April 21, 2017

Some info regarding SFL618 3-in-1 (NuMax)




Nov 20th 2017
Don’t order yet
Check price:




best price

Graphs

How NuMax SFL618’s price changed over last several months:
You can see the trends in SFL618 cost change
Flooring Pneumatic 3-in-1 reviews compared with other similar products:
Here you can see 3-in-1 Flooring Pneumatic as compared to other products

Info

Features:

  • Enter your model number above to make sure this fits.
  • Uses staples, T-Cleats, and L-Cleats
  • White Rubber Mallet
  • 1 Year Warranty
  • Hardened Driver Blade
  • Interchangeable Base Plates
Other Info for this deal:

Warranty: standard manufacturer’s warranty
S&H: Free shipping if ordered online
Dimensions and weight: check our reviews
Coupon/Sale: n/a


General description

Will include 3-in-1 15. 5/16-Gauge 2 in. Flooring Nailer/Stapler – SFL618.


Recent reviews of NuMax SFL618 3-in-1 Pneumatic Flooring Stapler/Nailer with White Rubber Mallet:

I bought this to do 400+ sqft of flooring and didn’t want to rent a tool. At this price it was an easy choice to purchase vs. Rent. The tool has worked well. I used the oil it came with in the air intake as you usually could to oil an air tool. So I did experience a couple of jams early and quickly realized that plunger shaft wasn’t popping back up as easily as it should because there was paint oversprayed onto the shaft. I squirted some oil onto the plunger shaft and never had another jamb. If you purchase this tool I propose you drop some oil on the outside of the plunger shaft before using it and you’ll be happy.



Our carpets were to get ratty so we decided to lay about 700 sqft of 3/4″ Oak hardwood after ripping the carpet out. Now, I have never laid hardwood or used a pneumatic nailer before but I’m the sort that does the research and plunges in feet 1st. The nailer seemed well built with a good amount of heft. Included are an extra shoe for 1/2″ flooring, hex key, handle and a wrench for tightening the handle to the nailer. I have run through about 3 boxes (3000) of nails and have not had one misfire, except for the sporadic user error. I did learn through experience and comments from other users to: Oil the plunger before 1st use and again after every 1000 nails (Thanks Caliguy) Put 3-4 drops of oil in the air inlet every 300 nails or so.



Excellent. Installing approxiamately 1500sq ft of tigerwood bamboo flooring and the NuMax SFL618BR 3-in-1 Flooring Stapler/Nailer with White Rubber Mallet was flawless far. We’re about halfway done and no problems. Excellent product.




Compare with similar products:

Ramsond RMM4 2-in-1 Air Hardwood Cleat Nailer and Stapler Gun

Ramsond has quickly become a SFL618 recognized name for the quality and durability of its merchandise. The Ramsond RMM4 2-IN-1 flooring stapler & cleat nailer mix is another testament to the recognition that Ramsond tools now enjoy. With over 30,000 units sold in North America, the RAMSOND (R) RMM4, patented mix 2-in-1 hardwood cleat nailer and stapler is an engineering marvel. It shoots both cleat nails and staples. It shoots 15. 5 and 16 gauge staples ranging from 1 to 2 inches, and “L” cleat ranging from 1-1/2″ to 2″. The 2-in-1 magazine has a capacity of 100 staples/cleats. It’s greatly lasting and freelancer/industrial quality, still light weight and agile. The body of this gun is constructed of lasting die-cast alloy for job site durability and low weight. It comes with another-large composite non-marring base plate for extra stability and protection against scratches to the flooring surface. It gives a conveniently long reach handle with an super-padded padded grip for balance and best operating comfort, stability and safety. Internally, the driver blade is constructed of a tough heat treated and hardened steel. The composite base plate intended to let the user to drive fasteners much faster and closer to the wall while defending the flooring surface from marring. This ergonomically intended multifunctional tool is made under the rigorous ISO terms for quality control. With almost 30,000 sold, this product became a symbol for dependability and durability.


Freeman PF18GLCN 18-Gauge Cleat Nailer for Bamboo and Exotic

The Freeman 18ga L Cleat Flooring Nailer offers an cheap solution for the professional and do-it-yourselfer for installation of hardwood floors like Bamboo, Teak and other exotic woods. The drive blade is made of hardened steel with an aluminum cylinder and high-quality rubber O-rings. The body of the nailer is constructed of die-cast aluminum to stand up to the task of daily use. Generic L Cleats can be used with this model, but Freeman L Cleats are suggested. This nailer comes with 3 different sized base plates that supply stability and will protect the surface from scratches. Oil, wrenches, fiberglass mallet with a white, no-mar head, and user manual are included, supported by Freeman”s 7 year restricted maker”s warranty.


Powernail 50P -Actuated Nailer

The Powernailer 50P is intended to bring Powernail quality to a Pneumatic Nailer suited for use on thinner hard tongue and groove hardwood also as for the denser hardwoods available in today’s market place. The use of 18 gauge Powercleats gives a strong and lasting Powercleat needed to penetrate these densities and supply a dependable bond to the underlayment.


Freeman PFL618BR Nailer vs SFL-618

Freeman PFL618BR Features: -3-in-1 Flooring gun with hard case. -Anodized aluminum magazine. -Air filter / anti dust cap. -One part driver blade. -Interchangeable face plates. -White rubber mallet. -lasting plastic case. -Oil, goggles and wrenches included. -3-in-1 design fastening system. -7 Year restricted warranty. -Dimensions: 22. 75″ H x 16. 75″ W x 3. 5″ D. Plans: -Fastener gauge: 15. 5 (staples) 16 (cleats). -Fastener range: 1. 5″ – 2″ and 0. 25″ crown staples from 1. 5 – 2″. -Operating pressure: 70 – 115 psi. -Magazine capacity: 100 – 120 pcs.


Porta-Nails 470 Portamatic TL Hardwood Floor Nailer

Drives both T L shaped cleat nails on 12 in. And 34 in. Tongue and groove hardwood flooring. An onboard safety trigger assures safety and exact nail placement. This new breed of flooring nailer is intended for superior versatility performance and comfort. Features. Magazine Capacity – 150. Operating Pressure – 70-90psi. Fastener plans – Drives 16 GA T or L shaped Porta-Nails in 2 in. 1-12 in. And 1-316 in. Lengths. Will include – Heavy responsibility blow molded carrying case Rubber mallet Wrenches Tool oil Safety glasses extra shoe for installing 12 in. Flooring. Dimension – 28. 5 x 25 x 4. 5 in. Item Weight – 15 lbs.


3 PLUS HFSNSP 2-in-1 Nailer/Stapler

This 3 PLUS HFSNSP tool is a 2 in 1 tool that can shoot both 15-1/2 gauge staples and 16 gauge L cleats with the same tool and magazine. You may be able to complete your project with this one tool proficiently. It equipped with a convenient long reach handle with a padded grip. You could also remove the long reach handle and use the short one as you like, which is grip padded. The kit also will include a set of flooring plates to help match different sizes of floorings. It’s a perfect decide for freelancers and residentials to finish the flooring installation job. The tool goes with two shoe plates. 1/4″ shoe plate for 3/4″ thick hardwood flooring; 5/16″ shoe plate for 1/2″ thick hardwood flooring.


Nailer Wood Floor Cleat Pneu

Requires a single strike to drive fastener. Strong, lightweight, die-cast aluminum housing. Mallet-actuated firing at the same time sets floor boards (tongue into groove) and drives cleat nail at an ideal 45 deg (degree) angle. Non-marring base lets user to drive cleat nails close to wall and changes between 1/2″ and 3/4″ flooring without the use of tools. Safety trigger prevents accidental ejection of fasteners. Extra-long ergonomic handle decreases the amount the operator has to bend over. Angled air fitting keeps hose from interfering with magazine or operator. Rear load magazine. Will include mallet, oil, wrenches and 1/4″ air fitting. No. 8D0001N: Fastener Type: Mylar Taped Strip L Cleat, Fastener Size: 1-1/2″ to 2″, Magazine Capacity: 107 Nails, Operating Pressure: 90 – 110 psi, Air Inlet: 1/4″ NPT, Tool Weight: 10. 1 lb, Pkg Qty: 1, Package Type: Box.


18GA Nailer

The Primatech EXPERT Pneumatic 550 nailer is intended for the installation of 3/8″ to 3/4″ hard or Engineered hardwood floors, as well as many of the Bamboo and other Exotic species. It uses Primatech 18gage L nails available in lengths of 1-3/4″, 1-1/2″ and 1-1/4″ (120 nail capacity). Tools in the EXPERT-series are Primpact Powered for greater speed and precision. Its striking cap design enables the operator to get closer until the end wall than any other tool. The Primpact modular assembly lets easy access to all parts; where a broken driver may be replaced on-site inside 60 seconds. The 550 completely adjustable base plate 1st sets against the front of the tongue, decreasing the risk of damaging the top edge of the flooring. Its cam system gives infinite modification to exactly position the nail into the nail pocket of the board.


Porta-Nails 418A Portamatic Evolution 18 Gauge Nailer

Uses 18ga L nails; Cam operated height modification; Compact power head operates on 80-90 PSI; Lower profile gets closer to wall; fast access to the valve and major piston; Protects prefinished floors; Safety is built into the base of the tool; Uses 1 1/4″ to 1 3/4″ fasteners; 18ga nail decreases the risk of splitting exotic or engineered floors; For 3/8″ – 3/4″ hard wood, 15mm bamboo, and 1/2″ -3/4″ engineered flooring.


Professional Woodworker 7560 18 Gauge Nailer

7560 Features: -Nailer. -Easily changes to a regular stapler with a front accessory. -Gate clip system lets to easily clear a jam. -Drives fasteners at a 45 degree angle every time. -Comes with gun oil, allen keys and a male plug. -Magazine capacity of 100 fasteners. Kind of Nailer: -Flooring Nailers. Kind of Fastener: -Headless Pins. Fastener Size Range: -. 5″ – 1. 25″. Fastener Gauge: -18. Dimensions: -2. 15” H x 15. 85” W x 20. 6” D. In general Height – Top to Bottom: -2. 15″. In general Width – Side to Side: -15. 85″. In general Product Weight: -5. 8 lbs.


LSN3 LOTOS 2-in-1 Air Hardwood Cleat Nailer and Stapler Gun (Special deal by the end of this week)

Good News: NOW this Nailer come with the “Modeled Grey Carrying Case ” The Lotos 2-in-1 Flooring Nailer and Cleat Stapler is an essential flooring tool that’s made to be both easy-to-use and lasting. Professional flooring installers favor to use this Nailer and Stapler to meet their flooring needs. The result of engineering excellence, the 2-in-1 hardwood cleat nailer and stapler shoots both cleat nails and staples without needing to change magazines. This tool shoots both 15. 5- and 16-gauge staples ranging from 1 to 2 inches and “L” cleats ranging from 1-1/2″ to 2″; both are held in a magazine able of holding up to 100 staples or cleats. The standard-sized staples and cleats are easily obtainable from any hardwood store. The body of the gun, constructed from die-cast alloy, is both lasting and lightweight, meeting the needs of freelancers and industrial businesses. Adding stability, another-large composite non-marring base plate can be used to protect the flooring from scratching also as allowing the user to drive fasteners faster and closer to the wall. This Nailer and Stapler is of the highest quality and guarantees a better flooring experience.


Freeman PDX50Q Nailer and Stapler the first industrial quick release

This Freeman 3-in1 fast Release Flooring nailer is the 1st of its type featuring a tool-free fast release latch that lets you to clear nail jams quickly and proficiently, saving time and annoyance in the center of a job. Equipped with an expanded handle and padded grip to decrease user exhaustion and considerably increase control over the nailer, the PDX50Q is an ideal choice for your hard hardwood flooring needs. This nailer is perfect for anybody who wants professional quality at an cheap price, buying the PDX50Q proves a tremendous value over the expensive choice of renting a flooring nailer, affording you the capability to work on your timeframe. Internally the driver blade is constructed of a tough heat treated one part hardened steel, anodized aluminum magazine and utilizes T-Cleats, L-Cleats and flooring staples. This flooring gun may be used on all types of hard tongue and groove hardwood flooring as well as cherry, oak, maple, walnut, etc. The PDX50Q comes with a convenient long reach fiberglass handle mallet with a padded grip and non-marring bumper. Freeman Nailers are made under rigorous terms and are supported by our 7-year warranty.



What people considered before buying it:
  1. BOSTITCH FLN-200 2-Inch Flooring L-Nail, 1000-Per Box
  2. Porta-Nail 42620 Flooring Nail/Staple Setting Tool
  3. Porta-Nails 4702 16 Gauge 2-Inch Flooring Nails (1,000 per Box)
  4. BOSTITCH BCS1516-1M 15-1/2-Gauge 2-Inch Hardwood Flooring Staples
  5. 2 PACK BOSTITCH FLN-200 2-Inch Flooring L-Nail, 1000-Per Box
  6. Freeman PFBC940 4-in-1 Mini Flooring Nailer/Stapler using 1 5/8-Inch 18 Gauge Nails or Staplers


Models to consider:
EF18GLCN 550AMFN-201 PDX50CRMM4 1840AFS
UMFN201 DWFP12569PF18GLCN LSN3HDUFL50 GR200LCN
PFBC940 PDX50Q8D0001N PFL618BR418A 465SLT
2000KIT SHF50
EF18GLCN 465SLTHDUFL50 LSN3PDX50Q GR200LCN
SHF50 UMFN201418A 550ADWFP12569 2000KIT
PFL618BR MFN-201RMM4 PFBC940PF18GLCN PDX50C
1840AFS 8D0001N
SHF50 8D0001NLSN3 PDX50CPFL618BR RMM4
EF18GLCN 418A550A HDUFL50PDX50Q 465SLT
PF18GLCN DWFP12569PFBC940 GR200LCN2000KIT MFN-201
UMFN201 1840AFS

Subscribe

Subscribe to SFL618 best prices tracker for your city/stores

Select area


Select Store


Product Versions:


Email: