If you are thinking about getting DWS709 Slide (DEWALT) read this review
- Adjustable stainless steel miter detent plate with 13 positive stops
- Compact, lightweight design
- Tall sliding fences, and exclusive back fence design
- Powerful 15 Amp, 3,800 rpm motor
- Oversized bevel scale
Warranty: standard manufacturer’s warranty
S&H: Free shipping if ordered online
Dimensions and weight: check our reviews
The DEWALT DWS709 12″ Slide Compound Miter Saw features a powerful 15 Amp, 3,800 rpm motor that delivers expanded power and durability. It has tall sliding fences that support crown molding up to 5-1/2″ nested and base molding up to 4-1/2″ vertically against the fence, while easily sliding out of the way for bevel cuts. An exclusive back fence design cuts up to 2×14 dimensional lumber at 90 degrees, and 2×10 at 45 degrees. This saw offers an adjustable stainless steel miter detent plate with 13 positive stops which improves productivity and assures cutting accuracy. Miters 60 degrees to the right and 50 degrees to the left increased capacity. The oversized bevel scale makes bevel angle modifications correct and easy. This saw includes a compact, lightweight design (51 lbs. ) that lets for easy transport and storage. It has dual horizontal steel rails with linear ball bearings that deliver an correct, lasting and compact saw. The exact miter system and machined base fence support optimize it is durability and cutting accuracy. Will include: Carbide Blade, Blade Wrench, Dust Bag, Users Guide, Material Clamp.
I recently bought this saw at Lowe’s, not amazon. I have had the older DW708 saw for over a decade and love it but have noticed recently the blade has worked on a slight wobble (about 1/64 of an inch. ) it is the saw, not the blade because every blade I attempt on it does the same thing. I can still cut crown and make other good finish cuts, it is just something I have to be aware of. I bought the DWS709 as a substitute for the shop and have relegated the DW708 as a jobsite saw. The 1st thing I noticed picking the DWS709 up out of the box is it’s lighter than the DW708. I also noticed it’s somewhat wider when I tried to put it between the fences on my shop bench. Not much, enough I had to move one over fence to get it to fit. Luckily the height is exactly the same. It doesn’t seem to slide as easily as my DW708, however I have heard that complaint about DeWalt sliders since they went with the horizontal guide bar design. Though this saw is alike to the current DWS780 model, I was aware that for 200. 00 less there were some thing this saw was not going to have or do. The maximum width it can cut is shorter, than that of my 708, however I can deal with that. It doesn’t have a light. It doesn’t have a laser. It most likely is missing a couple of other bells and whistles I do not know about, however the one that got me is there’s no depth stop on this saw. It seems to use the same aluminum casting as the 780 models, however the hole where the depth stop should be attached to swing out hasn’t been tapped for threads, and the hole for the modification screw isn’t there. It is not a feature I use frequently, however. It is nice to have when you do need it. It does come with a hold down attachment, which I do not need in the shop, however was happy to see it fits nicely on my old DW708. All in all, great saw, great price, just be aware of what you are to get.
This is a great miter saw made by Dewalt. The description doesn’t say, however this is really a dual bevel sliding compound miter saw. What that means is you may be able to tilt the saw either to the left or right side and cut moldings laying flat. This is very useful when you’re doing bigger crown moldings that won’t sit properly along the fence. You just have to make modifications for bevel and miter for your specific crown, then cut it laying flat. I have tested this out with some smaller 4 inch crown moldings, and baseboards laying around and it sliced through them like butter. I also used the sliding function to test out cutting some 2x4s and again it did a great job. The saw came square right out of the box and needed no modifications. It packs lots of power and feels rugged. It’s stating to be light, and at 50+ pounds, it really is for a saw. I have a Hitachi C12FDH 12 inch, non sliding, and a 10 inch sliding Sears Craftsman. The power of this is comparable to the Hitachi, however the Hitachi is non sliding and was half the price on sale. The Hitachi is able to cut base moldings up to 5 inch and came with a laser. The sliding is great for when you’re doing laminate flooring, and it is simpler to tear the laminate with a sliding cut than straight down. In comparison to the 10 inch Sears, this one had way more power and tore it lots easier. You’ll want to upgrade to the 80 tooth good blade for moldings and flooring, as the stock blade is good for rough cuts in lumber. I wished this came with a laser, however that’s an upgrade. This saw can only cut base moldings up to 4 1/2" vertically so you’ll have to use a compound cut for the bigger 5 1/4" base molding.
This compound sliding miter saw is well built, lightweight and more compact than competing 12" saws from other brands like Ridgid or Bosch. It is prepared to use right out of the box, no modifications needed, and it gives correct cuts. Modifications are easy. The sliding system works easily with no resistance, and the bevel modification handle in the back is easy to loosen and tighten to set the bevel angle. This is an entry-level model, so you do have to give up some features in comparison to the costly models: pre-set angle stops, a lift handle, a work light, cut adjusters; and the screw-style miter lock isn’t as easy and convenient as the flip lever lock found on other Dewalt saws. The blade guard offers good protection and doesn’t get in the way with the work part. The sliding fence and work hold down may be adjusted easily. All cuts are clean and true. I recommend this saw for its build quality, accuracy, compactness, light weight (50lbs roughly) which make it simple to take to and move around a job site.
Makita LS1018 Dual-Bevel 10-Inch
Makita LS1018 10″ Slide Compound DWS709 Saw has a big cutting capacity and Accuracy right out of the box. It’s ideal for baseboard and crown molding installation, finish carpenters, cabinet and furniture makers, wood floor installers, deck builders, general construction and more. Note: refer in depth information on pages 19-20 of the Instruction Manual that explain how to change the cutting angles.
Factory Reconditioned Ryobi ZRTSS120L 15 Amp 12 in. Sliding Saw with Laser
Introducing the new 12 in. Sliding miter saw from Ryobi. This saw matches pro respectable features like a heavy-responsibility motor and an adjustable laser at an unbelievable value making this saw a no brainer for any home or jobsite. Features: Heavy-responsibility 15-Amp motor to easily cut through bigger material Sliding head gives maximum capacity for up to 13-1/4 in. Cross cut Adjustable Exactline laser alignment system precisely aligns cut line with blade and is internally powered (no batteries obliged). Expanded miter varies from 45 left to 50 degrees entitlement to accommodate a large range of cuts. Miter detent override – fast action lever bypasses miter detent index points with 1 simple motion Machined cast-in miter scale for correct table alignment Sliding miter fence gives support for wider material and easily changes for bevel cuts Fixed dust port maintains the ideal position to optimize dust collection efficiency 1-1/2 in. Dust port gives connection to standard dust collection systems to help keep work area clean Horizontal “D” handle for improved comfort Spindle lock for easy single wrench blade changes Electric brake stops the blade in seconds. This item is Factory Reconditioned. Reconditioned usually means that the product was returned to the maker, who brings the product back to like new condition. Item may show evidence of previous handling and/or cosmetic blemishes.
Spray Foam Insulation 29" for 1/2 Lb Foam
Demand’s 29″ Scarfing Spray bubble Hand Saw is the finest in the business. It features a high affect tolerant handle, 29″ cutting surface and very sharp replaceable serrated edge. They may be sharpened many times before needing to be replaced. The 29″ Scarfing Hand Saw can handle all your bubble elimination needs. Those 24″ wall studs.
Bosch GCM12SD-RT 12 in. Dual-Bevel Glide Saw (Certified Refurbished) vs DWS-709
This is a factory reconditioned product. Reconditioned usually means that the product was returned to the maker, who brings the product back to like new condition. Some merchandise may contain cosmetic blemishes. Will include 12 in. Dual-Bevel Glide Miter Saw – GCM12SD-RT, Material Clamp, Dust Bag.
INCRA 1000/HD Gauge
The new INCRA Miter 1000HD is the most refined model still in the Miter 1000 series. The HD stands for High meaning, because the protractor plate’s exclusive AngleLOCK Indexing System has a whopping 180 angle stops in 1degree increments with special stops located at 22. 5 degrees. Add that high-resolution protractor with the business’s smoothest adjustable miter bar, telescoping IncraLOCK cut-off fence & Flip Shop Stop, steel vernier scale that reads to 1/10 degree, and you have got a winner that will improve the quality of any project. Are you cutting parts for segmented turning? The Miter 1000HD will let you to exactly set and quickly copy any angle you may need, if it is 18 degrees for cutting 10 sides, 25. 7 degrees for 7-sided objects, or anything else imaginable.
10 Inch Sliding Saw with 45 Degree Bevel and Dust Bag, Extension Bars and Table Clamp
Make perfect miter cuts up to 12 in. Large with this powerful sliding miter saw featuring dual linear ball bearing rails for smooth slide action. With a 45 degree tilting blade, and easy access brushes this sliding miter saw is versatile, user friendly and powerful enough to manage a range of tasks. This amazing miter saw has an generous cutting capacity for its size. Amperage (amps) 15 Bevel capacity (degree) 1-9/16 in. X 12 in. Maximum speed (rpm) 5000 RPM Arbor size 5/8 in. Blade size 10 in. Cord length 6-3/4 ft. Maximum cut depth 90 deg 2-3/4 in. X 12-3/16 in. Product Height 22 in. Product Length 35-1/2 in. Product Weight 29. 6 lbs. Product Width 17-3/16 in. Accessories Included: 60 tooth carbide blade, dust bag, extension bars and table clamp.
DWS780 Double Bevel Sliding Saw
The DEWALT 12″ Double Bevel Compound Miter Saw is powered by a 15A 3,600 RPM and offers a new exact miter system and machined base fence support for best accuracy. Features a new handle design for maximum portability, cam lock miter, detent override, bevel crown stops and is best in class capacity. Constructed for easy, annoyance-free use saw’s capacities are miter 0 to 60 degree left, 0 to 50 degree right, bevel 0 to 48 degree left and right, cross cuts 2 x 14 on 90 degree and miters 2 x 10 on 45 degree, base capacity 6-1/2″ left and right with a crown capacity of 6-5/8″. Carbide blade, dust bag, wrench and manual, 90 day money back ensure, one year service, three year restricted warranty and accessory DW7187 adjustable miter saw laser system included. Weighs 54 pounds.
Makita LXSL01Z 18V LXT Lithium-Ion Cordless 7-1/2 Inch Dual Saw (Tool Only)
Will include 18V Cordless LXT Lithium-Ion 7-1/2 in. Dual Slide Compound Miter Saw (Bare Tool) – LXSL01Z-R, 7-1/2 in. 40T Saw Blade – A-90912, Dust Bag – 122852-0, #10 Socket Wrench – 782223-9, Triangular Ruler – 762001-3, Vertical Vice – 122571-8, (2) Extension Wings – 322312-4, Bare Tool – Battery and Charger Sold individually.
DCS361B 20V Max Cordless Saw Bare Tool
DEWALT DCS361MB 20V Max Cordless Miter Saw Bare tool utilizes a 20V Max Battery Pack (DCB204) which gives on average, 183 cuts of 2×4 Pine – or 275 cuts of 3-1/4 Pine baseboard. It offers an integrated XPS cross cut positioning system that gives modification free cut line indication for better accuracy and visibility. The 7 1/4 Inch Sliding Miter Saw features a single left bevel which varies from -3Degree to 48Degree left. With a 3 1/2 inch maximum vertical, 3 5/8 inch crown nested, and 2×8 inch horizontal cut capacity, this saw will handle most of the common cuts needed. The adjustable stainless steel miter detent plate has 10 positive stops to enhance productivity and assures cutting accuracy. An oversized bevel scale makes bevel angle modifications correct and easy. The compact, lightweight design (31. 6 bs. ) lets for easy transport and storage. It has a cam lock miter handle which delivers fast and correct miter angles, with a exact miter system and machined base fence support for optimized durability and cutting accuracy.
Festool Kapex KS 120 Sliding Saw
The Festool Kapex miter saw comes with Festools high-quality 60-tooth carbide blade for use if cutting woods or soft plastics, an angle move device, a hold-down clamp for securing material, and a wrench for unit modifications. Compact and lightweight at 21. 5 kg (47 pounds), you may be able to use the good modification handle to control bevel angles in fractions of a degree. The bevel handle has three settings: positive detents at 0 and -45 degrees, free motion between -45 and +45 degrees, and free motion up to +/- 47 degrees. Bevels may be made to the left or right, and the bevel gauge seems on both sides of the saw. The Kapex blade creates a thin kerf which decreases load on the motor and improves the cut quality. The blades are specially intended to decrease sound levels and dampen vibration. The big 30mm arbor hole decreases blade deflection. A special cutting position lets the Kapex to have a cutting capacity as big as 4-3/4-inches (120mm). The deck height of the Kapex matches the height of our systainer 1 storage containers. On the job site, you may be able to use one or more systainers to support the material being cut. The difference in height between the MFT/3 and MFT/3-Kapex multifunction tables is equal to the height of the deck best work flow and support. The Magnesium alloy base of the Kapex was intended to be very rigid and lasting still lightweight. Rubber feet in each corner supply useful traction and fit into the grid hole pattern of any Festool multi-function table. Features Festools patented FastFix blade change system. Turning the FastFix handle locks the arbor, mechanically locks out the trigger, and lets the blade to be changed with a single hand. Dual-line lasers define the complete cut area. Festool merchandise can only be sold in the 50 states.
Factory-Reconditioned Ryobi ZRP551 ONE Plus 18V Cordless 7-1/4 in. Saw with Laser (Bare Tool)
This is a factory reconditioned product. Reconditioned usually means that the product was returned to the maker, who brings the product back to like new condition. Some merchandise may contain cosmetic blemishes. Will include ONE+ 18V Cordless 7-1/4 in. Miter Saw with Laser – ZRP551, Carbide-Tipped Blade, Blade Wrench, Dust Bag, Work Clamp, Carrying Handle, Bare Tool – Battery and Charger Sold individually.
Ridgid MS1290LZA Sliding with Laser
Ridgid MS1290LZA 12-inch Compound Sliding Miter Saw with Laser features a Blade Depth modification too-free modification gives the capability to make dead on drabbet cuts. The 15 amp heavy responsibility motor powers through the most hard cuts, while the 2-1/2-inch dust port gives connection to standard dust collection systems to help keep work area clean. Fast release miter and bevel locks gives users with easy access to make fast angle modifications. Bevel stop pin fast action levered pin releases or bypasses bevel detent index points with one simple motion. Work clamp with fast-release lever securely hold material in place. The dual bevel and expanded miter range is 0 degrees to 47 degrees dual bevel, and 0 degrees to 60 degrees miter capacitates with crown molding stops to accommodate a large range of cuts. Repeat-A-Cut marking surface lets user to mark fence for recurring cuts. Big extended table gives extra material support for the increased demands of a sliding miter saw. Zero clearance adjustable throat plate gives material maximum cut through support. Fast action Miter detent thumbwheel releases or bypasses miter detent index points with one simple motion. Plans: Motor: 120 V, AC 15 amps, No Load Speed: 4,000 r/min. (RPM), Blade Arbor: 1 in. Blade Diameter 12 in. Weight: 70 lbs. Cutting Capacities: Baseboard against fence: 5 1/2 in. Max. Cross Cut: 13 1/2 in. 90° Cross Cut (nominal); 2 in. X 12 in. Or 4 in. X 4 in. 45° Miter Cut (nominal): 2in. X 10 in. 45° bevel Cut (nominal) 2 in. X 12 in. Will include MS1290 Miter Saw, Exactline adjustable laser guide, carbide tipped blade, dust bag, dust guide, work clamp, blade wrench, hex keys, operator’s manual.
- DEWALT DWX726 Rolling Miter Saw Stand
- DEWALT DW3128P5 80 Tooth and 32T ATB Thin Kerf 12-inch Crosscutting Miter Saw Blade, 2 Pack
- DEWALT DWX725B Heavy Duty Work Stand with Miter Saw Mounting Brackets
- DEWALT DWX723 Heavy Duty Miter Saw Stand
- DEWALT DWX724 Compact Miter Saw Stand
Models to consider:
|C8FSHE DW715R||H26-260L KS 120 EB||R4122 RK7136.1|
|C10FSHPS LS0815F||00932286000P DW713||TS1143L R48607K|
|SM1850BD CM12SD||DW717R LS1018||W1323A DWS780|
|AIFMS12DL DW716||C12FDH -R LS1040||DWS779 C10FSBP4 -R|
|SM1850LW DWS780BL||P36574553 LS1016||P551 EK6101|
|LS1216LX4 DWS780||P48561287 LS1216L||C12RSH2 CM12|
|LXSL01 P26561287||GTA3800 DW715||MITER1000/HD AIFMS10CSz|
|JMS-12SCMS CM8S||DW718 XSL01Z||R4513 PW1029|
|DCS361M1 C15FB||ZRR4112 LS1016L||TS1345L DW717|
|C8FSE CM10GD||DW716 C10FSHPS||R4513 W1323A|
|C10FSBP4 C8FSHE||LS1221 C15FB||C12FDH SM1850LW|
|LS1016LX5 TSS120L||PW1029 C10FCE2||RK7136.1 MITERV120|
|PI561287 GCM12SD-RT||LS1040 ZRTSS102L||P26561287 R4120|
|DW715 TS1143L||LS1216L EK6101||AIFMS12DL TS1143L|
|C12RSH DCS361M1||DWS779 LS1216LX4||DW716XPS P551|
|LS1016L DW715R||GCM12SD MITER1000/HD||R4122 LS0815F|
|KS 120 EB MS1290LZA||C10FCH2 ZRR4112||LS1018 GMSDR1015LC|
|LXSL01Z DW716R||R48607K JMS-12SCMS||C12FDH -R SM1850BD|
|TS1143L GTA3800||DHS790AT2 ZRTS1345L||LS1216LX4 GCM12SD-RT|
|DWS780 TS1143L||PUSAW29 C10FCH2||LS1040 LXSL01|
|PW1029 DW715||DWS779 CM10GD||P36574553 ZRTSS102L|
|DW715R GMSDR1015LC||MITERV120 JMS-12SCMS||H26-260L C12RSH|
|LXSL01Z DW716XPS||RK7136.1 AIFMS10CSz||DW7084 CM12SD|
|TSS120L P48561287||GCM12SD MITER1000/HD||DW718 MS1290LZA|
|KS 120 EB C15FB||DCS361M1 LS0815F||C12FDH DWS780BL|
|C8FSHE C10FSBP4||TS1345L ZRR4112||DCS361B LS1016|
|P26561287 ZRTSS102L||P36561287 AIFMS12DL||DWS780 C12FDH -R|