Vises 865-DI (Yost) is a bargain at this price
- Bench vise with swivel base has a 6.5″ jaw width to grip a flat surface and provide clamping action for medium-duty applications, and has a reversible front jaw that expands the jaw opening from 7″ to 11″ for larger applications
- Ductile iron body is durable and strong for extended life, and has two flat portions that act as an anvil and additional work surface
- Top jaws are replaceable and reversible, with a serrated surface on one side for enhanced grip and a smooth side on the other for handling delicate items
- Pipe jaws are serrated for enhanced grip and can be replaced when worn
- 360-degree swivel base adjusts the direction of the jaws for proper placement and locks in place
Warranty: standard manufacturer’s warranty
S&H: Free shipping if ordered online
Dimensions and weight: check our reviews
The Yost Vises 865-DI 6. 5″ multi-function reversible mix pipe and bench vise has a 360-degree swivel base, mounts to a workbench to offer clamping action for medium-responsibility applications, and is made in USA. The reversible front jaw expands the jaw opening for bigger applications. The 360-degree swivel base changes the direction of the jaws for correct placement. Hand-tightening the two lock knobs on the base secures its position. The ductile iron body gives strength for expanded life and has two flat portions that act as an anvil and extra work surface. The hardened-steel top jaws may be reversed to display either the smooth side for fragile things or the serrated side for improved grip, and they may be replaced when worn. The hardened-steel pipe jaws are serrated for improved grip and may be replaced when worn. The jaws draw closer together or farther separately by turning the vise handle clockwise or counterclockwise. The major screw that controls the jaws was uninterrupted rolled for high strength and is covered by a bar to protect it from damage. A rubber washer on either side of the handle prevents unwanted sliding when turning, and the balls on each end unscrew to enable substitute of the handle if worn. The base has four 0. 63″-diameter holes for mounting hardware (not included). SpecificationsJaw width (nominal)6. 5″Jaw opening (nominal)7″/11″Throat depth (nominal)4″/3″Pipe capacity1/8″ to 3-1/2″in general dimensions9. 5 x 7. 5 x 20. 5 inches (H x W x D)Weight49 lb. H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Vises use the clamping action of jaws to hold a workpiece in place for applications like drilling and sawing. Vise styles are categorized by how the device is mounted. As an example, bench vises mount to a benchtop; drill press vises screw to a drill press; and woodworking vises fit underneath, on top, or to the side of a workbench. A vise’s jaw opening and throat depth should be big enough for the workpiece. Yost Vises manufactures a large range of vises, as well as bench-mount, woodworking, and drill-press styles. The company, founded in 1908, is headquartered in Holland, MI.
I just got a great new work bench from sears for Christmas. It came with a stainless steel top. So, now I wanted a bench vise to finish it off. I picked this on because I work in Afghanistan as a mechanic with the US Army and, its what they have in our shop. We haven’t been light with the vise. I have seen pipe bent in it and broken bolts removed from rusty equipment while clamped in the vise. It’s strong and, dependable. We hammer on it and hammer things that are clamped in it. We have a bigger 8" model. I bought the 6 1/2". I believe this is one of the better vises on the market today. I do not know the Army to invest into cheep stuff. And, I believe this vise will most likely last me for ever.
I’m inquiring if this was made in the US and if the steel is really 65ksi. My vice arrived with one of the 4 screw holes broken off of the base. I’ll update my review depending on return policy and the quality of my substitute.
As early as I opened the box, I knew I had a gem of a vice. I already knew it was a heavy son-of-a-gun. The machined surfaces are flawless, and I really like the 360 degree swivel. My old craftsman only swivelled about 240 degrees, and only had one lock down handle (the new one has 2). I thought I was going to miss the vertical v-notches in the major jaws, however while not as deep as on my old vise, it does have notches, on both ends. I’m still in the procedure of permanently monting the vise, so I have only played with it to check it out. I was going to give it 4 stars for that reason, however I have inspected it enough to be pretty sure it’s the finest I have ever used, and decades ago, I did work for some years in a small machine shop with some number of different vises. If my opinion changes, I’ll repost. I have a couple of projects waitng, one of which destroyed my old vise. Okay, I was the destroyer, not the project.
WoodRiver Universal vs 865-DI
Common is an excellent way 865DI of reporting this vise. The 3-1/2″ large by 2-1/8″ high jaws have a 5″ open capacity, in either a vertical or horizontal position. The faces are drilled to accept wood facings, there’s a small anvil, and the vise rotates 360 on its base, locking tight as early as an item is secured in the jaws. The handle and thread are chrome plated for durability. Screw holes in the base legs make it simple to attach the vise to a bench top.
Fancii LED Light Helpg H Magnifier Station – 2X 4X Illumated Hs Free Magnifyg Glass St Clamp Alligator Clips – For Solderg,
Versatile Helping Hand Magnifier Made with a rimless acrylic lens; intended for hobbyists and professionals like welders, electricians, and technicians. Intended For Your Home or Workshop This 2X helping hand magnifier is ideal for soldering, building models, electronic fix, DIY projects, jewelry, hobbies and crafts. While the 4X secondary spot lens adds extra zoom when you have to see more intricate details. Completely Adjustable Workstation There are two adjustable points on the neck of the unit, allowing the magnifying lens to be located at different angles and heights. Things are hold securely by the clamp and 2 alligator clips on a 4 way swivel, and the part holding the clips may be adjusted in height also. The lens may also be rotated 360 degrees. Made To Last Constructed out of scratch tolerant acrylic lens, metal, and ABS, our multifunctional helping hand magnifier is both tough and lasting. Illuminate While You Magnify Equipped with 2 super bright LED lights to offer an evenly lit looking at area under low-light conditions. The lights run on 3 AAA batteries or a USB source like a power bank or wall plugin. Plans 3. 5″ (90mm) main Lens: 2X zoom 2X lens focal length: 8″ 0. 9″ (23mm) Spot lens: 4X zoom 4X lens focal length: 2″ Adjustable neck 4-way swivel alligator clips One removable mini clamp One iron holder One metal tray Two bright LED lights obliged three AAA batteries (NOT included) may also be powered by a USB source ✔ supported by a 100 No-annoyance, RISK FREE Money Back ensure. If you aren’t totally pleased with our magnifying glass, we’ll give you a full refund. No questions asked. Click the Add to Cart Button at the Top of this Page to start improving your vision today.
Westward 10D709, Mechanics,, 8-1/4
Bench Vise, Mechanics, Jaw Width 8-1/4 In. Max. Opening 8 In. Throat Depth 4-5/8 In. Pipe Capacity 3/8 to 2-1/2 In. in general Length 17-25/32 In. in general Height 11-5/8 In. in general Width 9-27/32 In. Base Type Swivel, Rotates 360 Deg, Number of Mounting Points 4, Mounting Hole Dia. 11/16 In. Lock Down Bolts 2, Jaw Type Replaceable Serrated Top And Pipe Jaw, Construction Grey Iron, Body Casting 30,000 psi, Features mix Pipe And Bench Vise, big Anvil Surface.
SA-380 8" Alumum Jaw Caps (1 Pair)
The Yost Vises SA-380 8″ aluminum vise jaw caps attach to and cover a set of 8″-large serrated vise jaws to shield fragile work from damage and meet Federal Specification GGG-C-00137B. The caps are made of aluminum for durability, and the polished finish creates a smooth surface to prevent the clamped item from being marred. Each cap has pliable tangs that fold over the serrated vise jaw to hold the cap in place. Two jaw caps are included. Yost Vises manufactures a large range of vises, as well as bench-mount, woodworking, and drill-press styles. The company, founded in 1908, is headquartered in Holland, MI.
HFS (Tm) 5" Millg Mache Lockdown – 360 Degree g Base – Hardened Metal – CNC, Blue, Width 5", Open Length : 5".
1. Use highest quality ductile Iron 80000 PSI for minimum bending. 2. The enclosed lead screw and sliding surface are harden and ground. 3. Highest clamping power. It is correct and lasting. 4. This Vise is so intended that the horizontal force generated by tightening the handle pushes the semi-sphere inside the movable jaw and thrusts the movable jaw down. The workplace doesn’t move up, if it’s held at the top of the jaw plates. 5. Four setting positions of the jaw plates are available, widening the jaw plates opening. Model – 15986 Jaw Width – 4. 92″ Jaw Opening 4. 92″ Jaw Height – 1. 57″ Base Height – 1. 23″ Weight – 46lbs / 21kg.
Grizzly G1076 Clampg Kit for 5/8-ch T-Slots, 58-Piece
Our clamping kits are among the best in the world. All the blocks bolts nuts and hold-downs are case hardened. Each clamping kit will include: (24) studs (6) step block pairs (6) t-nuts (6) flange nuts (4) coupling nuts and (6) end hold-downs. The model g1076 set fits 5/8-Inch t-slots and will include 1/2-Inch studs. Racks may be bolted to the wall or side of machine for easy access.
– 5. Jaw Width, Model# 650-Blue Misc.
The Yost 5in. Mix Pipe and Bench Vise features an enclosed, lubricated major screw design to protect the screw from damage. Made of professional responsibility 30,000 PSI castings for long service life. Features an interlocking swivel base, big anvil and pipe jaws for versatility. Double Look-downs Yes, Jaw Capacity in. 5 1/4, Replaceable Jaw Yes, 360 Swivel Base Yes, Jaw Depth in. 3 3/4, Jaw Width in. 5, Pipe Jaw Yes. 30,000 PSI castings for extra strength and longevity big anvil work surface Vise rotates 360 and has 2 lockdowns Interlocking swivel base Enclosed, lubricated major screw design Replaceable hardened steel machinist’s top jaws Replaceable hardened steel pipe jaws Pipe jaws set back to let for machinist’s vise use Pipe jaws intended to grip pipe securely No-pinch major screw handle Continuously rolled thread on major screw strengthened bar support.
Wilton Tradesman Round Channel – 6 1/2., Mount
The Wilton Tradesman Round Channel Vise is intended to manage the most calling for clamping applications. Unlike most vises that have a fixed center nut, the Tradesman round channel vise nut is anchored at the rear. This rear-anchored nut gives straight line pull and pressure, ensuing in greater durability. This 6. 5in. Jaw width heavy-responsibility vise is ideal for tradesmen, vehicle applications, metal fabrication, service/MRO, utility work, and construction sites. Features a double lockdown replaceable jaw and 360deg swivel base. Enclosed spindle construction. Unbelievable clamping power. big anvil. 60,000 PSI body parts. One of the top industrial bench vises in the U. S. A. Made in the U. S. A. With high quality cast iron for strength and durability. Handle Length (in. ): 10 1/2, Jaw Width (in. ): 6 1/2, 360deg Swivel Base: Yes, Replaceable Jaw: Yes, Pipe Jaw: 1/4 to 3 1/2, Double Lock-Downs: Yes, Jaw Capacity (in. ): 6 1/2, Jaw Depth (in. ): 4.
KREG Automaxx Clamp Table Combo, # KCT-COMBO
The Automaxx Clamp Table Top is perfect not only for use as a pocket-hole assembly station, however also as a general hold-down while drilling, routing, sanding, and more. The 21-3/4″ x 33-3/4″ Clamp Table Top surface is melamine material, which sheds dried glue quickly. Each Automaxx Clamp Table Top will include Clamp Trak on two sides and two Automaxx Bench Clamps with 3″ throat depth, which rotate 360 on the Clamp Traks. Also included are five Clamp Blocks, which supply the capability to swiftly and precisely register the workpiece and bring the project into alignment. Each block may be oriented for face frame widths of 1-1/2″, 2″, 2-1/2″ or 3″ so frame parts may be loaded on the table and held square. Will include Automaxx Clamp Table Top and perfectly paired Multi-function Steel Stand for one amazing clamping station suited for any woodworking task. Add the optional Kreg Casters Set for convenient mobility.
445 4.5" Apprentice Series Utility 180-degree Base
The Yost Vises 445 4. 5″ Apprentice series utility mix pipe and bench vise has a 180-degree swivel base and mounts to a workbench to offer clamping action for light-responsibility applications. The 180-degree swivel base changes the direction of the jaws for correct placement. Hand-tightening the lock handle on the base secures its position. The vise has a cast iron body with steel U-channel bar for durability and has a flat part that acts as an anvil and extra work surface. The hardened steel top jaws may be replaced when worn, and the fitted cast iron pipe jaws are grooved for improved grip. The top jaws may be replaced when worn. The jaws draw closer together or farther separately by turning the vise handle clockwise or counterclockwise. A rubber washer on either side of the vise handle prevents unwanted sliding when turning. The base has four 7/16″-diameter holes for mounting hardware (not included). SpecificationsJaw width (nominal)4. 5″Jaw opening (nominal)4″Throat depth (nominal)2. 625″Pipe capacity0. 125″ to 2″in general dimensions5 x 6 x 10 inches (H x W x D)Weight17 lb. H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Yost Vises manufactures a large range of vises, as well as bench-mount, woodworking, and drill-press styles. The company, founded in 1908, is headquartered in Holland, MI.
Westward 10D706, Mechanics,, 6
Bench Vise, Mechanics, Jaw Width 6 In. Max. Opening 5-3/4 In. Throat Depth 4-1/8 In. Pipe Capacity 3/8 to 2-1/2 In. in general Length 14-31/32 In. in general Height 11-5/8 In. in general Width 9-7/16 In. Base Type Swivel, Rotates 360 Deg, Number of Mounting Points 4, Mounting Hole Dia. 11/16 In. Lock Down Bolts 2, Jaw Type Replaceable Serrated Top And Pipe Jaw, Construction Grey Iron With Anvil, Body Casting 30,000 psi, Features mix Pipe And Bench, big Anvil Surface.
7WW-DI 7" Heavy-Duty Ductile Iron Woodworker’s
The Yost Vises 7WW-DI 7″ heavy-responsibility ductile iron woodworkers vise mounts to a workbench up to 3″ thick to offer clamping action for heavy-responsibility and professional applications, meets Federal Specification GGG-V445, Type I, Class II, and is National Stock Number (NSN) 5120-00-221-1114 compliant. The ductile iron body and replaceable cast bronze alloy nut construction supply strength for expanded life. The somewhat tapered, aka toed, jaws create a hard grip and apply pressure evenly across the top and bottom of the vise. The jaws draw closer together or farther separately by turning the vise handle clockwise or counterclockwise.
- Yost Vises MR-365 6-1/2″ Magnetic Aluminum Vise Jaw Caps with Rubber Finish (1 Pair)
- Yost Vises MA-365 6-1/2″ Magnetic Aluminum Vise Jaw Caps (1 Pair)
- Nicholson Ergonomic Rubber File Handle with Inserts, 4-1/2″ Length (Pack of 1)
- Olympia Tools 38-695 2 Pack Magnetic Vise Jaw
Models to consider:
|D4082 MU-360||BV-DF6SB SA-380||G1075 SA-340|
|26 1/2C BV-4||M9WW 906-AS||D3248 910-HV|
|910-HV a09060300ux0006||10D709 SA-360||G7063 SA-350|
|TK-6 KKS1160||SA-330 BPN-123.00||SA-335 10D707|
|SA-345 7WW-DI||908-HV WIL1780A||HD CSV-4 WILWS8|
|3W766 02108X||MFV-3 880DI||11128BH SSV-0406S|
|L65WW HAV-4||2H5T0100 21500A||4-RAV PWS-6900|
|FC-MGHH35U 4YG28||6Z848 SJA300||SA-355 SA-325|
|COV-3 KKS1140||KL1821 4-RAV||AVMV-305 910-AS|
|880DI AVMV-305||PWS-6900 2H5T0100||PS130 4-RAV|
|26 1/2C 906-AS||SA-360 BV-DF6SB||SA-355 SA-345|
|SA-340 KKS1140||SA-335 HD CSV-4||HAV-4 MU-360|
|D4082 KKS1110||COV-3 7WW-DI||WIL1780A 910-HV|
|10D706 908-HV||G1075 SJA300||a09060300ux0006 PSPT1-WH01|
|KKS1160 910-AS||BV-DF5SB 10D707||3W766 910-HV|
|4-RAV SA-380||BV-4 D3248||1UH15 21500A|
|G7063 10D709||4YG28 G1076||MFV-3 FC-MGHH35U|
|WILWS8 B8250||SG5-DR 6Z848||SA-330 GTR16B6|
|G1075 910-AS||a09060300ux0006 D4082||4YG28 910-HV|
|KKS1110 COV-3||26 1/2C GTR16B6||SA-345 10D709|
|KKS1120 PWS-6900||HAV-4 SA-335||SSV-0406S KL1821|
|D3248 1UH15||TK-6 AVMV-305||880DI 02108X|
|FC-MGHH35U SA-355||KKS1140 SG5-DR||2H5T0100 WIL1780A|
|BPN-123.00 906-AS||PSPT1-WH01 BV-DF6SB||SJA300 11128BH|
|PS130 7WW-DI||M9WW SA-350||SA-380 3W766|
|4-RAV G7063||WILWS8 MFV-3||BV-DF5SB SA-360|
|10D707 MU-360||B8250 HD CSV-4||SA-340 SA-325|