XPH102 18V (Makita) is a great value at this price
- Makita-built 4-pole motor delivers 480 in.Lbs. Of max torque
- This fits your .
- Weighs only 3.9 lbs. With battery for reduced operator fatigue
- Features extreme protection technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions
- Variable 2-speed design (0-600 & 0-1,900 RPM) (0-9,000 & 0-28,500 BPM) for a wide range of drilling, driving and hammer applications
- Compact and ergonomic design at only 7-3/4″ long
Warranty: standard manufacturer’s warranty
S&H: Free shipping if ordered online
Dimensions and weight: check our reviews
Official Makita XPH102 Site
The Makita 18V LXT Lithium-Ion cordless 1/2-inch hammer driver-drill combines speed and torque in a compact size, with an economical Lithium-Ion battery that reaches a full charge in only 30 minutes. For increased versatility, it may be run as a driver-drill or a hammer driver-drill, and is engineered for applications in wood, metal, masonry, and concrete. The Makita-built four-pole motor delivers 480 in. Lbs. Of max torque and up to 1,900 RPM and 28,500 BPM in the high-speed setting. With extreme protection technology (XPT), the drill is engineered for increased dust and water resistance and is ideal for use in severe job site conditions.
I am a metal roof freelancer who was using these Lithium-Ion drills since they 1st came out about 10 years ago. I put in about 2000 screws a day. The small batteries will put in at least 250 1-1/2 inch screws through metal and into wood. The bigger batteries will put in at least 500. I still use the 1st one I bought. The brake stopped working, however the drill still works, with the batteries. I have dropped these drills off roofs and have never broken one. I have one drill that I’m about to wear through the plastic on. Wearing away the drill itself can be the only way to destroy these things. My only complaint could be the high low switch on the hammer drills starts to slip out of gear between high and low from repeated pounding. (I slam the screw down hard enough to start it through the metal) I put a short zippy screw although the switch to hold it in place. I greatly recommend these. These drills could be a money maker for me, if they cost 1,000. 00 I have never had a tool that has worked so hard and lasted so long.
Did over 40 hours work with this bad boy and it work pritty good powerful for a 18volt great job makita.
I am really happy with it so far. I compared it with a Milwaukee drill and I much favored the feel and performance of this drill. The only thing that worries me about this drill is that the battery look looks kind of cheap / basic. Do not get me wrong, it feels like it is at least moderately well made, however it seems like it may be dated. Only time will tell if it’ll last. Also, by the cost-to-performance percentage, this drill wins hands down depending on everything else I found and compared it to. I most likely spent about three hours doing comparisons.
Chicago Pneumatic CP785H 1/2-Inch Standard Duty Air Drill
Chicago Pneumatic CP785H 1/2” General XPH102 responsibility General function Drill Teasing throttle for exact control Side handle for extra control and comfort Handle exhaust decreases sound and directs air away from work Triple planetary gearing for smooth operation and expanded life Applications drilling • hole sawing and cylinder honing plans Free Speed: 500 rpm Shipping Weight: 4. 00 lbs. What is IN THE BOX? • Chicago Pneumatic CP785H • Manual WARRANTY • Full CP Tools Factory Warranty • 30-Day Satisfaction ensure Chicago Pneumatic was founded well over 100 years ago and is the leading provider and final brand in power tool performance and quality of car equipment. CP has surpassed the industries demands making them the #1 premiere choice for professionals. They’re also the world leader for car Service with a large range of high quality tools for the most challenging jobs on cars, trucks, buses, and off road equipment.
HM1214CX 27-Pound AVT Demolition
Dig, chip, and break concrete more proficiently – and with less unwanted vibration – using the HM1214C demolition hammer from Makita. This tool features the company’s exclusive Anti-Vibration Technology (AVT) to bound vibrations and improve performance. A powerful 14-amp engine produces 950 to 1,900 blows per minute (BPM), while an auto brush cutoff system helps increase the tool’s life. An electronic dial allows you to change the speed to fit your project. This model will include a 1 inch SDS-Plus rotating Hammer.
Bosch HDS181-02 18-Volt 1/2-Inch Compact Tough Drill Driver with 2 High Capacity Batteries, Charger and Case
Prepared for all drilling applications in materials from concrete to wood to metal, the lightweight still powerful Bosch HDS181-02 Compact Tough cordless hammer drill/driver’s 7-1/2-inch head length is the smallest in its class, still it delivers top performance with strong power. It works with all Bosch 18-volt lithium-ion batteries, and this kit will include two thin Pack 1. 5 Ah HC (high-capacity) batteries. They supply up to 50 % more runtime over standard lithium-ion batteries and include an electronic battery fuel gauge to ensure you have enough power for the job. More power in a smaller size with 4-pole open frame motor(view bigger).
XT610 6-pc. Combo, vs XPH-102
The Makita 18V LXT Lithium-Ion cordless 6-part Combo kit is built for the pro-user who requires a large range of best-in-class cordless solutions. The XT610 delivers six Lithium-Ion cordless tools for drilling, driving, fastening, cutting, grinding, demolition, and more. The XT610 will include a ½” hammer driver-drill with 480 in. Lbs. Of max torque, an affect driver with 1,460 in. Lbs. Of max torque, a 6-1/2″ round saw that will cut 2X material at 45°, a Recipro saw with 0-2,800 SPM, a 4-1/2″ Brushless angle grinder with 8,500 RPM, and a rechargeable flashlight with Xenon bulb. The kit also will include two 18V LXT 3. 0Ah batteries, a fast optimum charger, and tool bag.
DEWALT DCD985B 20-Volt MAX Lithium Ion 1/2-Inch Drill/Drill Driver
The DEWALT DCD985 20V Max lithium ion premium 3-speed hammer drill/driver has a patented 3-speed all-metal transmission that matches the tool to task for the fastest application speed and improved run time. The heavy-responsibility 1/2-inch metal ratcheting chuck gives superior bit gripping strength. It has a high power.
Milwaukee 5387-20 8.5 Amp 1/2-Inch Drill
Milwaukees 1/2-Inch 2-Speed Hammer-Drill gives you with a powerful, lasting tool with dual speeds to assist you with drilling and fastening jobs. Its 8. 5-amp motor guards the tool from overloading as it assists you with applications that vary from fast and simple jobs to those that take longer and are more hard. This Milwaukee hammer drill is as versatile as it’s powerful with its two different speed settings. One speed runs up to 16,000 BPM and 1,000 RPM, while the other raises the output to up to 40,000 BPM / 2,500 RPM for harder tasks like drilling and fastening in concrete. Its gear casing is made with a lasting metal, which guards against damage from recurring use. The Milwaukee 1/2 inch hammer drill features a pistol grip and it’s intended to be both balanced and lightweight, which limitations the user exhaustion that frequently results from expanded periods of work.
DEWALT D25763K 2-Inch SDS Max Combination
The DEWALT D25763K 2″ SDS Max mix Hammer Kit features SHOCKS – Active Vibration Control which decreases vibration felt by the user at the handles; this is a DEWALT Perform and Protect feature. It includes a 2-stage clutch for maximum control in adhere-up situations; also a Perform and Protect feature. 15. 5 Joules of affect energy gives maximum performance in drilling & chipping, and the 15 Amp motor gives maximum overload protection & power. This unit offers electronic variable speed which lets the user to control the speed of drilling or chipping while maintaining speed under load. It has a rear handle mount that means less bending over when using tool in down drilling applications. Trigger lock on decreases user exhaustion while chipping. An electronic soft start gives the user more control when the trigger is pulled. This hammer is intended for best concrete drilling at 1 to 1-3/4″, and offers a no load speed of 125-250 rpm, and blows per minute at 1,150-2,304 bpm. Will include a kit box, a 360 side handle, and a User Guide.
Milwaukee 2207-21P M12 12V Fork Meter with 2410 Drill Combo
Milwaukee’s 2207-21P kit combines the M12 12-volt cordless fork meter and the M12 12-volt 3/8-inch drill-driver, making it the ideal addition to any freelancer’s or electrician’s arsenal of tools. The drill-driver’s two speeds, compact and movable design, and integrated LED and fuel gauge increase productivity for drilling and fastening projects in wood and sheet metal. And the fork meter’s three-in-one potential-voltage measurement, current measurement, and LED work light-let users to carefully multitask when testing electrical panels, motors, security systems, and more. 2207-21P KitWith M12 Fork MeterAnd Drill-DriverAt a Glance:Drill-driver features 250 inch-pounds of torque and no-load speeds of 0-400/0-1,500 RPMFork meter’s large jaws and high current range support more applicationsBoth tools use Milaukee’s M12 lithium-ion batteryTools supported by five-year restricted warranty; battery supported by two-year warrantyThe Milwaukee M12 cordless fork meter lets users to carefully measure voltage and current (view bigger). About the Drill-DriverThe 2410-20 drill-driver offers a two-speed (0-1,500 and 0-400 RPM), lasting metal gear box to offer up to 35 faster drilling and fastening than other comparable drill-drivers. Its powerful motor delivers 250 inch-pounds of torque-25 more than comparable models-for fast, economical results when driving most small fasteners, also as the runtime of full-day driving without recharging. Also, the 2410-20 is easy to manage and hold thanks to its lightweight and compact size. Measuring just 7-3/8 inches and weighing only 2. 5 pounds, the 2410-20 is the ideal size for your tool belt and decreases user exhaustion over long projects and tasks. For extra convenience, and to ensure user-friendly operation, the 2410-20 features a clear, bright LED for improved visibility also as an on-board fuel gauge so you will generally have power when you need it. About the Fork MeterThe 2207-20 M12 fork meter is the ideal multitasking tool for electricians who have to measure voltage and current. Its high-end Lo-Z measurement feature removes ghost voltages, and the true-RMS tester makes for correct measurement. Its 200-amp AC measurement potential and large 0. 63-inch jaw opening support more applications than conventional fork meters. User-friendly features also improve efficiency. The fork meter’s fitted LED work light increases visibility in dim electrical panels and other tight spaces. The backlit white-on-black display removes eye strain and gives easy measurement reading, in the black and in direct sunlight. A thin design lets the meter to fit effortlessly into pockets and on tool belts for easy access. Accessories include an 8-inch by 4. 5-inch by 1. 5-inch soft nylon storage case to house the meter and test leads and probes and other things, also as a magnet meter holder to mount the fork meter to any ferrous surface to free up users’ hands for related tasks. About the M12 Series of Batteries and ToolsA cordless tool is only as dependable as its battery-that is where M12 lithium-ion batteries come in. Users can trust the 1. 4-amp-hour lithium-ion battery that powers each Milwaukee M12 tool to deliver long runtimes and fade-free power. Lithium-ion batteries will also offer long battery life, so you will save money by keeping away from replacements. Since lithium-ion batteries are considerably smaller and lighter than competitive ni-cad batteries, they play an integral role in making Milwaukee’s compact M12 tools ergonomic, comfy to use, and easy to maneuver while you work. Launched in 2008, the M12 series from Milwaukee offers compact, lightweight tools that are easy to transport and easy to maneuver on the job. Groundbreaking designs that target application- and trade-particular performance let M12 tools to live up to Milwaukee’s repute for durability and heavy-responsibility construction while left over smaller, easier to manage, and more versatile than many competitors’ tools. What is in the BoxOne Milwaukee 2207-20 M12 cordless fork meter, one 2410-20 M12 cordless 3/8-inch drill-driver, one M12 lithium-ion battery pack, one 30-minute charger, one electrical test lead set, one magnetic meter holder, one soft accessory case, and one carrying case. The 2207-21P kit also will include the M12 lithium-ion battery charger and the 2410-20 M12 cordless 3/8-inch drill-driver (click each to expand).
Bosch HDH181XBN 18-volt Brute Tough 1/2-Inch Drill/Driver with Exact Fit Insert Tray
The Bosch HDH181X 18-Volt Brute Tough 1/2-Inch Hammer Drill/Driver now features Active answer Technology, an business 1st that decreases the risk of dangerous kickback throughout high torque applications without compromising performance. Active answer Technology uses electronic motor control to decrease the risk of harmful torque reactions in adhere-up situations. An integrated acceleration sensor limitations the tool’s rotation by detecting sudden movements and cutting off the motor to stop the tool. Feel more in control with the redesigned secondary handle. This handle is longer than last variants and adjustable to 23 positions without having to take off it from the tool. A tongue-and-groove locking structure helps prevent slipping and increases control throughout use, while the 1/2-Inch metal chuck delivers a high clamping force. Tackle the toughest drilling and driving applications with 750 in-lbs of torque from the 4-pole open frame motor. Choose between 2 speeds and 25 clutch settings to optimize available torque for exact screw driving and improved drilling speed. Built to be Brute Tough, the HDH181X features exclusive Durashield housing and an all metal gear box and is able of surviving 25 drops from 12 feet high onto hard concrete. Bosch electronic motor protection helps prevent overheating and overloading – which extends tool life and runtime. The Bosch HDH181XBN will include: (1) Bosch HDH181XBN Brute Tough 1/2-Inch Hammer Drill/Driver, (1) Belt Clip and (1) Exact-Fit Inlay Tray. Bosch Exact-Fit Tool Inlay Trays are intended to work with the Bosch L-BOXX system and hold individual tools in place with room underneath to store tool accessories. The battery and charger are sold individually.
Ampro A2425 1/4-Inch Mini Reversible Air Drill with Keyless Chuck
Item Type: 1/4″ Mini Reversible Air Drill W/ Keyless Chuck Description: 1/4″ Mini Reversible Air Drill W/ Keyless Chuck (Industrial Grade)Ideal For Heavy responsibility Drilling, Engine Work And Other Auto Body ApplicationsHandle Exhaust Directs Air Away From Work SurfacePistol Grip Design With Non-Slip Rubber HandleKeyless Chuck Construction For Easy Drill ReplacementDrill Capacity. 3/8″ (10Mm)Spindle/Thread Size. 3/8″ – 24Free Speed. 2,800 RpmAvgAir intake. 4. 0 Cfm (113 L/Min)Air Pressure. 90 PsiAir Inlet. 1/4″ Npt (Pt)Hose Size. 3/8″ IdWarranty: Coverd by make’s WarrantyBox Dimension: 6. 89 x 5. 51 x 1. 77 inch. Box Weight: 1. 1 lbs.
DEWALT DWD520K 1/2-Inch VSR Pistol Grip drill
H-D 1/2″ and HAMMERDRILL KIT – 10. 0 Amp motor with 980 watts max out power 2-speed range – 0-1 200 / 0-3 500 rpm 0-56 000 bpm hammer action Metal gear housing for durability 1/2″ chuck with key and holder 360 deg. Locking side help handle Steel depth rod – comes in h-d kit box Capacity: 1/2″ in concrete & steel.
HM1810X3 70 Lb. AVT Breaker
458-HM1810X3 Features: -Counterbalance system decreases vibration to only 8 m/s2 for unmatched comfort. -Lowest sound level in its class at only 107dB. -Accepts well-liked 1-1/8” hex hammer steel. Plans: -Drive Size: 1 1/8 in. -Drive Type: Female Hex. -Voltage: 115. 00 V. -Voltage Type: AC/DC. -Frequency: 60. 0 Hz. -Amps: 15. 00 A. -Cycle Rate: 1100 blows/min Max. -Control Type: On/Off. -Handle Type: Back D-Handle/Top D-Handle. -will include: (4) Bits, Hex Wrench #5 (783203-8), Cart (122010-A). -Type: Demolition Hammer. Extra information: 64 LB. AVT BREAKER HAMMER W/ FREE CART & 4 BITS Cost is for a min. Order of 1/EA UNSPSC: Testing Approvals:.
- Makita T-01725 Impact Drill-Driver Bit Set, Black Oxide, 70-Piece
- Makita B-35097 Impact Gold Ultra-Magnetic Torsion Insert Bit Holder
- SE 7503SD 3-Piece Power Extension Bit Set for Drills
- Makita T-01373 38 Piece Impact Drill-Driver Bit Set
- Topbatt BL1830 194204-5 18 Volt 3.0Ah Lithium-Ion Replacement Battery for Makita Tools
- 18V 4.0Ah Li-ion Replacement Battery for Makita Cordless Drill BL1815 BL1835 LXT-400 BL1840(GERIT BATT)
Models to consider:
|DR670 RH540S||DMS 180 DV18DSDL||LXPH03Z SBE 1100|
|PH-24T HDS180-02||CP7150 HM1307CB||HK1810 DWE5010|
|XPH01CW TPMR68||H90SG XPH12M||BHP454 HM1214CX|
|DCD950KXR DWMT70785||US602199550 2207-21P||XPH06Z D25761K|
|DC988KA UH700||PC70THD HM1810||FDV16VB2 R R8611503|
|CP785H 2697-22CTB||XT268T HDH181X-01L||XT263M P1812|
|122MAX BH2770VCD||HP1640 XPH07Z||R86116 P1874|
|RHH181-01 DCK299P2||HDS181-01 11264EVS||DW505KR BE 1100|
|XPH07M HP2010N||LXRH011 PH04R1||HM1214C DCD996P2|
|XPH01Z SBE 1100||PCC620LB FDV16VB2 R||DCD950KXR RK2808K2|
|DCD796D2BT EB244||RH540M CP717||D25712K PCC620B|
|XPH10R BHR240||2697-22CTB D25313K||HDH181X-01 PCC620LBR|
|PCE141 HP1641K||HP1640 DWD110K||LXRH011 R8611501|
|ZRP213 P1812||R8611501K DWD520||SB18LTX BL 52 DCK299M2|
|HM1214CX PH-24T||1761801RT UH700||LXRH01Z 11264EVS|
|DCD985M2 HDH181X-01L||SB 18 LT BARE DWD112||DCD996B TUC-67-HD|
|XT268T CP717K||H90SG HDS181-02||1204T002 RHH181-01|
|LXPH01CW DV18DSDL||DW505 GIDDS2-3554587||2207-21P HM1810|
|XPH12M XPH07Z||DR670 HP2010N||D25651K DCD796D2BT|
|JCO-2R-ST DWD525K||XT268T PCE141||XPH07M 1191VSRK|
|XFD01Z XT263M||DC725KA HM1810||CP717K HM1317CB|
|DCD985M2 PH-24T||PC1800CHD DW245||HM1214CX ZRP213|
|PC700D R8611501K||SB18LTX BL 52 122MAX||DW511 2697-22CTB|
|R8611503 DV20VB2 R||HDS180-02 DWD110K||LXRH01Z LXPH01CW|
|114GQC XPH06Z||RH540M PH04R1||PCC620LB SB 18 LT BARE|
|DWD520K CP9285||BE 1100 XPH06||XPH01CW 121Q|
|DCD996B P817||P213 633501RT||HP1640 te-70|