Quick facts about Tools VDV501-826 (Klein)
Warranty: standard manufacturer’s warranty
S&H: Free shipping if ordered online
Dimensions and weight: check our reviews
Kit will include: 1 Scout Pro 2 Tester, 1 self-storing Test-n-Map Remote, 7 Test-n-Map Remotes, 1 coax barrel F adapter, 8 Coax push-on F adapters, 8 RJ45 jumper test cables, 1 carrying case, manual and 9V battery. The kit also supports up to 19 LanMap or CoaxMap place Remotes to recognize cable runs (sold individually). Other features are: voltage warning, shield detection, auto power off, low battery display and a self-storing remote. Carrying Case has custom-intended compartments to hold tester and accessories securely. Optional Accessory: VDV726-125 (common RJ11/RJ12 Jumper Cable for Test-n-Map Remotes).
This tool is excellent. There are two enhancements I could see here although. It should have the capability to send a tone down the connected cabling. (This model doesn’t as they keep it a separate SKU). #2, I wish the cat-5 tester’s went beyond 8 at a time. I could love it to go higher. I know you may be able to buy (which I did) the cat-5 end’s that go to twenty for line identification, however those don’t test pairs. My complaint about the kit, is that it has a space for the wand which does not work with this unit, effectively taking up space. Id rather see this kit with pluckable bubble so I can customize it for my personal needs.
This is a great addition to the IT toolkit, much better than what we had earlier. My Level 1 tech can not wait for me to have him check a patch panel full of punchdowns and relabel all the offices (again). Easy to use, case is perfect.
Great tool. Use this every day. A little costly for what it does, however way better quality than alike tools. Well worth the expense.
87813 Fall-Arrest/Positioning Harness, X-Large
The Klein 87813-Fall-capture/Positioning Harness is VDV501-826 intended to capture free falls and distribute affect forces over thighs, pelvis, chest, and shoulders as obliged by OSHA. The permanently attached waist belt can conveniently hold slotted and tunnel-loop pouches and holders. The 3-Inch Softee waist pad is made of non-abrasive nylon and gives extra comfort throughout prolonged use. Belt adjuster pads supply superior fit and increased comfort for better tool weight distribution. The harness is constructed of lasting 1-3/4-Inch type 13, or equivalent, nylon webbing. Easy-connect chest and leg buckles with friction-slide adjuster let for fast engagement/disengagement. The waist belt features a tongue buckle and grommets for a comfy fit and positive buckle connection. The 87813-extra-big harness has a waist size range of 44-Inch to 52-Inch. Friction slide adjusters hold shoulder straps in place so the user doesn’t have to readjust for each use. Color contrasting shoulder and leg straps change putting the harness on. The 87813-fall-capture/positioning harness incorporates drop-forged circle D-rings and two drop-forged positioning circle D-rings that feature a corrosion-tolerant finish, wear-minimizing roller, and are evidence-loaded to meet OSHA rules. Seat strap adds extra comfort and support. Identity and warning tags and/or labels are reminders of correct application and inspection procedures. The Klein name, model, date of make and OPE-system application symbol(s) are permanently and obviously inscribed on these tags and labels. Harnesses are certified and compliant with ANSI and CSA prerequisites. Since 1857, Klein Tools has made the world’s finest hand tools. Today, Klein Tools is the No. 1-choice among professional tradesmen. We make more than 3,000 high-quality merchandise. Klein Tools’ dedication to quality and novelty continues with merchandise available for professional tradesmen global.
63336 36-Inch Bo Cutter – Steel Hles
409-63336 Features: -All function, center-cut jaws. -Precision ground steel jaws. -Lockplate reinforcement prevents jaw bolts from loosening, keeps jaws in correct alignment. -Cuts soft, medium, and hard metals. -1-modification realigns cutting edges. -3-point toggle joint multiplies 50 lbs of hand pressure on handles to 4,000 lbs on jaws. -Cutting Direction: Straight. -Cut Type: Center Cut. -Jaw Material: Forged Alloy Steel. -Handle Type: Straight. -system: Toggle Joints. -Type: screw Cutter.
CN1986ARL Pole Climbers with 1-9/16-Inch Gaffs-Complete Set
Pole Climbers with 1-9/16″ Gaffs Complete Set have 8″ x 8″ (203 x 203 mm) padded, high-grade leather climber pads for maximum comfort with neoprene-impregnated nylon climber straps for long-lasting life. They also feature secure sleeve and leg iron connection and two slotted hex-head bolts with lock washers and barrel-type nuts join the steel sleeve and leg iron together. The steel split ring secures the ankle strap in place and lets for fast substitute. They feature a 4-7/16″ (113 mm) large stirrup that gives greater foot support and an adjustable climber length steel sleeve moves in 1/4″ (6 mm) increments for the most comfy fit. The contoured leg irons help position gaffs securely and comfortably and the replaceable gaff firmly attaches to the leg iron with a center pin and two TORX screws. The gaffs are longer in length and wider in angle than 1-1/2″ gaffs for exceptional resistance to cutouts. To find out size needed, measure from instep to 1″ (25 mm) below knee. Sold in pairs only.
5111 Single-Pocket Leather Tool Pouch vs VDV-501-826
409-5111 Features: -Material: Leather. -Perfect for carrying pliers and other tools in the hip pocket. -Riveted to guarantee long life. Product Type: -Tool pouch. Outside Material: -Leather. Pockets Included: -Yes. Country of make: -United States. Dimensions: in general Height – Top to Bottom: -7″. In general Width – Side to Side: -4. 5″.
500-18 18-Inch Stard Capacity Adjustable Wrench
The Klein 500-18 Standard Capacity 18-1/4-Inch Adjustable Wrench has precision-machined jaws that are individually chosen and assembled by hand for smooth operation. The wrench is finished in a high polished chrome and is heat-treated for long life. The 500-18 2-1/16-Inch capacity wrench is forged with heat-treated alloy steel for maximum strength and light weight, and is chrome-plated for rust resistance. The knurl turns smoothly for easy operation, while the tapered handle is contoured for comfy use. The rail is ground for precision fit. Available in high-capacity. Since 1857, Klein Tools has made the world’s finest hand tools. Today, Klein Tools is the No. 1 choice among professional tradesmen. We make more than 3,000 tools and accessories, as well as pliers, cable and screw cutters, wire strippers, voice-data-video tools and testers, fish tapes, conduit benders, drill bits, insulated tools, gloves and many other high-quality merchandise. Klein Tools’ dedication to quality and novelty continues with merchandise available for professional tradesmen global.
70570 Grip-It Hex-Key Sets with 5-Inch Sizes, Yellow
KLN70570 Features: -Hex-Key Sets. -Blades rotate independently up to 270. -Precision fit so hex tool end decreases stripping problems. Keys are industrial strength, affect-tolerant and tested for performance to below freezing. -Glass-strengthened nylon handle. Dimensions: in general Product Weight: -0. 55 Pounds.
Kit will include: 1 Scout Pro 2 Tester, 1 self-storing Test-n-Map Remote, 7 Test-n-Map Remotes, 1 coax barrel F adapter, 8 Coax push-on F adapters, 8 RJ45 jumper test cables, 1 carrying case, manual and 9V battery. Other features are: voltage warning, shield detection, auto power off, low battery display and a self-storing remote. The kit also supports up to 19 LanMap or CoaxMap place Remotes to recognize cable runs (sold individually).
MM1000 Electrician’s Muimeter
Bar graph responds quickly to changes in measurement. True RMS. Max/Min/Relative reading for fast troubleshooting in the field. Amps: 10. 00A AC/DC. Voltage: 0. 00 VAC , 0. 00 VDC , 1000. 00 VAC , 1000. 00 VDC. Frequency: 1. 0 MHz. Display Type: LCD. Length: 7″. Height: 1 7/8″. Width: 3 1/2″. Power Source: Battery. Conductor Resistance: 40. 00 Ohm.
Puit SE75P-CR0 Braided Expable Sleeving, 100-Feet, Black
Gives uninterrupted attrition resistance for wires cables and tubing. Lightweight lasting protection. Greatly adaptable open weave won’t trap heat or humidity. Rated for use up to 257 Degree Fahrenheit (125 Degree Celsius). All PET is naturally UV tolerant; colors may fade with contact. Lets for use with irregular shapes. Stock colors: Black, gray and white. Panduit is a world-class maker dedicated to novelty and excellence. Today, Panduit is distinguished as a leading maker of high-quality merchandise for wiring and communications applications. This repute gives the company a powerful advantage in today’s competitive global marketplace.
545M Tool Be with Quick-Release Buckle, Cotton/Polyester Blend
5425M Style: Size Group:Medium, Len. :33″, 44″ This item features: -Drop forged fast-release buckle. -Mildew-tolerant blend of cotton/polyester. -Worn over users clothes and harness. -For emergency situation where the wearer has to swiftly disengage the belt. -Material: Cotton/Polyester. -Type: fast Release Belt. -Price is for 1 Each.
CN1907ARL Tree Climbers with -3/4-Inch Gaffs-Complete Set
Tree Climbers with 2-3/4″ Gaffs Complete Set have 8″ x 8″ (203 x 203 mm) padded, high-grade leather climber pads for maximum comfort with neoprene-impregnated nylon climber straps for long-lasting life. They also feature secure sleeve and leg iron connection and two slotted hex-head bolts with lock washers and barrel-type nuts join the steel sleeve and leg iron together. The steel split ring secures the ankle strap in place and lets for fast substitute. They feature a 4-7/16″ (113 mm) large stirrup that gives greater foot support and an adjustable climber length steel sleeve moves in 1/4″ (6 mm) increments for the most comfy fit. The contoured leg irons help position gaffs securely and comfortably and the replaceable gaff firmly attaches to the leg iron with a center pin and two TORX screws. They have extra-long gaffs for maximum penetration when climbing trees. To find out size needed, measure from instep to 1″ (25 mm) below knee. Sold in pairs only.
31758-15 1-Inch, 6 TPI Recicating Saw Blade for Wood with Nails, 15-Pack
The Klein 31758-15 Bi-Metal Reciprocating Saw Blade for wood with nails is 12-Inch long, 3/4-Inch large, 0. 050-Inch thick, and has 6 teeth per inch. The bi-metal blades feature shock-tolerant teeth that resist strip page, and the 1/2-Inch common shank fits all well-liked reciprocating saw tools. Pack of 15.
- Klein Tools VDV500-060 PROBEplus Tone Tracing Probe
- Klein Tools VDV500-808 TONEcube & PROBEplus Kit with Pouch
- Klein Tools VDV526-055 LanMap Kit for VDV Scout Pro Tester
- Klein Tools VDV226-107 Compact Ratcheting Modular Crimper
- Klein Tools VDV500-051 TONEcube Tone Generator
- Cable Matters Keystone Punch Down Stand
Models to consider:
|JTH6E11BE 55419SP-14||H4TR0000 NCVT-2||UTP16DCG KPS150-2|
|5299N26D SE50P-CR0||MM2000 CS3108A28-84P||AB-01-BK 5278N-22D|
|5139PAD JTH6M5BE||5282N-22D KP-HSTT1||VDV526-055 MM6000|
|XRBOX4-E-EA481 NRHD2||5456T JTH610EB||55453HSB SE75P-CR0|
|Klein 5139 JTH9M3||HFDV12D7 JTH6M4||Klein 5225 1604-20L|
|97-3102A-18-1S AHD16-9-96S||VDV501-089 97-20-19P||VDV600-096 HFA242412LP|
|5425M L-4-18ID-9-C||a15031400ux0005 5278N-27D||VDV512-057 12-003BU|
|KFV 70 KT155T||Klein 5166 KLNT-65504-01||HSTT75-C 5139B|
|1684-5AT WIERHC302408||ET200 1656-60H||5282N-26D 5299N30D|
|HFT150116G100 JTH610E||VDV526-055 CS3108A28-84P||5278N-30D MM1000|
|JTH6M5BE LH5268-23-M||JTH6M4 a15031400ux0005||NCVT-2 JTH6T20|
|55454DHB HFA483612LP||AHD16-9-96S KLE56057||JTH610EB CL1300|
|5188T 55419SP-14||LH5282-26-M MS3106E14S-6P||LL12 CN1907AR|
|M85049/51-1-18N 5282N-24D||3146A 53715SEN||1684-5AT 5282N-25D|
|D38999/24SJ8SN 5139PAD||97-416S-8P HFA36R3012HCR||H4TR0000 VDV600-096|
|HFDV12D7 VDV512-057||KLE5178 HFA24H2008GQRLP||5278N-27D 97-3102A-18-1S|
|CL101030 5704M||5278N-26D L-14-120-9-C||HSTT19-Q AB-01-BK|
|KT155T KLNT-65500-01||Klein 5156 JTH6E14||TV06RQW-23-6PA Klein 5139|
|VDV501-824 55455M||ET200 CN1907AR||5282N-24D 5278N-22D|
|VDV501-825 HSTT19-Q||AB-01-BK KP-HSTT1||JTH67T KILHFX265302|
|D38999/24SJ8SN Klein 5139||T25F-C0 H4TR0000||Klein 5225 VDV501-089|
|UTP16DCG HFT150116G100||JTH9M3 5181ORA||5139B JTH610EB|
|XRBOX4-E-EA481 LH5282-26-M||L-14-120-9-C 5299N26D||97-20-19P CL101030|
|Klein 500-24 ACMT137920||JTH6E14 KLE56057||HFA483612LP JTH6T20|
|PX0412/04P Klein 5003-18||Klein 5156 CS3108A28-84P||TV06RQW-23-6PA M85049/51-1-18N|
|VDV526-055 SE75P-CR0||UTS6JC1419S T75F-C0||KT155T 1656-60H|
|HFA242412LP MS3106E14S-6P||5425M KLE5178||JTH610E PX0412/06S|