April 21, 2017

Check this out about 98420224 Comfort (Grundfos) reviews


Graphs

How Grundfos 98420224’s price changed over last several months:
If you want to purchase 98420224 you don't really have to wait
AutoAdapt PM Comfort reviews compared with other similar products:
Analysis of Comfort AutoAdapt PM with other products

Info

Features:

  • ECM permanent magnet motor
  • AutoAdapt mode learns and adapts to consumption patterns
  • Three modes: AutoAdapt, temperature, and 100
  • Head, max: 3.9-Feet
  • 115V, Auto, Check valve, 1-1/4″ NPSM union, 6ft. line cord (ISO valve)
Other Info for this deal:

Warranty: standard manufacturer’s warranty
S&H: Free shipping if ordered online
Dimensions and weight: check our reviews
Coupon/Sale: n/a


General description

The COMFORT PM AUTO range sets new standards for energy-economical hot water recirculation in residential homes. Thanks to a low sound permanent magnet motor, energy intake is reduced to as little as 5-8. 5 W. Using AUTOadapt assures the pump only runs when obliged. The result is maximum comfort with lower wait times for hot water, decreasing water and electrical waste.


Recent reviews of Grundfos 98420224 Comfort PM AutoAdapt Recirculation Pump NPSM, 1 1/4-Inch:

This replaced the older generation model Grunfos recirculator, model UP 10-16 BU/ATLC, which gave out after 7 years of hard use. Enhancements over the last model include an AUTO sensing function, which obliged the sensor being installed on the hot line outlet from the water heater. So far, after about 2 weeks of use, it can predict demand and change to run as indicated by demand. But, I have also noticed that throughout off demand hours the pump gives adequate hot water. Throughout on demand times, the hot water comes fast and mad, a certain improvement over the old model which obliged defined times to turn on/off or be on all the time. This AUTO calibration function is worth it for the pump alone. Will see how this holds up, however seems everything is an improvement.



Amazing pump. Get the one with 1-1/4" unions, which makes it a breeze to R&R the pump, though the ‘head’ (motor + controller) spins off the housing with the big brass band to access the impeller and replace the motor without touching the housing. The unions have fitted ball valves, and the pump’s housing has a fitted anti-siphon valve. No have to add an external one. The pump? Wow. You put it on 100 setting after refiling the heater tank and purging air from the system, and it assists get the bubbles out that way. Then, toggle it to ‘auto’ and. Amazing. It learned my behavior in a day and I had hot water in five seconds at the far end of the house.





Compare with similar products:

2" 0.5 HP Submersible Dewatering Float Switch: No

R400-115 Float Switch: No Features: 98420224 -Optional Float Switch with choice of 33′ or 50′ cord. -Light dewatering. -2” Top discharge. -304 Stainless steel motor housing. -3,450 RPM. -Rated Amps: 6. -Discharge Size: 2”. -Max Solids:. 125” in diameter. -Max Head: 39′. -Max GPM: 67. -Cable: 33′. Plans: -0. 5 HP. -0. 5 HP with stainless steel outer casing. -115 Volts. Dimensions: -Weight: 33 lbs.


98420222 Sweat, /2-Inch

The COMFORT PM AUTO range sets new standards for energy-economical hot water recirculation in residential homes. Thanks to a low sound permanent magnet motor, energy intake is reduced to as little as 5-8. 5 W. Using AUTOadapt assures the pump only runs when obliged. The result is maximum comfort with lower wait times for hot water, decreasing water and electrical waste.


2", 200 G "S" Series Water with 5.5 HP Honda GX Engine

SE2UL E5HCP Features: -Housing, Volute & Impeller: glass-strengthened polyester. -Shaft Seal: stainless steel with carbon and ceramic faces, EPDM fitted. -interior Fasteners: stainless steel. -External Fasteners: plated steel. -Carrying handle. -EPDM O-Rings and gasket. -Check valve. -Self-priming. -Overhead valve design. -Fast, easy, dependable starting. -Meets CARB and EPA emission standards. -Cast iron cylinder sleeve. -Electronic ignition. -Oil Alert/Low Oil Shut off. -Port Size: 2”. -Flow: 200 GPM. -Max Head: 126 ft. -PSI: 54. 5. -706 Impeller. -Atrazine. -Bicep. -Bladex. -Bronco. -Bullet. -Liquid Nitrogen Solutions. -Phosphoric Acid Solutions. -Dual. -Extrazine. -Fallowmaster. -Honcho. -Lannate. -Lasso. -Modown. -N-Serve 24. -path. -Ranger. -Roundup. -Sevin 4 Oil. Plans: -5. 5 HP Honda Series GX160. -Engine: 5. 5 HP Honda GX160. Dimensions: -Weight: 48 lbs.


ACT D’MAND KONTROLS System S3-00-PF Series System

System will include an electronic circuit board, thermosensor mounted in stainless steel volute, 3/4″ CPVC threaded connections and interior check valve. PF Kit will include two (2) stainless steel 3/4″ ID, 18″ corrugated flexlines with threaded male/female ends and two (2) custom machined tooled no lead brass T’s. Suggested for use with standard plumbing systems in building up to 4,000 sq. Ft. With tank water heaters. Or pipe runs up to 100 lineal ft. Between a tankless water heater and installation place of the D’MAND KONTROL System.


RIDGID /4 HP Submersible Utility

The RIDGID 1/4 HP Submersible Utility Pump features a brass garden hose fitting for durability and strengthened thermoplastic housing to help prevent corrosion of the volute and impeller. This pump has a thermally protected, oil-filled motor to help prevent overheating. The bottom-suction design removes water to inside 1/8 in. From the surface and the easy-access handle gives portability. Pumps up to 1350 GPH at 0 ft. 20 ft. Power cord to reach the toughest places Removes water fast down to 1/8 in. Of surface Corrosion tolerant thermoplastic housing for long life in tough UTILITY applications Top center 3/4 in. Brass discharge design for balanced installation Removable stainless steel screen filters debris for increased dependability Easy-access handle for portability Pump self primes after the housing is firstly filled with water Top-center discharge gives for balanced installation and motor cooling MFG Model # : TP-250 MFG Part # : 57715-RHD1.


ACT D’MAND KONTROLS System C3-00-PF Series System

System will include an electrical circuit board, thermosensor mounted in composite volute, 3/4″ CPVC threaded connections and interior check valve. PF Kit will include two (2) stainless steel 3/4″ ID, 18″ corrugated flexlines with threaded male/female ends and two (2) custom machined tooled no lead brass T’s. Suggested for use with standard plumbing systems in buildings up to 4,000 sq. Ft. With tank water heaters. Or pipe runs up to 60 lineal ft. Between a tankless water heater and installation place of the D’MAND KONTROL System.


Rice Hydro MTP-5 Manual Hydrostatic Hand Test s, 500 psi, High Pressure /4" Outlet Hose, 8′ Length

Rice Hydro MTP-15 Manual Hydrostatic Hand Test Pumps, 1500 PSI, High pressure 1/4″ outlet hose, 8 foot length. Intended for testing small diameter water lines, in regions like landscaping, plumbing, and residential. Distinctive dual check valve system decreases water bleed-back and user exhaustion. Features and plans: 3/4″ swivel inlet, shut off valve, and rubber grip handle. Dual check valve system prevents water “bleed-back”. Less user exhaustion, shorter test times. Stainless Steel liquid filled gauge assures correct readings. With 3 Gallon Water tank. Weight: 12 pounds, Shipping Dimensions & Weight: 18 x 17 x 15, Shipping Weight: 15 pounds.


SEAFLO 2V 5.5 G 60 PSI Water Diaphragm Pressure

Features & Benefits: Positive displacement pump, Can run dry, calm operation, Demand Pump, Easy connect fittings, business standard mount pattern, fitted thermal protection, common Applications: farming Spraying, General Industrial, vehicle, Marine/RV, Type: 5 chamber positive displacement diaphragm pump, self priming, able of being run dry Mode: Demand Liquid Temperature: 140F (60C) Max. Priming potential: 6 feet (1. 8 m) suction lift Max Pressure: 60 PSI (4. 1 bar) Inlet/Outlet Ports: 1/2″-14 MNPT Weight: 7 lbs (3. 17 kg) responsibility Cycle: uninterrupted Leads: 16 AWG, 4. 5″ long with/Leads, 2-Pin connector Voltage: 12v.


Rice Hydro DP-3B Hydrostatic Test, Triple Diaphragm, g Up to 550 psi, Pressure Testing, 4 Cycle Briggs and Stratton Engine with Oil Ale

Rice Hydro DP-3B Hydrostatic Test Pump, Triple Diaphragm Pump, 11 GPM up to 550 PSI, pressure testing, (Kappa), 4 cycle Briggs & Stratton Engine, with oil alert. Hydrostatic Test Pump. The DP-3B is a big volume medium pressure hydrostatic test pump. Intended to let handling of up to a 10 chlorine solution, suggested for testing water lines up to 24″ in diameter. Features and plans: 11 GPM up to 550 PSI; 163 CC 5. 5 HP, air-cooled, 4 cycle Briggs & Stratton Engine, with oil alert; auto Pressure regulator with inlet bypass; Stainless Steel liquid-filled gauge assures correct readings; Rugged roll cage construction, protects pump from damage; Weight: 116 pounds Dimensions: 28 x 25 x 25 Shipping: 136 pounds.


ShinMaywa 50CRXP2.75S Norus High Flow Stainless Steel Submersible, Horsepower

The ShinMaywa Norus Series submersible pumps are some of the most dependable and lasting pumps sold today. On the outside it has a distinctive corrosion tolerant hardware design made of stainless steel and poly amide fiber strengthened resin.   also, it features a cast aluminum bearing housing, and a vibration decreasing bearing design which gives superior heat dissipation and structural honesty compared to competing pumps.   The Norus series pumps are the most dependable, highest efficiency, lowest lifetime cost of any pump in its class.


/6 HP 5Volts Speed Cast Iron Circulator

UP4375F Features: -Recirculator pump. -Material: bronze and stainless steel. -Aluminum stator housing. -Stainless steel spherical separator. -Stainless steel / tungsten carbide rotor. -Stainless steel, epdm, pu, ptfe, graphite rotor and impeller. -Brass ms 58 pump housing. -PPO separation valve. -PA66/6 terminal box cover, motor cover. -Lexan light. -PVC cable, cable break. -EPP 55 insulating cover. -EPDM o’rings. -POM check valve. -UP43-75F is a cast iron circulator with high flow, medium head characteristics. -Wet rotor design. -Composite impeller. -removes and prevents corrosive effects of new water. -Maintenance-free, low energy intake, easy to install, calm running. -Improved performance and efficiency. -Pre-program handling times to save power. -No extra wiring obliged. -Adds to savings by operating pump by sensing the water temperature with optional timer and aquastat. -Whisper-calm operation for sound sensitive installations. -Applications include, hydraulic heating, fan coil heating, Solar heating, and radiant heating systems. -Flow range: 0 – 45 US GPM. -Head range: 0” – 312”. -Motors: 2 pole. -Insulation class: F. -Phase: 1. -Maximum liquid temperature: 230 F (110 C). -Minimum liquid temperature: 36 F (2 C). -Maximum working pressure: 145 PSI. Will include: -2 Gaskets Included. Plans: -230 volt variant can be available upon ask. -Recirculator engine: 1/6 HP. -Power intake: 25 watts. -Voltage: 115 volts. Dimensions: -Connection: flange – (2) 05” diameter screw holes. -Dimensions: 12. 19” H x 8. 5” W x 8” D.


98420223 FNPT, /2-Inch

The COMFORT PM AUTO range sets new standards for energy-economical hot water recirculation in residential homes. Thanks to a low sound permanent magnet motor, energy intake is reduced to as little as 5-8. 5 W. Using AUTOadapt assures the pump only runs when obliged. The result is maximum comfort with lower wait times for hot water, decreasing water and electrical waste.



What people considered before buying it:
  1. Grundfos 98420223 Comfort PM AutoAdapt Recirculation Pump FNPT, 1/2-Inch
  2. Grundfos 98420222 Comfort PM AutoAdapt Recirculation Pump Sweat, 1/2-Inch
  3. Grundfos 98420210 Comfort PM Recirculation Pump FNPT, 1/2-Inch
  4. Grundfos 595916 1/25 Horsepower Comfort Series Recirculator Pump
  5. Watts 500800 Hot Water Recirculating System with Built-In Timer


Models to consider:
BT14-45 PC3F1558IUF00FP7110T TP-250GHP2626 ST2WPLT-CA
S3-100 HYWP80-TPUP63 A-G3672K50CR2.15S SFDP1-012-035-21
SDT-50557 ST2037SFDP1-055-060-51 4008-101-A65SE2UL E5HCP PUMP-12V
MTP-15 EV8000-103G325AG DP-3B700PTP-1 RL50CON
U041-281 HCU15SAQUATEC-ERP-1000 U042-281TTC3-100 S3-100-PF
131-143RP 300209DP57729-WYNG 50CRXP2.75SR400-115 M137
X2024 SEP50M50CR2.4S 57399-WYN4BT20-30 SPM222
BT14-30 G25AN57811-WYN1 SFDP1-055-060-51WSP33K1AA W0001
50CR2.75S 002-AU-20439PSA2 500 SVP10057727-WYN1 PSTF2 400
GHP2626 HCF-175SPM222 50CR2.25S131-143RP 4008-101-A65
U042-281TT A-TRHD03-001G325AG PSTF2 400ST2037 BT14-30
50CR2.4S 57399-WYN4AQUATEC-ERP-1000 002-AU-20439S3-100-PF HCU15S
PS2 500 UP2699FM137 OT-20160119-02SDT-50557 HYWP80-T
U041-281 DP-3BRL50CON BT20-3050CRXP2.75S WSP33K1AA
MTP-15 G25AN50CR2.75S EV8000-103A-G12-C S3-100
SFDP1-012-035-21 TP-250R400-115 FP7110TPSA2 500 SFDP1-055-060-51
BT20-40 SVP10057809-WYN1 SE2UL E5HCP300209DP PUMP-12V
SFDP1-055-060-51 W0001EV8000-103 57729-WYNGAM004488 C3-100
EV8000-103 GHP2626BT14-30 TP-250BT14-45 57729-WYNG
50CR2.75S 50CR2.25SC3-100-PF 300209DPPUP63 HYWP80-T
HCU15S PC3F1558IUF00FP7110T A-G3672KPUMP-12V 700PTP-1
EV8000-103 A-G12-CSPM222 W0001U041-281 M137
50CR2.15S A-TRHD03-001AQUATEC-ERP-1000 57811-WYN1HCF-175 C3-100
DP-3B SFDP1-055-060-51SE2UL E5HCP R400-115OT-20160119-02 002-AU-20439
57809-WYN1 RL50CONX2024 57399-WYN44008-101-A65 AM004488
MTP-15 ST2037G25AN U042-281TTS3-100-PF G325AG
SFDP1-012-035-21 50CR2.4S57727-WYN1 S3-100SFDP1-055-060-51 BT20-30

Subscribe

Subscribe to 98420224 best prices tracker for your city/stores

Select area


Select Store


Product Versions:


Email: