWS780BL Double Bevel with 96T Precision Trim Blade,
The DEWALT DWS780BL 12-Inch Double Bevel Sliding Compound Miter Saw was intended to be exact and correct enough for good woodworking, still lasting enough for framing and deck building. The DWS780 is ideal for a range of end users, as well as cabinet makers, trim carpenters, framers, installers, and many other professional freelancers. This saw features the XPS LED light and cut alignment system that casts a laser-like shadow on the work surface for cutting accuracy. The saw’s dual bevel system will include the capability to bevel right and left from 0 to 49 degrees with positive stops at 0, 22. 5, 33. 9, 45, and 49 degrees in both directions, also as a high visibility bevel scale. The saw also miters 60 degrees to the right and 50 degrees to the left and features an adjustable stainless steel miter detent plate with 10 positive stops. A cam lock miter button lets users to lock angles between detents for versatility on the jobsite. The saw features a powerful 15 amp motor that delivers 3,800 rpm. For convenience, the power cord is routed through the rail in the back, eliminating interference with the slide. Also, the saw offers an business-leading mix of cut capacities, which will include 6-3/4 inch vertical capacity, 7-1/2 inch nested crown capacity, 13-7/8 inch horizontal capacity, and exclusive back fence design that cuts up to a 2 by 16 at a 90 degree angle and 2 by 12 at a 45 degree angle. To change and maximize vertical cutting capacity, the unit will include a rail lock latch for holding the head away from the fence. It also will include an economical dust collection system that captures over 75-% of dust generated.
Ryobi ZRTSS102L 15-Amp 10 in. Certified Refurbished
Perform angled cuts up to 45 degrees on boards up to 8 in. Large with the Ryobi TSS102L 15-Amp 10 in. Sliding Miter Saw with Laser. Common crown moulding angles have positive miter stops with ball and detent action for exact recurring cuts, when a fast-action lever lets users to override any of the nine predetermined stops to lock in any angle. This 4800 RPM saw makes everyone a precision craftsman courtesy of the integrated laser that depicts the cutline along the workpiece. Features: Maximum crosscut dimensions: 90 degrees – 3-1/2 in. X 12 in. ; 45 degrees – 2 in. X 8 in. Sliding head gives maximum capacity for up to 12 in. W boards at vertical bevel Miter stops located at common crown molding angles: 0, 15, 22. 5, 31. 6 and 45 degrees (left and right) Adjustable exact-line laser alignment system precisely aligns cutline with blade and is internally powered (no batteries obliged) expanded miter varies from 45 left to 50 entitlement to accommodate a large range of cuts Miter detent override gives fast-action lever bypass with one simple motion Equipped with horizontal D-handle for utmost visibility and comfort. Will include: ZRTSS102L Compound Miter Saw with Laser Carbide-tipped Blade Blade Wrench Dust Bag Work Clamp Operator’s Manual. This is a factory reconditioned product. Reconditioned usually means that the product was returned to the maker, who brings the product back to completely working condition. Some merchandise may contain cosmetic blemishes, scrapes, scratches and dirt but should work like new. If this is a gift, keep this in mind. The factory gives a 1 year warranty available through a nationwide network of service centers. Buy receipt is needed.
DW717 10-Inch Double-Bevel
If you are cutting baseboards or crown molding, the DEWALT 10-inch double-bevel sliding compound miter saw gives fast, correct cuts to finish the job. Thanks to a powerful motor, an easy-to-change cam-lock miter handle, convenient miter and bevel stops, plus a tall fence for accomodating oversized moldings, this saw is prepared for a range of crosscutting and miter cutting applications. 10-Inch Double-Bevel Sliding Compound Miter SawAt a Glance: Powerful 15-amp motor delivers no-load speed of 4,000 RPM Adjustable stainless steel miter detent plate with 11 positive stops Tall sliding fence for work with crown and base moldings Four hardened steel bevel stops on each side for versatility Two steel horizontal rails for correct blade travel Three-year restricted warranty and 90-day money-back ensure This saw features a 15 amp motor and a no-load speed of 4,000 RPM. View bigger. This double-bevel sliding compound miter saw quickly cuts baseboards and trim. View bigger. Smart, Powerful Design for fast, correct CutsThe DEWALT double-bevel sliding compound miter saw’s 10-inch blade is supported by a powerful and reliable 15-amp motor. Offering a no-load speed of 4,000 RPM, it makes fast work of cutting framing or molding, also as other crosscutting and miter-cutting jobs. This tough saw is intended to deliver exact cuts, allowing for the versatile setups obliged for miter applications. The exact miter system’s adjustable stainless steel miter detent plate features 11 positive stops for easy setup and improved efficiency. An easy-to-change cam-lock miter handle delivers fast and correct miter angles, and features a convenient detent override, which lets you to change the miter setting without the saw slipping into the miter detents. And the saw’s big miter capacity–0 to 60 degrees to the left and 0 to 52 degrees to the right–adds versatility. Tall Fencing and Compact Sliding RailsThe tall fence supports 6-1/4-inch crown molding nested vertically, also as 6-inch base molding set against the fence. The fence slides out of the way easily when it is time to make bevel cuts. This saw stays compact thanks to its sliding saw dual horizontal steel rails, which feature an groundbreaking clamping system and linear ball bearings for increased accuracy and durability. Increased Bevel Capacity and Convenient StopsThis saw is intended to deliver fast, correct bevel cuts. You may be able to easily set up for bevel cuts that measure between 0 and 48 degrees to the left and to the right. This useful setup gives increased capacity for big jobs and lets you to flip the saw instead of the material. Plus, with some number of bevel stops, it makes finding and setting the bevel angles a fast, easy procedure. Ideal for a range of applications, the saw’s distinctive back fence design lets it to deliver clean, 45-degree bevel cuts through dimensional lumber that measures up to 2 by 14 inches. Movable and well-matched with the DEWALT Laser SystemThis lightweight sliding compound miter saw weighs just 51 pounds and features a fitted carry handle, so you may be able to move it around the jobsite easily and lift it comfortably when it’s time stow the saw at the end of the day. For extra accuracy and easy use, this saw is well-matched with the DEWALT DW7187 adjustable miter saw laser system (sold individually), which assures that the cutting line is easy to see via a red laser line. This 10-inch double-bevel sliding compound miter saw also comes with a DEWALT warranty package that will include a three-year restricted warranty and a 90-day money-back ensure. What is in the BoxOne DEWALT DW717 10-inch double-bevel sliding compound miter saw. The exact miter system’s adjustable stainless steel miter detent plate features 11 positive stops and can rotate 90 degrees for a large range of cuts.
Bosch GCM12SD 120-Volt 12-Inch DB Glide
The New and groundbreaking GCM12SD Glide Miter Saw delivers lasting precision, compact workspace, and unmatched smoothness of cut. This saw features the Axial-Glide system which operates by folding the articulated arm flush with the back of the saw, saving up to 12-Inch of workspace versus a conventional sliding compound miter saw and enabling the saw to be operated with nearly no clearance behind it; ideal for jobsites and cramped workshops.
- DEWALT DWX726 Rolling Miter Saw Stand
- DEWALT DW3128P5 80 Tooth and 32T ATB Thin Kerf 12-inch Crosscutting Miter Saw Blade, 2 Pack
- DEWALT DWX723 Heavy Duty Miter Saw Stand
- Freud D12100X 100 Tooth Diablo Ultra Fine Circular Saw Blade for Wood and Wood Composites, 12-Inch
- DEWALT DW7231 Miter-Saw Workstation Tool Mounting Brackets
- DEWALT DWX724 Compact Miter Saw Stand
Models to consider:
|LS1016L LS1216LX4||00932286000P TS1143L||C12FDH C12RSH2|
|DWS709 MITERV120||C10FCH2 LXSL01||TS1345L C12RSH|
|ZRTSS102L DW713R||TS1143L C8FSHE||C10FSHPS C12FDH -R|
|DWS780 C10FSBP4||LS1018 LS1016LX5||DWS709R RK7136.1|
|ZRTSS102L C10FCE2||DCS361B P26561287||CM8S C10FSBP4 -R|
|DCS361M1 DW716XPS||P36561287 DWS780||R4122 ZRTS1345L|
|C15FB GMSUDR15L||C8FSE LS1216L||LS1221 R4120|
|DHS790AT2 PW1029||DW716R R48607K||ZRR4112 PI561287|
|C10FSHPS -R MS1290LZA||P48561287 SM1850BD||P551 LS1016L-R|
|C10FSHPS DCS361M1||MS1290LZA GMSDR1015LC||TSS120L LXSL01|
|C8FSHE DW718||AIFMS10CSz PUSAW29||MS255SR R4120|
|LS1221 DW7084||XSL01Z DW717||DW716 GCM12SD|
|C12FDH -R ZRTSS102L||LXSL01Z DWS709R||R4513 P48561287|
|C12FDH P26561287||LS1016L ZRR4112||DW717R DW713|
|CM12SD JMS-12SCMS||DW716XPS EK6101||CM8S PI561287|
|TS1345L C10FSHPS -R||ZRTS1143L AIFMS12DL||DHS790AT2 TS1143L|
|C10FCE2 SM1850LW||C8FSE ZRTSS102L||GMSUDR15L LS1216LX4|
|W1323A SM1850BD||C10FSBP4 -R C12RSH2||C12RSH KS 120 EB|
|DWS709 C12RSH||C10FSHPS LS1016L-R||DWS709R EK6101|
|R4122 GCM12SD-RT||DW716R C12FDH||KS 120 EB C10FCH2|
|AIFMS12DL P36561287||TS1143L R48607K||LS0815F TS1143L|
|W1323A ZRTSS102L||DWS780 R4513||CM8S PW1029|
|ZRTS1143L C10FSHPS -R||R4120 DW7084||CM10GD TS1345L|
|PUSAW29 GCM12SD||C10FCE2 DWS780BL||C15FB JMS-12SCMS|
|LS1216L ZRTS1345L||DW713R XSL01Z||P26561287 DW716XPS|
|DHS790AT2 C12RSH2||CM12 LS1018||SM1850BD P551|
|ZRR4112 MITER1000/HD||MS255SR C12FDH -R||LS1016LX5 TSS120L|