Miner 1V_TGP-001 (Gold) is a great value at this price
Warranty: standard manufacturer’s warranty
S&H: Free shipping if ordered online
Dimensions and weight: check our reviews
The gold miner comes with the most advanced spiral wheel on the market. The groundbreaking, computer intended, Concentrate agitators means a raise in gold recuperation by 30+. The gold miner’s spiral wheel also has a 7 spiral lead running at roughly 12 revolutions per Min, for the highest gold recover rate. Gold miner comes with: 13″ spiral wheel, pump & spray bar assembly, catch Cup for gold, drive unit with frame, tailings container, pump filter, carrying case with cover, & a 5 year warranty. Just connect your 12V DC power source or battery (not included) & you’re prepared to prospect.
I ordered a Gold Miner Spiral panner. I received a Desert Fox machine. I don t have real complaint as the features of the two are nearly same. I have used the machine and it works as advertised. I like the design of the spiral wheel shown on the Gold Miner a bit better than the Desert Fox wheel but all in all I’m happy with the performance of the machine I received.
The spiral panning machine is easy to set up and to operate. The intructions were detail without being too much and easy to follow. The angle tool was useful to be sure the pan was in the right position. One thing to make sure of is that you place the machine on a level surface. It does the job of separating gold from the black sand and other unwanted materials.
This makes gold prospecting so easy, it does all the panning for you. Easy to set up and use. Greatly suggested.
SE GP2-9 SET 9-Piece Set of Patented Stackable 13-1/4" Sifting Pans vs 1-V_TGP-001
Use this 5-part Set of Patented 13-¼” Stackable Sifting Pans at home, at work, or on your next adventure Our 9-part set will include the following: • Wire thickness: 0. 10 mm—Mesh size: 1/100″ • Wire thickness: 0. 14 mm—Mesh size: 1/70″ • Wire thickness: 0. 17 mm—Mesh size: 1/50″ • Wire thickness: 0. 30 mm—Mesh size: 1/30″ • Wire thickness: 0. 35 mm—Mesh size: 1/20″ • Wire thickness: 0. 45 mm—Mesh size: 1/12″ • Wire thickness: 0. 60 mm—Mesh size: 1/8″ • Wire thickness: 0. 95 mm—Mesh size: 1/4″ • Wire thickness: 1. 40 mm—Mesh size: 1/2″ Why use our Sifting Pans (AKA classifiers/sieves)? • category is the most important step in gold recuperation. • Screen off big, worthless gravel and rock. • Size your material to the correct dimensions of the gold you’re expecting to recover. • Our high quality stainless steel wire mesh is both correct and lasting for everyday use. • The plastic is both lightweight and lasting. Benefits of our stackable design: • Resting the pans over each other takes up less space. • The differently sized mesh screens make classifying faster. • Each pan fits perfectly over a 5-gallon can. Patent Numbers: United States: D666086 China: 201230049676. 1 Canada: 146123 Important: Avoid to get counterfeit things. Real SE merchandise come with our SE logo on the packaging. SE is dedicated to the buyer with the best source for value possible. You’ll enjoy the quality, function and usefulness this 9-part Set of Patented 13-1/4” Stackable Sifting Pans has to offer. SE is a registered trademark protected by US Trademark Law.
DetectorPro Gray Ghost BT Bluetooth Metal Detector Headphones Easily Answer Cell Phone Call
Has this ever happened to you? you are out metal detecting and you’re wearing a coat, gloves, backpack and maybe a hat.. You have your cell phone in your pocket secured so you do not lose it.. You are concentrating on your swinging when it happens.. You think you hear your phone or was it a vibration in your pocket? The next thing you do is rip your gloves off, pull headphones off your head and scramble to lay the detector, backpack and headphones on the ground. Then you attempt to swiftly get the phone out of the secure pocket.. By the time you have done all this you missed the call.. Oh well We at DetectorPro now have a solution.. Gray Ghost BT headphones. We have paired up our headphones with a Bluetooth receiver Now you may be able to hear that call come through in your headphones without all the fumbling By pushing a single button on the side of the receiver, you may be able to now answer your phone stress-free and take the call easily rotating volume control with “stay put” segmented “click” positioning. Selector switch for metal detector compatibility without adapters. Heavy-responsibility muff-to-muff connection cable. Heavy-responsibility coiled cable. Compact carry and storage foldable design. Heavy-responsibility polymer muffs with full-ear surround soft cushions. Adjustable padded headband.. No screws, no wire frame, no rust Speakers intended for maximum sensitivity, efficiency, durability, and signal quality. Special sound-blocking muff design eliminating environmental ambient sound up to 29 decibels. Blockage: 150 ohms nominal Land use headphones supported by a restricted lifetime warranty.
Garrett Metal Detector Accessory 5 Pack – Camo Soft Case + Digger’s Pouch + Backpack + Edge Digger + Sand Scoop
Soft Case, common Detector Digital camouflage Padded travel/storage bag, 50″ length with full zipper opening, carrying handle and backpack straps. Stow and go-Holds any current Garrett detector without removing the search coil Five velcro pouches to hold spare searchcoils, a Pro-Pointer, manual, recuperation tools, gloves, etc. Garrett All-function Backpack roughly 21″ interior height x 13″ width. Will hold a disassembled Garrett metal detector. Will include: adjustable straps; zippered front accessory pocket; interior searchcoil pouch; pair of side pouches to hold drinks. GarrettTM Edge Digger (7. 5″ digging blade; 12″ total length) Strong carbon steel blade with cutting edge teeth. Non-slip blade guard with comfy rubber handle. Will include Garrett carry sheath for belt mount use. Camo Digger’s Pouch 10″ deep zippered treasure bag Interior zippered treasure pocket to separate treasure from trash outside MOLLE-type webbing grid is ideal for attaching a PRO-POINTER, digging tools. Secures with own belt, ideal for water hunting Belt fits up to 48 inch waist Garrett Galv Metal Sand Scoop.
Rock Crusher and Mortar Combo Kit vs 1V_TGP-001
This is a complete set with the pneumatic rock crusher and the mortar. Rock Crusher Details: 7. 75" x 2" with a. 400" outside diameter end that mounts in hammer. This air hammer attachment is custom made for the modern day gold prospector or miner. Fits in the average hand held pneumatic air hammer (exactly intended for use with the inexpensive Kobalt Model # SGY-AIR132 air hammer). Pulverizes hard quartz easily. Stands up to abuse of crushing hard rock. Makes sampling ore a part of cake. Will crush rock below a 60 mesh in seconds. Takes the work out of crushing rock before panning, processing, or chemical or fire assaying. Heavy and rugged. Requires little effort for anybody to crush hard rock. Mortar Details 6" tall by 6" inside diameter (6. 5" OSD), 1/4" thick steel pipe with 1/4" heavy responsibility welded bottom. Weld is on the outside of the mortar. Mortar is painted black on the outside only to prevent rusting throughout handling (not painted on the inside, expect some surface rust, which won’t influence rock crushing. ).
CORS Shrew 6.5"x3.5” DD Search Coil for Minelab Sovereign Metal Detector
CORS Shrew Search Coil for Minelab Sovereign Metal Detector The Search Coil used by Professionals and Serious Detectorists The CORS Shrew Search Coil is intended to search on land heavily littered with iron and other debris. The form of the coil helps to separate nonferrous metal from iron. This coil is light and has excellent maneuverability, it’s suggested for use on the beach, foundations of destroyed buildings, attics, wells and tunnels. This coil has good sensitivity to big, medium and particularly small targets. The CORS Shrew Search Coil is easy to use and is good at pinpointing targets. The coil is completely submersible, the coil body is filled with high quality epoxy resin.
Fisher F75 LTD BLACK Metal Detector Bundle with Boost and Cache Process + NEW Leading Edge Technology Includes 2 Coils, Coil Covers, Backpack, Recover
Increase procedure considerably increases depth under most conditions. Cache Locating procedure is intended to find big deep objects. Lightest and best balanced of all high-performance metal detectors; Best Ergonomics in the business Powerful Performance Trigger-Actuated Target Pinpointing with Variable Audio Pitch big LCD Screen with 0-99 Numeric Target Identification Display Double-Filter unfairness Modes for Searching in Trashy regions Magnetic Mineralization Bar Graph and Readout Trigger-Actuated FASTGRAB Ground Balance Manual Ground Cancellation choice Non-unstable Memory Saves Settings Backlight For Low Light Hunting Conditions Low Operating Cost usually 40+ Hours with 4-AA Alkaline Batteries 11 DD and 5 DD Waterproof Searchcoils included plans Operating Frequency: nominal 13 kHz, quartz crystal timing reference 13158Hz, 13100Hz, 1043Hz, 12987Hz, 12931Hz, 12876Hz, 12821Hz Basic Sensitivity: 6 x 10 9 root Hertz (detectivity) Lag Coefficient: 78 milliseconds Reactive Overload: roughly 10,000 micro-cgs units (volume vulnerability) 40,000 micro-cgs units with sensitivity < 30. Resistive Overload: roughly 1,200 micro-cgs units (volume vulnerability) 4,800 micro-cgs units with sensitivity < 30. Ground complementary Range: From ferrite to salt, inclusive unfairness Ground Suppression: mix of second and 3rd order techniques ID Ground Suppression: 3rd order Battery Life: usually 40 hours with high quality alkaline batteries Estimated 80 hours with nickel oxyhydroxide batteries Estimated 65 hours with lithium iron disulfide batteries Operating Temp Range: 4 to +122 degrees F (-20 to +50 degrees C) Operating Humidity Range: 0-90 non-condensing.
Bounter Hunter CBAG-W Bounty Carry Bag
Protects your Bounty Hunter metal detector from the elements, while in storage, and in transit. Made of rugged double-stitched nylon construction, custom tailored to accommodate the Bounty Hunter S-rod configuration. Will include useful outside zip-pocket for extra batteries or small accessories, and the bright Bounty Hunter logo emblazoned on the side. A must-have item for the active detectorist.
Coiltek 15" All Terrain Search Coil (Minelab Sovereign Series)
The 15” great Orange Thing (or WOT) All Terrain Coil by Coiltek is a hard performer that works great when paired with the Minelab Sovereign Series metal detectors. With its bigger size, depth performance increases of up to 30 have been achieved when using this coil. Caused by its size, the 15” WOT All Terrain Coil is ideal for use in open terrain regions like beaches and fields, and is best used gradually to maximize the coil’s superior coverage. Comes with cable and fitted skid plate.
Vibra-Probe 580 PinPointer
The only pinpointer with tip only detection, so you know exactly where the target is. No push button switches. The Vibra-Probe uses our distinctive tilt on & off technology, also to our conventional one-minute auto-off battery saver. This translates into faster recuperation times and longer battery life.
Garrett 5"x8" Proformance Metal Detector DD Search Coil for GTI-2500
The Submersible 5 X 8" DD PROformance Searchcoil is intended for working in tight spaces, working through rocks and in trashy regions and is sensitive to small pieces of gold. This coil can considerably increase your chances of finding gold in the highest mineralized soils. Not only is this coil perfect for the prospector but it equals in its capability to find coin, relics, rings, jewelry in all soils as well as beaches. Works with Garrett GTI 2500.
Garrett 5" x 8" DD PROformance Searchcoil for ACE Series Detector with Cover
This coil is made for use with the Garrett ACE series metal detectors. This is the smallest DD in the Ace series of coils. This DD PROformance Search Coil is perfect for locating small objects. Now you may be able to easily pinpoint your targets at average depth. The Garrett PROformance DD 5″ x 8″ search coil is excellent for hunting in greatly mineralized regions like salt water beaches. The small size of this coil is perfect for locating small targets. The Double D coil winding produces smooth operation in the toughest ground conditions. The small size gives powerful target detection and easy pinpointing.
RTG Pro Aluminum 6" x 11" Water Scoop with 5/8" Holes RTGBB6
RTG Pro Aluminum 6″ x 11″ Water Scoop with 5/8″ Holes and Rubber Handle Grip. This lightweight, lasting sand scoop is ideal for metal detecting on the beach Here is our 6″ aluminum water scoop. It’s a lightweight shallow water and beach scoop. The aluminum can has 5/8″ diameter holes punched into the sides and the back of the scoop. The can of the sand scoop is 6 ” in diameter by 11″ long. The aluminum 1-1/4″ diameter handle is welded at a 20 degree angle so you may be able to use your foot on the back of this scoop to push it into the sand. There’s a T-top strengthened aluminum brace to give this scoop added durability. The handle is 40″ long making the in general length of this scoop roughly 48″. The handle has a rubber hand grip for comfort. Made in the U. S. A. By Reilly’s Treasured Gold. Give this one a attempt; you’ll really like its lightness and durability This is an excellent choice for a long handle scoop. We offer a 90 day restricted warranty against manufacturing defects on this scoop. This scoop weighs 4 pounds. Stock photo, handle grip color may differ.
- Glass Vials, 1 Dram, Pack of 12
- SE GP2-5 SET 5-Piece Set of Patented 13-1/4″ Stackable Sifting Pans
- SE PM6550 Magnetic Separator Pickup Tool with Quick Release
- Stansport Snuffer Bottle, 4-Ounce
- Lyra’s Alaskan Gold Panning Paydirt
- 2 lb. “Picker Bag” Gold Panning Paydirt Loaded With Pickers & Small Gold Nuggets
- Garrett Gold Pan Kit
- 6″ Mini Power Sluice & Set Up Kit – Gold Mining Equipment