HT-32B Vertical (WaterWorker) is a great value at this price
- Precharged Tank
Warranty: standard manufacturer’s warranty
S&H: Free shipping if ordered online
Dimensions and weight: check our reviews
It is a pressure tank, so hard to get too emotional here. But I was replacing a almost indentical unit from the same maker. Old tank was 30 gallons, so this was just a little taller. But I had space, so it fit in perfectly. The biggest problem in installation was that the old tank’s bladder had failed, so it was blocking the discharge pipeline inside, so most of the water could not drain out. Consequently, the tank plus water was heavy and I had to use a tractor to lift the old tank out of a wellpit. But that was the old tank, not the new. Only negative comment I have is the old tank (same maker) was barely 9 years old. I thought it should have lasted a little longer. But I could not complain about the price. At least 50 cheaper than purchasing it locally; and free shipping.
I received this today and was thinking it was just over 35″ in height by reading the specifications of this product. It is nearly 46″ in height. UPDATE YOUR specifications. I’m unsure if I can fit this in my crawl space. I’m in a bad position now. Do I send it back and go without water for longer? Or do I attempt to fit it in my crawl space? Edit:Today I installed the tank. The box says “HT32B” which is what I ordered, the tank has “HT30B” on the metal plate that has the model # and info. I did not notice this till the tank was installed So I paid for a 32 gallon tank and received a 26 gallon tank. This will also wear on my well pump more than a 32 gallon tank since it’ll run more frequently. This is not Amazon’s fault since the box was mislabled, or the maker screwed things up, however it is late to return it and have water in my home. What a crock this has turned out to be. Something as simple as ordering a tank from the description of the item turns into a snafu.
Great shipping from seller and no complaints on their end. Product works well but at as others have stated, the bottom end/lip that the tank sits on was damaged. This seems to have come from factory as box was in perfect form. The tank itself wasn’t damaged. Most likely a quality control issue at the factory. Taped off the area I required to re-form and used priers and a rubber mallet to flatten the bottom lip out so tank sat properly and did not rock back and forth. Other than that it gets the job done.
Anderson Metals Brass Tube Fitting, 90 Degree Elbow, 3/8" Flare x 1/4" Female Pipe vs HT32-B
The Anderson Metals elbow is made of brass and has flare and National Pipe Taper (NPT) connectors. This 90-degree elbow fitting, also called “ell,” connects two pipes at a 90-degree angle to change the direction of flow between pipes. It has a 45-degree flare connection on one end and an NPT female connection on the other. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting has 45-degree flared construction for a stronger connection than soldered, long-term dependability, and for use in installations where flames or heat aren’t allowed. The operating temperatures vary from -65 to 250 degrees F. This fitting is for use in fuel equipment, plumbing, gas, refrigeration, and vacuum applications. It’s suited for copper, brass, aluminum, and steel tubing.
Elkhart Products 103 1" 1-Inch Copper Female Adapters
Elkhart merchandise company has put the business’s old-style, single-line product philosophy on hold and became an violent, fundamentally changed company, top-down, bottom-up and sideways. You will see it in our new product lines and you will feel it as you work with all levels of our professional staff.
Asov Auto Shut Off Valve, with Jaco Connectors
Easy to install, as the picture shown. The “in & out” markings are on the top of the valve. The top side of the valve is the high pressure side and the bottom side is the low pressure side. The high pressure from the filter housings goes to the “in” on the top of the valve. Then the high pressure “out” goes to the membrane housing inlet. The membrane housing low pressure outlet connects to the “in” on the bottom side of the valve. The “out” on the bottom goes to the tank.
Watts P-610 Quick Connect Male Adapter, 1/2-Inch CTS x 1/2-Inch MPT vs HT-32B
1/2″ Copper Tube Size x 1/2″ Male Pipe Thread, fast Connect Adapter, Hold Up To 250 PSI, 1 part, No Parts To Assemble Or Lose, fast Connect Design lets fast & Easy Connections Without The Use Of Installation Tools, Great For New Installations Or Plumbing fix Projects For Pox, Copper, & CPVC Pipe, Just Cut Pipe & Push Pox, Copper Or CPVC Tubing Into Fitting End till Tubing Seats At Stop, may be Disconnected By Pulling Back On Ring & Releasing Pipe, Code accepted For Behind Wall Without Access & Direct In Ground Burial Installations, NSF-14, NSF-61, CSA/ASTM & UPC Code Listed & accepted, Excellent substitute For Quest & Flare It Type Fittings. The product is made in China. Easy installation and easy handling.
Wobble Wedge, Black, Hard, 300 Wedges
Wobble Wedge shim is a great tool to level your furniture, equipment, cupboards, toilets anything that wobbles. Works on tile or any uneven floor. Stackable for really big wobbles. Has Interlocking ridges make them stackable. Wobble Wedges fix anything that wobbles, level anything that tilts, and tightens what is loose. Exact interlocking ridges molded into the wedges lets them to be stacked to fill big gaps. They’ll not shrink or swell like wood shims.
Libra Supply 1” 90-Degree Elbow C x C, (Pack of 10 pcs, click in for more size options) Copper Pressure Pipe Fitting Plumbing Supply
The 1-inch 90-degree Copper Fitting Sweat Elbow can be used in residential and commercial systems like potable water, air conditioning and refrigeration. The 1 inch 90 degree elbow features solder cups. The fitting gives a means of changing the pipe line direction by 90 degrees. Also to its inherent qualities of beauty, durability and low maintenance, copper’s reusability makes it an ideal application in sustainable projects.
Wilkins 2-975XL2 2-Inch Lead Free Reduced Pressure Backflow Preventer vs HT-32-B
This Wilkins 2-975XL2 is intended to be installed on potable water lines to protect against both backpressure and backsiphonage of polluted water into the potable water supply. This model is perfect for use where lead free valves are obliged and gives protection where a possible health hazard exists.
NIBCO 4818 Series PVC DWV Pipe Fitting, Plug, 1-1/2" NPT Male
The NIBCO 4818 plug pipe fitting is made of PVC for drain, waste, and vent systems (DWV) and has a male National Pipe Taper (NPT) threaded connection. This plug fitting inserts into a pipe or fitting to shut and end its end. It has male NPT threads for connecting to a female threaded pipe, creating a tighter seal than straight threads. This fitting is made of PVC for use in non-pressure residential and commercial drain, waste, and vent (DWV) sanitary systems. PVC resists corrosion and chemicals, exhibits high strength, and weighs less than fittings made from metal. PVC may be connected to other materials like steel, copper, or cast iron using transition fittings. This fitting gives superior flow to metal because of its smooth interior finish, which decreases friction and inhibits increase of materials. This fitting meets American Society for Testing and Materials (ASTM) D2665 and D3311 plans for quality assurance.
Tefen Fitting 1/4" ID x 1/4" NPT Male Threaded Elbow Hose Connector 10 Pack
NPT Male Elbow Hose ConnectorApplications: Fittings particularly suited for connecting plastic, rubber of soft p. V. C hoses in industrial and domestic applications. As these hoses have different wall thicknesses the size is by ID measurement. Comments: Strong and lasting. Assemby: Tubes dressed onto barbed rear of fitting and secured with Tefen snap clip. Material: Nylon 66 Working Pressure: 14 bar (200 psi) Max at +20 C Temperature:-+4 C up to +90 C (+40 F up to +195 F) – subject to application. Color: Nylon 66 Standard: accepted by NSF/ANSI 61 – Health effects.
WestBrass D12108 Polished Chrome 1/2 in. IPS x 8 in. Pipe Nipple
Westbrass is a Los Angeles-established company that sells a large range of Plumbing expertise merchandise, Bath Waste & Overflows, also as Decorative Kitchen & Bath Accessories global. The buyer base will include kitchen & bath showrooms, plumbing wholesalers and supply houses, also as many national home centers. Standard Brass Air Gap CapStandard air gap cap only.
Sds Supply Z075T2-2 Zone Sentry Threaded Valve , 3/4-In. – Quantity 12
Taco, 3/4″, Zone Sentry Zone Threaded Valve, supply On-Off, usually Open Or usually Closed Control In Both Open & Closed Hot Or Chilled Water Hydronic Systems, may be Used In A large range Of Heating & Cooling Applications, Savings & Efficiency, Patented Technology & Microcircuit established Logic, Draws Just 1. 44W When On & Is Expandable To Up To 12 Zone Valves Per Standard 40 VA Transformer, Saving On parts, Adds Up To A Zone Valve, Flow Capacity CV, Shutoff Pressure ranking, easy Installation & Diagnostic capability.
Wilkins 1-375XL 1-Inch Lead Free Reduced Pressure Backflow Preventer
This Wilkins 1-375XL is intended to be installed on potable water lines to protect against both backpressure and backsiphonage of polluted water into the potable water supply. This model is perfect for use where lead free valves are obliged and gives protection where a possible health hazard exists.
- Brands2O TC2104-P2 Well Pump Pressure Gauge
- Water Source Llc Rv50-nl 1/2-Inch Pressure Relief Valve No Lead 75 PSI
- Square D by Schneider Electric FSG2J24CP 40-60 PSI Pumptrol Water Pressure Switch
- 1 x 11 Tank Tee Kit with VALVES Installation Water Well Pressure Tank SQUARE D 40/60 FSG2 pressure switch NO LEAD
- Parts2O FP78-7LF Long Tank Tee
- Square D by Schneider Electric FSG2J21CP 30-50 PSI Pumptrol Water Pressure Switch